Это видео недоступно.
Сожалеем об этом.
How to Rebuild a Honda Automatic Transmission Part 2 Disassembly BAXA 4 Speed Automatic
HTML-код
- Опубликовано: 3 фев 2016
- Part Two of multi part series walkthrough of tearing down, cleaning and inspecting, and rebuilding, overhauling and reassembling Honda Automatic Transmission Transaxle complete guide tutorial secrets tips advice. How to rebuild honda and acura transmissions BAXA BAYA BMXA BVGA MDKA
Music by teknoaxe royalty free music check him out thanks bro!!
compressor: let me sing you the song of MY people!
I wish that was my transmission or they was a local transmission Rebuilder for Honda's near my area....Knoxville,tn
Hola amigo una pregunta tengo una caja continua de crv 2002.. Se me quebro el transfer y parte de caja.. Quisera quitar parte de la caja y no desarmarla toda se podria hacer eso.. Gracias
What size is that bolt on top of the gears again
Hello. My car is honda accord cl7 2004 and she was run smoothly just now gear shifting at damn exact parameters. Such as. 1 gear to 2nd gear at 1600rpm. 2nd to 3rd shifting good depend on throttle. But 3rd to 4th after 41km/ph. No meter the engine load and the rpm. But the RPM normal at this point much 1800rpm. Than 4th to 5th above
where is the filter situated in the gearbox
part 2!
is any gear puller ok? or do you need a specific one?
Where were you when my 04 accords transmission went out 😂
What tool works to pull the gears for cheap? Is there a specific tool I need for this transmission?
You can use two pry bars be careful not to chip the gears. Power steering puller is what I prefer. You will need extra long bolts or make your own though
Can you find a link for one to buy at harbor freight or autozone?
Where did you get the Long bolts to pull the gears????
Wendell Greenidge made them welded two bolts together
MaLIBoo you clever, clever dog you... lol
The valve cover bolts work too if your in a pinch
Is there a specific tool to pull the gears? Someone said valve cover bolts work... What else would I need?
Is there something I can buy or throw together?
@@michaelchristopher94 valve cover bolts??? Nah I just went to ace hardware and got the longest m6x1.0 bolts I could find and used an steering wheel puller with extra large washers to get it done but I have used just a pry bar before but that can damage the case if you don’t know what you’re doing
How many quarts of oil does this transmission take empty after a rebuilt empty torque converter empty Transmission
7.5.-8.5 quarts
Also, these can be checked running or not running in park
@@OKxMaliboo thank you for the reply brother much appreciated
You should not put background music
Doesn't he have a proper toolkit ?
i dont think this is a "how to" video. No instruction at all. Perhaps this should be called, "watch me rebuild this transmission from a static
perspective while playing heavy biker music". Whoopee. Thanks but really....why bother???