Where did you get the threaded handguard spacers? I bought a Tusk handguard kit for the Tenere but had problems with the expanding anchor making the throttle stick. I need those spacers @13:10 !!
Hi ,great work, next time when you will remove a grip try to put a syringe with alcohol and you will see amazing remove or insert a new grip, happy holidays !!
Not currently, but we are looking at adding them to our website. Attack Graphics still has this design so if you wanted this exact graphics kit, one could be made up for you. Just place an order (either online or by phone) of an Attack Graphics complete graphics kit for a full size bike and email attackgraphics@rockymountainatv.com with your order number letting them know you'd like the Yamaha Tenere 700 graphics and we'll get you taken care of!
I've tried these on other bikes and seen them on friends bikes. Ultimately you lose reliability. The slave cylinder seals and plunger tend to leak and ive seen the line melt from hitting the exhaust. Never have those problems with a cable pull system.
Cable clutches have their own set of pros and cons but both systems still require maintenance and can leave you stranded if not kept up on. The line hitting the exhaust sounds like an installation oversight. Thanks for checking out the video and leaving your feedback!
@@Toonces311 idd specialty because evey single one that is on the show floor is already payed for (by the dealership no matter if they sell it or no). Normally the only one that gets shafted is the end consumer
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Can you do an installation video on a YZ 125 plz
Nice video, thanks
Where did you get the threaded handguard spacers? I bought a Tusk handguard kit for the Tenere but had problems with the expanding anchor making the throttle stick. I need those spacers @13:10 !!
Hi ,great work, next time when you will remove a grip try to put a syringe with alcohol and you will see amazing remove or insert a new grip, happy holidays !!
What is preferable when doing a trans-African adventure? Hydraulic or manual?
The switch works? Can't start the bike in gear :|
Do you make/sell T7 graphic kits like installed on your shop bike? I could not find them on your website. Thank you.
Not currently, but we are looking at adding them to our website. Attack Graphics still has this design so if you wanted this exact graphics kit, one could be made up for you. Just place an order (either online or by phone) of an Attack Graphics complete graphics kit for a full size bike and email attackgraphics@rockymountainatv.com with your order number letting them know you'd like the Yamaha Tenere 700 graphics and we'll get you taken care of!
Could I use one of these on my xr650l
Unfortunately, Magura doesn't list a HYMEC clutch for the Honda XR650L.
I've tried these on other bikes and seen them on friends bikes. Ultimately you lose reliability. The slave cylinder seals and plunger tend to leak and ive seen the line melt from hitting the exhaust. Never have those problems with a cable pull system.
Cable clutches have their own set of pros and cons but both systems still require maintenance and can leave you stranded if not kept up on. The line hitting the exhaust sounds like an installation oversight. Thanks for checking out the video and leaving your feedback!
Yea for 400 bucks I will stick the cable and one finger cluch
296 now so it's not that bad as of today
@@donut3110 personally I would rather spend that 300 bucks on new boots or a set of tires.. not woth the money to me
have you used a hydraulic clutch? there's an enormous difference in fatigue@@gabrielkopp2036
imagine if they had put one from factory......
then the bike wouldn't be under 10K
@@Toonces311 just lol, yamaha has been cutting corners on everything the yz 2 stroke models being the worst offenders
@@Sustrii Yamaha has sold every single T7 they made. They're doing something right.
@@Toonces311 idd specialty because evey single one that is on the show floor is already payed for (by the dealership no matter if they sell it or no).
Normally the only one that gets shafted is the end consumer