Been wanting to ceramic coat my car but I figured i would do a bad job like the people did on the truck and was scared too. Plus don’t have idea conditions to let it cure properly so I’ve been hesitant. Watching this video gave me a lot more info on how I should go about it. Great video guys!
Go for it. They have so many video lessons to help you do it right and you can see here, that it is not a big deal if you make a mistake. You got this!
i dont see how you can go wrong.. there is a lot of ceramic on market, take an easy to work with and no prob. there is nothing difficult. its like putting wax, with more caution thats all, it just need a proper wash before and there you go
This helped so much; Had a job which was done by a previous detailer and it was on a Daher Kodiak 100 aircraft. Black paint; orange peel ALL OVER. Eachtime the aircraft came in for maintenance I would wet sand, buff, and re-ceramic.
Very useful information! Thank you guys! Here's a video request.. The different Torque tools for specific detailing. I'm looking to purchase one just don't understand the difference between them.
Hey what kind of polishing pad would you recommend for polishing aluminium wheels on a semi an can I use my torque polisher thanks for the video I am a die hard fan of all of your products also when will you get the snubby power washer gun back in stock thanks
hey Chemical Guys, im gonna start coating my car and i got a question: when do i need to refill the applicator? How do i know that insert the enough or less amount of coating? Best regards. Keep thoose videos coming.
@@shalanigrant1754 I tried it last week using the Chemical guys P4 compound. I only had an electric drill, so I used foam pad attachments and it worked ! You may have to do it a couple times, but it removed the rainbow streaking, and removed high spots / visible spots. I no longer have annoying streak marks visible from inside the car anymore.
Hi Steve! Ceramic can be used as a standalone barrier of protection or layered with your favorite glaze, sealant and wax for added gloss and durability.
Hi Jason! P4 contains a very fine abrasive that refines the clear coat. V38 contains no abrasives but is great for jeweling the finish as a final polish.
I need help guys responses would be great I ceramic coated my truck it turned out awesome it didn’t have any streaks until a few days later I looked at the roof and saw a small circle of ceramic on the roof it’s a bit on the edge I didn’t wipe away so does it become permanent the longer I leave it in or can I compound and polish it later if possible
@@ChemicalGuyswhat if I left my coating for a month and I barely noticed high spots on the side doors, can I still be able to remove them with a regular compound? Or do I need a more aggressive compound? Before I applied the coating I did a 1 step paint correction with 3D ONE compound. Will that be able to remove the high spots ?
I had a pretty poor effort from a dealer when I collected my M6 and it was polished and ceramic coated. I need to remove the ceramic then correct the poor polishing attempt they did. Should I wash, clay, then polish removing the ceramic? Thank you in advance.
If you can afford an M6 you clearly aren’t financially strained, and you don’t seem to have a strong understanding of what you’re getting into. Personally I would suggest hiring a professional detailer to handle it, and then send the BMW dealership the bill.
I had someone donthis to my new 2023 suburban they did a horrible job i have this ugly looking glaze in different spots all over my suburban. Now thinking i have to pay someone to at least make it look better
This is what happens when you go to the cheaper guys looking for low price ceramic coating application process. That’s what that person gets for going to a hack next time when you met a real detailer and he tells you 1k for the job don’t go running off like a broke boy lol it pays the cost to be the boss
Been wanting to ceramic coat my car but I figured i would do a bad job like the people did on the truck and was scared too. Plus don’t have idea conditions to let it cure properly so I’ve been hesitant. Watching this video gave me a lot more info on how I should go about it. Great video guys!
Thanks for watching!
Go for it. They have so many video lessons to help you do it right and you can see here, that it is not a big deal if you make a mistake. You got this!
i dont see how you can go wrong.. there is a lot of ceramic on market, take an easy to work with and no prob. there is nothing difficult. its like putting wax, with more caution thats all, it just need a proper wash before and there you go
@@suricateenerve165 a proper wash... followed by iron decon, clay bar, a quick polish, and an IPA wipe.
