Unibody vs Body On Frame - Which Is Best?

Поделиться
HTML-код
  • Опубликовано: 1 янв 2025

Комментарии • 404

  • @ravengenesis
    @ravengenesis 9 лет назад +452

    Why can't university professors have this level of detail and clarity in their lectures? To stare at a white board for a youtube video and not lose interest is freaking awesome stuff

    • @slyztercoreveanged3175
      @slyztercoreveanged3175 5 лет назад +25

      one thing is...you watching this video means you interest in this topic and you search of this video means that you actually want to learn what it is...meanwhile during university most of the student actually doesnt really care about studying..and they doesnt really interest to learn those stuff their professor teaching..but i cant deny some professors really has bad teaching methods..but most of the time its student fault...just tell me when you going to university just how many that actually really care to study? maybe less than 10% in the class...the other 90% they just wandering around in their head what to do next or what to go on date or whatever

    • @emrage
      @emrage 4 года назад +16

      @@slyztercoreveanged3175 Disagree completely. You have no idea what you're talking about.. There were some modules during my engineering studies which were boring a/f due to the way it was taught with no real world relevance or examples shown in class or practical experiments to put theories to the test.
      Now, 10 years after graduating, I'm revisiting all those modules one by one on youtube and I'm super interested and absolutely annoyed at the fact that most of the tutors/profs I was taught by had absolutely no business being there.
      I hope to god these yt videos have resulted teachers upping their game..

    • @kinghados
      @kinghados 4 года назад +1

      because they want u to fail

    • @chimbatete
      @chimbatete 4 года назад +6

      Professors are Professors because they can't cut it in real life. They are part of the bloated, entitled, overpaid money making bureaucracy known as universities.

    • @fresh2182
      @fresh2182 3 года назад +2

      @@emrage 10 years ago there weren't nearly as many "self taught" intellectuals, so the people who were qualified to teach a subject were very serious people simply due to the nature of the pursuit of knowledge years ago. 10 years ago, if someone was 40 years old, that means they were born in the early 70s, so they lived for about 30 years before the internet really took hold, and they had go get all of their knowledge from very serious sources, and so likewise they taught in a very serious way.
      Now that knowledge is freely available to anyone and everyone, we have lots of charismatics like EE who can break subjects down into everyman's terms, because there is demand for that.
      But make no mistake, if it weren't for people like your "boring" university professors, EE wouldn't have a platform in the first place, because as far as I understand, he hasn't founded any new schools of thought or shed light onto some new area of the physical properties of the universe, he simply repackages the work of more "boring" people as entertainment.
      Further, you received a college education in engineering, one course at a time.
      I doubt you could find one RUclipsr that has released a string of videos that could replace a semester of college, in a similar amount of time

  • @joeschigel87
    @joeschigel87 8 лет назад +402

    The benefit to body on frame over Unibody off road is that the body doesn't flex. Lots of people off road unibody xj's and they eventually wind up with doors and hatches that can't open or close because the unibody has distorted from the off road abuse. Whereas a body in frame vehicle usually doesn't have this issue.

    • @MultiPurposeReviewer
      @MultiPurposeReviewer 8 лет назад +56

      +Joe Schigel This one comment answers my confusion about why vehicular aficionados demand that their big trucks (Explorer, pickups, etc) be body on frame if they go off-road. I never could figure out why BOF was so much better, but this makes perfect sense. Thanks.

    • @bahamatodd
      @bahamatodd 8 лет назад +43

      +Joe Schigel That's comparing much older technology. As explained in the video, a modern unibody is far more resistant to flexing than body on frame.

    • @RagingAura
      @RagingAura 8 лет назад +3

      Yeah I was wondering about this very topic as well!

    • @bahamatodd
      @bahamatodd 8 лет назад +26

      FYI, the only benefits now for body on frame are the ability to customize the body (ie cab configurations, bed, flat bed, box), and its cheaper to manufacture. Companies don't want you to know that though so they can continue making huge profit margins - currently averaging about $10k per truck.

    • @bahamatodd
      @bahamatodd 8 лет назад +11

      ***** Me hate GM? lol. I'm more of a fan boy than anything. That doesn't mean I can't point out that people buy vehicles for the wrong reasons.
      Its estimated that 90% of Ford's GLOBAL PROFITS come from F-series sales in the US alone. Ford makes $13,000 in profit with every F-150 they sell.

