Key Publishing/Hornby Magazine have a zero tolerance policy for bullying and harassment. As such any and all negative comments about our members of staff, or featured guests, will be removed/blocked.
It's next18 socket not 6pin. I've fitted a zimo ms590, 8x12 speaker fixed to roof and a nano stayalive with 600mf. Sounds by Sven at Tramfabriek and very nice it is too! Had to sacrifice the interior for the stayalive and remove some of the inner dividing bulkhead - worth it imo for optimum running performance.
Cracking little loco, very akin to those used on secret - munitions - WD & MOD railways. Looks like a fun room to be in too, all those layouts - heaven ✌️😊💜👍
Fantastic engine; it can be sound-fitted with a stay-alive too (it is a tight squeeze and you do lose the interior detail). But running it with DCC sound and stay-alive is simply fantastic.
Shouldn't be an issue, just watch any clearance/gauging height differences (platforms, bridges etc). Sleeper spacing etc won't be correct though, but Rule No.1 applies. Good luck👍💜😊✌️
Hi I've been up to our model railway shop and looking at the rail there both Peco but as you say the sleepers on the rails differ, the sleepers on the Narrow gauge are wider and the others are closer, I'm learning as I run OO so this is a challenge, thanks John
Key Publishing/Hornby Magazine have a zero tolerance policy for bullying and harassment. As such any and all negative comments about our members of staff, or featured guests, will be removed/blocked.
It's next18 socket not 6pin. I've fitted a zimo ms590, 8x12 speaker fixed to roof and a nano stayalive with 600mf. Sounds by Sven at Tramfabriek and very nice it is too! Had to sacrifice the interior for the stayalive and remove some of the inner dividing bulkhead - worth it imo for optimum running performance.
Cracking little loco, very akin to those used on secret - munitions - WD & MOD railways. Looks like a fun room to be in too, all those layouts - heaven ✌️😊💜👍
Fantastic engine; it can be sound-fitted with a stay-alive too (it is a tight squeeze and you do lose the interior detail). But running it with DCC sound and stay-alive is simply fantastic.
Would these run on N gauge track? I've got a small N gauge layout and this would be great on the railway, thanks John
009 has the same width track as N gauge, so yes they should run on N gauge track, just the sleeper spacing's would be wrong for reality.
Hi John. Yes this could run on N gauge track as OO9 scale uses 9mm track spacing (same as N gauge)
Shouldn't be an issue, just watch any clearance/gauging height differences (platforms, bridges etc). Sleeper spacing etc won't be correct though, but Rule No.1 applies. Good luck👍💜😊✌️
Hi I've been up to our model railway shop and looking at the rail there both Peco but as you say the sleepers on the rails differ, the sleepers on the Narrow gauge are wider and the others are closer, I'm learning as I run OO so this is a challenge, thanks John
Are they doing a BALA LAKE Rly version of 'BOB DAVIES'?
How long before we get them?