@@DhDetails87 yes. A proper wash.
This helped so much; Had a job which was done by a previous detailer and it was on a Daher Kodiak 100 aircraft. Black paint; orange peel ALL OVER. Eachtime the aircraft came in for maintenance I would wet sand, buff, and re-ceramic.
Glad you enjoyed the video!!
Very useful information! Thank you guys! Here's a video request.. The different Torque tools for specific detailing. I'm looking to purchase one just don't understand the difference between them.
Hey! Thanks so much for watching. Check out this video.
ruclips.net/video/QBtE1cSCFqs/видео.html
@@ChemicalGuys it would help when doing a tutorial like this, I would be specific with the speed setting you used with the P4.
You need to make some videos on cleaning Atvs, Dirt bikes, and SXS
Great suggestion!
Show them Joey. Nice work. 👍
Thanks 👍
chemical guys everything... just waiting for the Chemical Guys Cereal Box with Chemical Guys 2% Milk
lol
Happy detailing!
If you notice it in time, you can add coating to reactivate the initial layer then wipe off. Thats too bad for the customer.
Great feedback!
That’s a good tip. Especially to those who work on Matte painted surfaces.
Which more aggressive compound would you recommend if P4 doesn’t get it?
Thank you for this video! ❤
Yeah I overapplied on my hood. Atleast it's easy to fix. Thanks for the vid
Thanks so much for tuning in!!
Did you say that the "Wipe Out" product removes seants, waxes, etc's"? Thanks
Why dont u use rotary polisher. Isnt better orbitary ? What about scratches and swirls?
Thank you
Excellent work
Happy detailing!!
please please do a video on how to correct streaking on ceramic leather coating. my car is an absolute nightmare. thank you!
Hey! Thanks so much for your suggestion.
Hey what kind of polishing pad would you recommend for polishing aluminium wheels on a semi an can I use my torque polisher thanks for the video I am a die hard fan of all of your products also when will you get the snubby power washer gun back in stock thanks
Hey Ben! Try using an Orange Hex-Logic Pad with metal polish to restore a mirror-like shine.
@@ChemicalGuys thanks for the reply I will try that
Is it a party foul to mix different brands of coatings if you’re correcting a mistake on a previous application?
Hey! It is recommended to use the same line of products however it is not mandatory.
hey Chemical Guys, im gonna start coating my car and i got a question: when do i need to refill the applicator? How do i know that insert the enough or less amount of coating?
Best regards. Keep thoose videos coming.
Hello! Thanks so much for your message. Check out this video.
ruclips.net/video/K5D37E61No0/видео.html
How would you remove a spot that dripped on a bumper and hardened. I have a small run on the front bumper that fully hardened.
Hey! Machine polishing is the most effective method of removing hardened ceramic.
What if the PPF wrapping has several small bubbles, do u apply ceramic coating over it?
How to ensure,if I removing the excess coating or the coating itself,during levelling
How much would a job like this cost for the entire car??
Does this car have orange peel? Kinda looks like it does but slightly
Would this process also apply to removing/fixing with hydro slick?
Absolutely!
How is the finish maintained? Hydrocharge?
Hey! Use HydroSuds and HydroSpeed to maintain all of your coatings.
Can you just claybar then apply the ceramic coating?
Hey! It is recommended to machine polish before applying ceramic however it is not mandatory.
How would you know if the coating is truly gone 100% after polishing?
when you spray it with water it doesnt have the effect anymore
Any suggestions on what to use to remove a new botched coating of Cerakote on plastic headlights?
Hey! Machine polishing with compound is the most effective method of removing coatings.
@@ChemicalGuys Including windshield / rear glass too ?
@@ranger99133 I wanna know too
@@shalanigrant1754 I tried it last week using the Chemical guys P4 compound. I only had an electric drill, so I used foam pad attachments and it worked ! You may have to do it a couple times, but it removed the rainbow streaking, and removed high spots / visible spots. I no longer have annoying streak marks visible from inside the car anymore.
hey guys, if we leave a bad streaky ceramic coating on the car would it go away over time?