  • @avsrule247
    @avsrule247 9 лет назад +121

    I don't usually leave a comment so I just wanted to say that I love your entire catalog of videos. They are always very informative and to the point. No wasting time with intros or outros, I know that if I watch a 5 min video from you that I'm going to get 5 minutes worth of information.
    Keep up the great work!

  • @ootdega
    @ootdega 9 лет назад +122

    If a unibody vehicle gets into a terminal collision, the majority of the body becomes scrap metal. With body-on-frame, most of the body can be salvaged and used for repairs. Other advantages are the ability to remove and replace panels, whether for modification or repair, and lower end-consumer costs in the long-term.

    • @avneeshnathan4978
      @avneeshnathan4978 4 года назад +1

      wow thats informative...thanks man:)

    • @angrysocialjusticewarrior
      @angrysocialjusticewarrior 4 года назад +28

      Car's job is not to be the best at surviving a terminal collision. A car's job is to make the *OCCUPANTS* inside of the car survive a terminal collision.
      So a unibody is way superior than body on frame in this regard.

    • @ootdega
      @ootdega 4 года назад +11

      @@angrysocialjusticewarrior In actual crash tests, the difference is negligible. A body-on-frame design from the 80s is pretty comparable to contemporary unibody in terms of safety. But the car won't crumple like tin foil if you bump into something.
      I could literally make origami out of the "fenders" on my Nissan. The only reason they exist is to make the car less ugly. Meanwhile the same type of collision that caused me to replace half the front end on that was repaired with dish soap on the Panther body.
      As far as I'm concerned, it's an excuse to increase profit and force repairs by making your car out of tin foil and plastic.

    • @nl2935
      @nl2935 4 года назад +4

      @@angrysocialjusticewarrior no this is actually a scam by car manufacturers. they just want you to buy new cars

    • @sunzoo7173
      @sunzoo7173 4 года назад

      THanks man

  • @davidfarmer
    @davidfarmer 9 лет назад +47

    nice video, as an avid "offroader" id like to point out a few advantages that a framed vehicle has.
    1: you really cannot have too much articulation when tackling obstacles, frame flex can give you the little bit of extra flex you need.
    2: a unibody will flex as well, and when it happens it will flex things like the doors and panels that have glass in them and it will damage the body instead of just the frame.
    3: its a lot easier to attach bumpers rock sliders and roll cages to a solid steel frame.

    • @johnsarab4500
      @johnsarab4500 2 года назад +1

      Yup, frame flex is not a bad thing if designed for (like the gap between cab and bed on a tradition pickup).

    • @davidcosine
      @davidcosine Год назад

      Great comment... I'm in the market for a vehicle but don't need to off road it.. do need space and occasional all wheel drive. I'll get a Bronco when I'm rich and a Bronco sport for now. If I have extra money I'll get a dirt bike

    • @Stevexupen
      @Stevexupen Месяц назад

      in lots of cases when flex on unibody does happens probably you'll not be able to close the doors.

  • @EngineeringExplained
    @EngineeringExplained  9 лет назад +27

    Engineering Explained Secrets - Revealed: This was filmed the same day as the suspension spring video, hence the involuntary popped collar. The little frat bro on my shoulder wouldn't let it fold down. I'm as embarrassed as you are. ruclips.net/video/hGZRairqHNI/видео.html

    • @SkeptikMC
      @SkeptikMC 9 лет назад

      +Engineering Explained Would you be able to do a video on the requirements for turning a late-model car/sedan into an off-road vehicle? Discussions on chassis-swap vs. suspension upgrade vs. custom chassis fabrication etc. As an example - I have a 2007 Charger R/T that will be undergoing a chassis swap with a truck shortly. Think, modern (streetable) version of the FastFurious7 off-road charger.

    • @rajtarn
      @rajtarn 9 лет назад

      Love your content. Keep it going. :)

    • @balajichandrasekaran6312
      @balajichandrasekaran6312 9 лет назад +2

      +Engineering Explained why do you never deal with bikes..at all in ur videos Harley's or KTM's... and stuff ?

