DJI Propeller Issue ⚠️
HTML-код
- Опубликовано: 1 июн 2024
- DJI Mini 4 pro, DJI mini 3 pro and other DJI drones have an orange tip on the edge of the propellers. This part of the DJI propeller can come loose over time and it’s important to replace the propellers when this happens.
Thanks for watching!
☕️ If you feel that this was a video worth a cup of coffee ☕, here is the link: geni.us/buymeacoffe
Thank you so much! ☕️😃
💌 Get MORE, directly to your INBOX! - Signup to my newsletter: geni.us/join-creator-now 💌
⭐️ ⬇⬇ HIGHLIGHTED IN THIS VIDEO ⬇⬇ ⭐️
❋ Propellers: geni.us/DJI-mini-4-pro-props
❋ Propellers + Screwdriver 3rd party: geni.us/mini4pro-props-driver
🪛 Propeller ScrewDrivers: geni.us/Propeller-screwdrive
⬇⬇OTHER GEAR USED IN THIS VIDEO⬇⬇
📷 Sony A7S III: geni.us/sony-alfa7sIII
🎤 Rode Wireless PRO: geni.us/rode-wireless-pro
👜 PolarPro Slate II - SD Card Case: geni.us/PolarPro-Slate2-SD-Mo
🏗️ Peak Design Travel Tripod: geni.us/mk-pd-traveltripod
⬇⬇ VIDEOS YOU SHOULD PROBABLY WATCH ⬇⬇
How to replace DJI Mini 3 / 4 Pro propellers: • AVOID CRASH! How to co...
⬇⬇ FOLLOW & SUBSCRIBE ⬇⬇
This channel: geni.us/MK-creator
Instagram - / matskellerman
My Tech channel: geni.us/MK-Tech
My Vlog channel: geni.us/mk-vlog
--- MY MICROPHONES ---
🎤 Rode Wireless PRO: geni.us/rode-wireless-pro
🎤 Sony ECM-B1M: geni.us/sony-ECM-B1M
🎤 DJI Mic 2: geni.us/dji-mic-2
🎤 Rode Lavalier II: geni.us/rode-lavalier-II
🎙️ Rode NTG3: geni.us/rode-ntg3-black
🎙️ Røde PodCast USB: geni.us/rode-podmic-usb
🏗️ Stand for PodCast mic: geni.us/rode-ds2-stand
--- MY CAMERAS ---
📷 Sony A7S III: geni.us/sony-alfa7sIII
📱 iPhone 15 Pro Max: geni.us/iphone15-pro-max
📷 Insta 360 Go 3: geni.us/insta-360-go3
📷 Insta 360 X3: geni.us/insta-360-x3
--- MY LENSES ---
📷 Sony 24 mm GM f/1.4: geni.us/sony-24mm-Gmaster
📷 Sony 90 mm Macro f2.8: geni.us/sony-90mm-macro
📷 Tamron 17-28 mm f/2.8: geni.us/tamron-17-28mm
📷 Tamron 28-75 mm III f/2.8: geni.us/PJb8J
📷 Tamron 70-180 mm III f/2.8: geni.us/tamron-70-180-emount
--- MY FAVOURITE DRONES ---
🚁 DJI Mini 4 Pro: geni.us/dji-mini4pro
🚁 DJI Avata 2: geni.us/DJI-Avata-2
--- DJI Mini 4 Pro ACCESSORIES ---
🥢 Spare Control Sticks: geni.us/dji-control-sticks
🪫 Charging hub: geni.us/DJI-charging-hub
🫙Micro SD card: geni.us/kingston-micro-sd-card
🔌 30 watt charger: geni.us/dji-30w-charger
--- DJI Avata 2 ACCESSORIES ---
❊ Propellers: geni.us/DJI-Avata2-propellers
🔋Batteries: geni.us/DJI-Avata2-battery
🕶️ ND Filter: geni.us/Freewell-avata2-nd
💿 Kingston Micro SD Card V30 128gb: geni.us/Kingston-canv-go-128
💿 Kingston Micro SD Card V90 256gb: geni.us/kingston-V90-256gb
💿 SanDisk Micro SD Card V30 256gb:geni.us/sandisk-V30-256gb
--- CAMERA ACCESSORIES ---
ND FILTER
🕶️ PolarPro Peter McKinnon VND: geni.us/PeterMckinnon-vnd
TRIPODS & HOLDERS
🏗️ Peak Design Travel Tripod: geni.us/mk-pd-traveltripod
🧵 Peak Design Camera Leash Strap: geni.us/peakdesign-leash-strap
🏗️ Peak Design V3 Camera Clip: geni.us/PeakDesign-V3-capclip
🏗️ Manfrotto Articulated Arm: geni.us/articulate-arm-196AB-2
Green Screens etc.
