Great video! I’m getting ready to do mine will definitely clamp off the hose even tho I did buy 2 things of coolant Incase and fresh oil of course. I hope mine goes smoothly
Great video man, I’m wondering if it’s essentially the same process for a 2012 ford f150 3.5 ecoboost? Cracked the oil filter adapter when installing new sensor.
Ive seen other videos which showed sometimes the adapter plate gets buggered up and has to be fine sanded in order to seal, so just slipping a new gasket in would actually not work.
I just can't figure it out. I pinched the radiator hose and to be safe I pinched the hose from the bottle as well. When I pulled the hose off, radiator fluid poured from the housing itself. Just a free flow of gushing radiator fluid until I put the hose back on. I double checked my clamps and tried again and same.
NEW TO YOUR CHANNEL. IM NOT EXACTLY SURE WHICH VEHICLE IS IN THE VIDEO, BUT I AM SURE I WOULD LOVE,LOVE THAT MUCH ROOM AND LINE OF SIGHT FOR THE 05 5.4 F 150 4X4 IM ABOUT TO GET INTO! SMH!! THESE IDIOT-GENEERS!! IT SHOULD BE MANDATORY AT LEAST ONE YEAR TURNING WRENCHES,BEFORE THE FIRST DAY IN ENGINEERING COURSES!! THX FOR THE INFO,LIKE HOW YOU APPROACH THE BOLTING AND U BOL TING!!
Keep making videos. This is the best one I've seen to date when it comes to "how to". GREAT JOB!
Your video was better than lmr and that speaks volumes. Got a sub forsure.
Ok there's a lot of videos this helps me the most
Great video! I’m getting ready to do mine will definitely clamp off the hose even tho I did buy 2 things of coolant Incase and fresh oil of course. I hope mine goes smoothly
How did it go and how much coolant did you have to replace it with? Thinkingvaboit tackleling this myslef
Amigo 👍 Appreciate it, have adapted same habits, think this is my problem. No for sure my pickup tube is clogged last owner never did anything.
Great video man, I’m wondering if it’s essentially the same process for a 2012 ford f150 3.5 ecoboost? Cracked the oil filter adapter when installing new sensor.
Great video. I have to replace gasket in my Crown Victoria. 4.6 should be same/similar steps, yes?
Mint. Great video man. Gotta do this on my 2005 F150 4.6
Ive seen other videos which showed sometimes the adapter plate gets buggered up and has to be fine sanded in order to seal, so just slipping a new gasket in would actually not work.
Awesome video my friend 👍
Thank you 👍
@@FalconsGarage Was this a 2wd? My truck is 4x4 and it is much harder to see the part
Great work
Thank you so much 😀
Thank you so very much.
Any time!
Great Job, I received a quote for $800 to repair my Jeep Grand Cherokee. Would you say this is accurate???
Great video!
Thanks!
An absolute nightmare on a four wheel drive
Dealing with that right now , can it be done without dropping the diff? Or can you get it with wobble sockets and extension?
You’re not lying this is a nightmare. Oh my gosh.
I just can't figure it out. I pinched the radiator hose and to be safe I pinched the hose from the bottle as well. When I pulled the hose off, radiator fluid poured from the housing itself. Just a free flow of gushing radiator fluid until I put the hose back on. I double checked my clamps and tried again and same.
yeah .. but you still have coolant in the block .. so its normal
Are you sure this is navigator 03? Why isn't there a differential under the base? And my '04 has a differential blocking the handling space?
The link for the gasket says its currently unavailable but is that one the same one for a 2007 f150 4.6?
i believe so
Need models/1999-2000 models. Some have oil cooler and out rig for filter.
Im about to do mine today but mine is 4x4😮
I’m doing the same thing
I have this issue with my 2013 F150, are you located in NJ by chance?
no sorry
Hey man I had a question my brother bought a 2009 dodge hemi motor and wants to put it in his 2006 dodge charger would it work ?
is the charger a hemmi too?
Someone told me I have to remove the 4x4 axel ? My is a 2005 f150 5.4 3v 4x4 crewcab..can it be done the way he shows ?
Probably can do it without pulling. It will be a pain though. Just did my 2010 f150 5.4 3valve 4×4 and it was tight but manageable
Is this the same process for the 6.2L Raptor?
no i believe the oil filter housing is different
How do you pinch off the hose?
How To Pinch Off Coolant Hoses
👍🏻
NEW TO YOUR CHANNEL. IM NOT EXACTLY SURE WHICH VEHICLE IS IN THE VIDEO, BUT I AM SURE I WOULD LOVE,LOVE THAT MUCH ROOM AND LINE OF SIGHT FOR THE 05 5.4 F 150 4X4 IM ABOUT TO GET INTO! SMH!!
THESE IDIOT-GENEERS!!
IT SHOULD BE MANDATORY AT LEAST ONE YEAR TURNING WRENCHES,BEFORE THE FIRST DAY IN ENGINEERING COURSES!!
THX FOR THE INFO,LIKE HOW YOU APPROACH THE BOLTING AND U BOL TING!!
that would be amazing . defiantly a pain on a 4x4 car
Soooo much harder on a 4x4!
Very true
Do a 4×4 that shit to easy