    • @Nonamenever557
      @Nonamenever557 9 лет назад +1

      +Engineering Explained Body on frame is better than unibody for towing in the long run, as the stresses run through the frame rather than the body, no matter how strong you make a unibody, its still got that fundamental design issue. Also for off-roading, it is an advantage to have a frame, as it can flex like you said, but not primarily for articulation, but rather to bend so that the body doesnt have to. Try opening the door on a unibody when its on an axle twister, quite often some doors wont be able to open even on brand new cars. Its better in the long run. Maybe you can prove me wrong! :)

    • @vacomments
      @vacomments 9 лет назад

      +Engineering Explained I wonder where and if they differ in regards to safety. Everything being equal, my mind tells me that unibody is supposed to be safer, but i would welcome the views of other people.

  • @KevinsChili
    @KevinsChili 9 лет назад +143

    Drawings 10/10 - would watch again! As always, great video!! :)

    • @EngineeringExplained
      @EngineeringExplained  9 лет назад +49

      +MrandMrsHayday Means a lot, spent days perfecting the truck bed.

    • @gogocro1
      @gogocro1 9 лет назад +1

      +Engineering Explained Great video and explanation as always, keep it going. The drawing is good too, but you can improve it even more. Remeber to keep lines parallel - front to back, left to right, window to window etc. It makes for a perfect drawing. The unibody drawing is perfect though!

  • @championrd8557
    @championrd8557 2 месяца назад +1

    This is first time watching Engineering Explained 10/12/24

  • @PENDANTturnips
    @PENDANTturnips 9 лет назад +8

    Have you ever done a video on what to look for when buying a car? I love to understand how the insides of cars work but a high level explanation going over the things to consider when buying a car would be awesome.

  • @kobbetop
    @kobbetop 9 лет назад +32

    Body on frame is cost effective, for example 1991-96 Caprice body was sitting on a frame from 1977...The new BMW i3 is body on frame...in a totally modern way but the idea is still the same.

    • @FM4AMGV
      @FM4AMGV 9 лет назад +6

      +Kobbetop with the body on frame, they could house the weight of the battery, use an extremely lightweight body and maintain a low weight, and have an isolated driving experience.

    • @FM4AMGV
      @FM4AMGV 8 лет назад +1

      ChinnuWoW vics were out of production in 2011

    • @FM4AMGV
      @FM4AMGV 8 лет назад +1

      ChinnuWoW just saying because all the full frame sedans except the i3

    • @fraupitzler9385
      @fraupitzler9385 6 лет назад

      And body on frame is easier to restore !

    • @lucianistoc1264
      @lucianistoc1264 3 года назад +1

      The i3 is undoubtedly a monocoque

  • @Don22Escobar
    @Don22Escobar 7 лет назад +4

    i got a trd pro 4runner body on frame. pretty accurate. quiet ride very smooth but has very extensive offroad capabilities. great video.

  • @jakerubcich4211
    @jakerubcich4211 6 лет назад +2

    Thanks Jason. I honestly don't know where else I'd find well organized informational videos that get so much across in such a short amount of time.

  • @samirsharma6312
    @samirsharma6312 3 года назад +1

    Just the video I needed to see before choosing a car/SUV. Remarkable clarity.

  • @RohanSanjith
    @RohanSanjith 10 месяцев назад +2

    Detailed explanation!! I couldn't choose any one, cause both have their disadvantages and advantages.

  • @willbergger812
    @willbergger812 9 лет назад +9

    The isolation with body on frame is useful with heavy duty towing, hauling, or serious off-roading situations. Any situation that could cause a lot of flexion in the vehicle will create problems with unibody vehicles. Windows crack, body panels warp, and doors won't open/close when too much flexion is put on a unibody design. Of course this is only applicable in serious situations.

  • @musclecarfan74
    @musclecarfan74 2 года назад +1

    Pull a 70 Chenille sitting for decades out of field vs a Camaro and see which once is the better restoration candidate. Most vintage unibody cars from the muscle car era that have been neglected are usually in pretty bad shape.