🟩 Elgato Rollup Green Screen: geni.us/elgato-gscreen-rollup
GIMBALS
🏗️ DJI Ronin RS3: geni.us/DJI-Ronin-RS3
🏗️ Dual Grip for Ronin: geni.us/DJI-Ronin-dualgrip
STORAGE
💾 Secure Storage via Proton: geni.us/Proton
👜 PolarPro Slate II - SD Card Case: geni.us/PolarPro-Slate2-SD-Mo
📀 Lexar SD card: geni.us/Lexar-2000X-V90-128GB
📀 Samsung x5 SSD: geni.us/samsung-x5-ssd
📀 Synology DS923+ NAS: geni.us/Synology-923plus
--- MY BAGS, BACKPACKS ---
🎒 Peak Design EveryDay Backpack 30L: geni.us/KGkt
--- CAMPING CHAIR & TABLE ---
🪑 Helinox Chair One: geni.us/helinox-chairone
🟫 Helinox Table One: geni.us/helinox-tableone-hardt
--- MY FAVOURITE PROGRAMS & APPS ---
💌 Secure Email, Storage & VPN: geni.us/Proton
🖥️ Vivid - 2x Mac Screen brightness: geni.us/vivid-app
🕹️ DroneLink: geni.us/dronelink
--- ALL MY GEAR and EQUIPMENT ---
Kit.co: geni.us/kit-mats-kellerman
*As an Amazon Associate, I earn a small commission from qualifying purchases. The majority of, or all of the links above, are affiliate links with Amazon, or affiliate links with other brands or platforms. 
Наука
![THE PROP SHOOTOUT of the Century! - [Master Airscrew & others] - DJI Mini 2 & Mini SE](http://i.ytimg.com/vi/ahka-oD6rWk/mqdefault.jpg)
Thanks for watching!
☕ If you feel that this was a video worth a cup of coffee ☕, here is the link: geni.us/buymeacoffe
Thank you so much! ☕😃
💌 Get MORE, directly to your INBOX! - Signup to my newsletter: geni.us/join-creator-now 💌
⭐ ⬇⬇ HIGHLIGHTED IN THIS VIDEO ⬇⬇ ⭐
❋ Propellers: geni.us/DJI-mini-4-pro-props
❋ Propellers + Screwdriver 3rd party: geni.us/mini4pro-props-driver
🪛 Propeller ScrewDrivers: geni.us/Propeller-screwdrive
⬇⬇OTHER GEAR USED IN THIS VIDEO⬇⬇
📷 Sony A7S III: geni.us/sony-alfa7sIII
🎤 Rode Wireless PRO: geni.us/rode-wireless-pro
👜 PolarPro Slate II - SD Card Case: geni.us/PolarPro-Slate2-SD-Mo
🏗 Peak Design Travel Tripod: geni.us/mk-pd-traveltripod
⬇⬇ VIDEOS YOU SHOULD PROBABLY WATCH ⬇⬇
How to replace DJI Mini 3 / 4 Pro propellers:
• AVOID CRASH! How to correctly replace...
⬇⬇ FOLLOW & SUBSCRIBE ⬇⬇
This channel: geni.us/MK-creator
Instagram -
/ matskellerman
My Tech channel: geni.us/MK-Tech
My Vlog channel: geni.us/mk-vlog
This happens to me to!!! I own the DJI mini 3 non pro. I think it happens when you take the drone in and out of the bag. Once I stopped taking the drone out the bag it never happened again.
So you stopped flying it 😂😂😂😂
Great advice 😂
😊
@@WilliemBills I still fly. I just never use the FMC Bag. I just keep it on my desk
My Mini 3 pro got a crack in one prop but continued flying well. When being in a better place a change was done. Then I saw the other blade had lost the tip just like You showed!
Also found out a nice way to handle those tiny, fiddly screws. Put the screw into the prop. Then add the screw driver and approach the motor and screw it on.
Thanks for the tips 😊
Good reminder to make "checking all your props before launch" a part of your pre-flght check.
I have replaced at least a dozen sets over the past 2 yrs. Now, when possible, I dab a bit of crazy glue on the separating area= seems to work fine..
Thank you! I’ll check them now
Many thanks for that will keep my eyes on them from now on 😊
Thanks for sharing,i’m going to check it on my mp4 🙏🏻👍🏻
I had that when checking my drone over and changed all of them for new ones and noticed the sound pitch was different. That was the main reason why I did a more extensive check for hair lines, fine chips, or anything else with a torch, noticing the orange tip was loose and wasn't sure on another if was a hair line mark or some weird scratch.
