***ACTUAL WEIGHT OF PULL*** (and possible advertising point) I measured the clutch pull using a gun trigger scale after the install, in the middle position, I got 7.25 pounds at the end of the lever, 11.5 where the index finger would sit. I did not measure it before the install, but WOW this feels better. VERY much worth the purchase. I love what you guys make, the level of community engagement and these tutorials are awesome. Thanks! Also, 6:24 HELPFUL NOTE: put a fine paint/sharpie mark directly in line with where your OEM clutch arm was, that way you are SURE it is in right, and it's MUCH easier to find. Bending that little cotter pin was the hardest part of this install LOL
Rode mates 2023 bike last week and the clutch pull and feel offroad is fine , very lite clutch pull aswel, was great riding it slow and fast, I think the 2024 bikes will be having a quick shifter
I guess i got the last of the V1 batch because i didn't get the new circlet or washer lol would've been nice but I worked near the dealership luckily and got a new one.
We need a real shorty lever to complement this!! i ended cutting the oem one to make it 2 or 1 finger but its a bit rudimentar, we need camel ADV quality!!
If you look on the product page, there is a note that the current run of 1 Finger Clutch kits do not have springs included. The OEM spring is compatible. The kit price was reduced because the deleted spring.
Will this change the position of the clutch lever? The tip of my lever is pretty close to the barkbuster and there is no more room for it to move outwards
@CamelADV can you please advise , is there any reason why if you want it to be light why you wouldn’t just use the furthest hole in the arm ? I ask as a lot of people seem to use like you have the middle hole …..? What are apart from the lightness in pull functioning differences between the middle and last hole ? Does the friction zone get even larger on the last hole meaning you will have to pull the leaver in further to full engage the clutch ? I ride with 3 fingers always wrapped round my grip to need the clutch to fully work before the lever would hit my fingers…..🤷♀️
***ACTUAL WEIGHT OF PULL*** (and possible advertising point)
I measured the clutch pull using a gun trigger scale after the install, in the middle position, I got 7.25 pounds at the end of the lever, 11.5 where the index finger would sit. I did not measure it before the install, but WOW this feels better. VERY much worth the purchase. I love what you guys make, the level of community engagement and these tutorials are awesome. Thanks!
Also, 6:24 HELPFUL NOTE: put a fine paint/sharpie mark directly in line with where your OEM clutch arm was, that way you are SURE it is in right, and it's MUCH easier to find. Bending that little cotter pin was the hardest part of this install LOL
If this would have been out a day ago I would have saved myself an hour of time with that dang snap ring. Glad you made the update.
safer to use both methods anyway haha
I literally just purchased mine for the T7 and now I discover there's a new and improved version of it 😅
Great instruction. Installed mine today. Will test-ride tomorrow 👍🏼
another amazing video and explanations, Thank you very much for this effort, i really appreciate
Great install video!
Worked great! Easy to install following your video. So much easier pull! 👍✌
where can I buy this new version for the t7, I'm from Portugal, thank you
Rode mates 2023 bike last week and the clutch pull and feel offroad is fine , very lite clutch pull aswel, was great riding it slow and fast, I think the 2024 bikes will be having a quick shifter
muchas gracias por la explicacion para la instalacion
Since the T7 shares the same engine as MT07, I am assuming it works for both bikes, or does it not?
Maybe too late but: yes it does
@@Baddadam not late yet, I will need it in a few months still. Thanks for the reply :D
I guess i got the last of the V1 batch because i didn't get the new circlet or washer lol would've been nice but I worked near the dealership luckily and got a new one.
Love this! Can't wait to get one
We need a real shorty lever to complement this!! i ended cutting the oem one to make it 2 or 1 finger but its a bit rudimentar, we need camel ADV quality!!
Very helpul, with bonus free-play PSA!
Why does my kit does not have a spring ?
If you look on the product page, there is a note that the current run of 1 Finger Clutch kits do not have springs included. The OEM spring is compatible. The kit price was reduced because the deleted spring.
How come you do offer the silver? The silver is fetch.
Will this change the position of the clutch lever? The tip of my lever is pretty close to the barkbuster and there is no more room for it to move outwards
Try moving the lever mount inwards down the handle bar , do the same for the brake lever ,you get more leverage and feel 😅😅😅
I have an MT07 and I wonder if I can use this part on it. Does someone know?
Look at it and compare. I'd hazard that it's a no but who knows.
It does work
Will this work on a mt07?
Yes it does
Ok, who made that carbon fiber tank...
@CamelADV can you please advise , is there any reason why if you want it to be light why you wouldn’t just use the furthest hole in the arm ? I ask as a lot of people seem to use like you have the middle hole …..?
What are apart from the lightness in pull functioning differences between the middle and last hole ?
Does the friction zone get even larger on the last hole meaning you will have to pull the leaver in further to full engage the clutch ? I ride with 3 fingers always wrapped round my grip to need the clutch to fully work before the lever would hit my fingers…..🤷♀️
Sounds like you've become popular with CP2 .