Yea it should like any coating
Great video guys!
Glad you enjoyed the video!
How long does the ceramic have to stay in the paint for?
Hey! Allow about thirty seconds to one minute before wiping away excess.
Do you have to apply a sealant (Jet Seal) or wax (Butter wax ) after ceramic coating?
Hi Steve! Ceramic can be used as a standalone barrier of protection or layered with your favorite glaze, sealant and wax for added gloss and durability.
Will p4 work to remove clear coat hazing from accidentally sanding an area?
Absolutely!
When using P4 or V38 is that does those polishes remove clear coat?
Hi Jason! P4 contains a very fine abrasive that refines the clear coat. V38 contains no abrasives but is great for jeweling the finish as a final polish.
@@ChemicalGuys So what equivalent is P4 compared to other V products?
Ngl that toon kinda slaps 😂
😄
I need help guys responses would be great I ceramic coated my truck it turned out awesome it didn’t have any streaks until a few days later I looked at the roof and saw a small circle of ceramic on the roof it’s a bit on the edge I didn’t wipe away so does it become permanent the longer I leave it in or can I compound and polish it later if possible
Hey! The ceramic will bond and harden 12 to 24 hours after application. Using a compound will remove it and then the ceramic can be reapplied.
@@ChemicalGuyswhat if I left my coating for a month and I barely noticed high spots on the side doors, can I still be able to remove them with a regular compound? Or do I need a more aggressive compound?
Before I applied the coating I did a 1 step paint correction with 3D ONE compound. Will that be able to remove the high spots ?
Hai my car was same problem but ceramic cote was done last 15 days back can I do same process still please inform me
Hi there! Yes, this process can be still be used to remove and reapply ceramic.
Good video.
If you wanted apply a second coated of ceramic, how long do you have to wait in between applications?
Hey! Allow at least 30 minutes in between coats.
I had a pretty poor effort from a dealer when I collected my M6 and it was polished and ceramic coated. I need to remove the ceramic then correct the poor polishing attempt they did. Should I wash, clay, then polish removing the ceramic? Thank you in advance.
Hey Chris! Thanks for tuning in. Yes, it would be best to wash, clay and polish the vehicle to remove the coating.
If you can afford an M6 you clearly aren’t financially strained, and you don’t seem to have a strong understanding of what you’re getting into. Personally I would suggest hiring a professional detailer to handle it, and then send the BMW dealership the bill.
Hi how do you remove ceramic coating from windshield
Hi Jesus! Machine polishing is the most effective method of removing ceramic.
What about fine steel wool with soapy water or isopropyl alcohol wipes . Or it's possible to add new ceramic over existing
I used a ceramic coating but it became sticky once I wiped whys that?
you left it on to long....
Did video just save my job!
Happy detailing!
I just bought the above product, will I have the problem on black car?
And this is why you do panel by panel
Great feedback!
what if its a day old
Hey! Once the ceramic has cured, this is the most effective method of removing mistakes.
I had someone donthis to my new 2023 suburban they did a horrible job i have this ugly looking glaze in different spots all over my suburban. Now thinking i have to pay someone to at least make it look better
Thank god. I have to redo my car.
Happy detailing!
What do you do if the botched ceramic coating job is 3 years old?
Hey! Machine polishing will be necessary to remove the coating and then reapply a fresh coat.
This is what happens when you go to the cheaper guys looking for low price ceramic coating application process. That’s what that person gets for going to a hack next time when you met a real detailer and he tells you 1k for the job don’t go running off like a broke boy lol it pays the cost to be the boss
😆
Ah so if charge 10k to do it must mean I'm the best! Never done it before but my price means I'm good right?
4
Happy detailing!!
Music's tolerable, but it's too fking loud.
Thanks so much for your feedback!
13th 😈
Happy detailing!!
third
Hope you enjoyed the video!
1st
Happy detailing!!
1
Thanks for watching!
Second
Thanks so much for tuning in!