Thanks for that, I will check later
Same issue on the Air 3. Just buy Master Airscrew stealth props. About the same price but last much longer because they are one piece/material. A little bit less finger friendly without the rubber tip but the sound better and are safe to use
All I use!
Have the M3P - Good to know. Appreciate that!
I just watched your video on how to use a drone for beginners and enjoyed the content and info you have provided. Obviously, I'm new to drones and looking to buy my first drone in a couple of months. I will be sure to watch your videos for future reference. Thank you!
Thank you so much! 😃👍🏼
very wothful info, thanks a lot. i'm happy all my props on M3p and M4p are in good shape, but i'll checks them regularly from now on ! (as I always do flying propdriven airplanes !)
Thanks.
It is a rubber tip,they say it is for safety.i always check every propeller before every flight😁
Jup. Many of the 3rd party propellers don’t have that rubber protective tip.
Good tip thanks for sharing
Thank you. I hope it will at least help someone 😃👍🏼
A reason would be great, been flying mine without them… 🤷🏼♂️🤷🏼♂️
Thanks. The question is have you tried flying it without those four orange tips from each props?
After i crashed my mini 3 a while back i just flew with two propellers having no tips and the other two having them lose. Didn't affect stability but it made it lowder. I also didn't feel any performance differences, only that it is significantly louder.
Thanks for the reply@@GenevaConventionViolator
Same thing on M3 DJI drones. It is not a major problem since you can fly with partially damaged orange piece without any issue. If you want to replace these at the slightest peeling off we are not finished!
Thank you for this information. I will check mine right away. Like # 266!!!
Mine seemed to do that after just a couple of short flights on my Mini 4 pro...
I know it’s very annoying. I linked to some third-party propellers and they don’t have these soft piece at the edge. The purpose seem to be less dangerous if it flies into things or people.
I use a prop strap and a hardcase. Never had a prop issue like this unless i crashed lol
Had the same issue causing my drone to drift. changed and now everything works as it's meant to be.
Thank you so so much for sharing your experience
What about the dji mini 2?
Maybe it would be ok just to take all rubber tips off? Just curious
I fixed the loose orange propeller tip with a very small piece of Tesafilm and everything was okay again. Although of course I am not sure whether the aerodynamic properties of the propeller cannot change minimally. Even if I haven't observed any different behavoir since then.
Thanks for sharing! Personally I will replace the propellers. Feels like a fairly important part of the drone 😂
adding anything to the prop will make it out of balance...you would have to add exactly the same amount of weight to all the other props for this to work...not advisable
The propellers are indeed very important …
This is an interesting topic. It may or may not be true. If we take into account that the main forces are dominated by the lift forces of the propellers, wind and acceleration, compared to the minimal weight (< 1 mg) of the small piece of plastic, size 0.5 x 1.0cm, this can work quite well and safely as a temporary solution. Of course, original propellers are always the best option...
Great tip, who knew?
Dji should make their props “strong like bull”🐂 🤪
I had the same issue. Very annoying
When you clip some tree leaves or thick grass/ weeds when landing is what I’ve experienced
i flew my mini 4 pro full speed into a gazebo and the only thing that was damaged was the orange part of the propellers. replaced and everything was fine
I have 2 of these broken edges on my mini 3 pro propellers. But i kept on flying without those rubber edges for 30+ hours without any issue. And another one of them detached completely during flight. But i am facing no problem. Although its good to change. Because the drone is much more expensive than $9 prop
Thanks for sharing. Other than the obvious that the aerodynamics is slightly affected as well as the propellers being more likely to cause harm if they touch anything or anyone, I can also imagine that a slight unbalance could affect the lifespan of the motors.
My mini 3 pro done 130 flight flights , never had a problem with the propellers .. Check your propellers on a regular basis , and they are there for safety purposes ...
maybe people are just being heavy-handed with them ... 👍
Thanks for sharing. With this I also wanted to highlight that we should not only throw the drone up in the air every time without actually looking, touching and assessing the critical parts :)
Newsflash (?) I have the same problem with one of my Mavic3 propellers. Beside of the mini's, everyone should take notice and check regularly
They are made to break. Just bought aftermarket cause I’m not going to be ensalved by a Corp
how’s everything going?-professional dji, take it easy,
That's BS Dji made them that way. I realize props are only $10 for replacements, but surely a better way could have been done as far as manufacturing.