  • @mohsenabbasi8878
    @mohsenabbasi8878 2 года назад +1

    This guys knowledge, skill and presentation --> CLUTCH! Droppin gems on this video

  • @Zephry2
    @Zephry2 9 лет назад +40

    I made it halfway through the video before I realized his collar was sitting up the whole time lol

    • @jrdroptini
      @jrdroptini 4 года назад +6

      I didn't notice it until I read your comment.

    • @niickivan
      @niickivan 3 года назад

      @@jrdroptini Same here

  • @R777-RLM
    @R777-RLM 9 лет назад +1

    The advantage of a body on frame design for trucks and large SUV's, is of course for towing and a higher payload for trucks, because the stresses are not applied to the body, only the frame. Also for 4x4's, a frame gives strong mounting points for the suspension, especially on the front, where all real body on frame trucks and SUV's with independent suspension, have the upper control arm attached to the frame as well. Unibodies that have an upper control arm, have it attached to the thinner metal of the unibody. Most unibody 4x4's, as well as the Honda Ridgeline have a less durable MacPherson strut, instead of an upper control arm that is attached directly to the unibody.

  • @Phoenixx29x
    @Phoenixx29x 2 года назад +1

    Thank you for this! I'm reading about the differences in a book but the illustrations are so unclear. 5 seconds into your video and I immediately saw the difference.

  • @clydemurphy2392
    @clydemurphy2392 3 года назад

    This video answered a lot of questions for me. In the past, I needed a large pickup truck capable of going off road. Now, I'm retiring and downsizing, and won't even be driving on an unpaved surface. I still; however, would like to be able to carry in my vehicle more than just a few bags of groceries. A new small truck will be out soon that checks off a lot of boxes for me on a unibody frame. This video helped with my decision. Thank you for this informative presentation.

  • @Orcinus1967
    @Orcinus1967 5 лет назад

    So concise. I love your diagrams and descriptions. You obviously prepare. Others obviously do not. Kudos.

  • @dino339
    @dino339 5 лет назад +2

    another disadvantage of unibody is that if they want to make the frame more rigid for offroading, they will make the frame pillars much more thick, the new models range rover vogue have really big pillars that you won't notice from outside.. as a result the windows are small and obscure visibility also that pillar will take more space inside the car..

  • @johnsarab4500
    @johnsarab4500 2 года назад

    Note that all trucks from 18 wheelers to mini-pickups have body on frame - strenght. Also a body on frame is repairable by any weekend mechanic.

  • @smickster
    @smickster 5 месяцев назад

    Thumbs up for that cool 3D rendering of the unibody.

  • @raftika1
    @raftika1 2 года назад +1

    In the event of a collision which one is safer to be in?

  • @redrider11rc
    @redrider11rc 9 лет назад +1

    people generally like body on frame better for off-road because they usually have less frame flex or it can be easily taken out and it also also for more suspension mounting points. for example if you were to install a long arm kit you would be able to easily put new mounts on a frame rather than a unibody.

  • @VIVALDITYAWAN
    @VIVALDITYAWAN 6 лет назад +1

    Body on frame mpv, is surely durable. Like my toyota Innova, really tough for a super rough daily route from home - office - home. I agree of what you said, "Depends of how you engineer it".

  • @douglascrawford4492
    @douglascrawford4492 5 лет назад

    One thing I find is that getting a jack under a body on frame is just way easier so it allows a garage repair that is safer in that I have nice easy sturdy places to place jack stands and jacks. This lowers repair cost by DIYs.

  • @MudholHound
    @MudholHound 7 лет назад

    This changed my whole plan and belief of unibody frames wow amazing video

  • @Ayman.Al.Balushi
    @Ayman.Al.Balushi 4 года назад +4

    First time I am learning about their difference thank you! One nooby question.. doesnt the lower centre of gravity due to weight being at the bottom of the body on frame mean its less likely to flip when off roading?

  • @pizzasmithdude
    @pizzasmithdude 2 года назад

    The 4runner is a perfect example of why BOF is just a better design for longevity, as well as expense to repair. We had a trailer tire fly off the highway and hit a Mazda CX-9 between the B and C pillar, because of that a 40k dollar car will likely be unrepairable because not only did you lose the roof and the door but now the entire vehicle is structurally unsound aside from the subframes and suspension. BOF can have a body swap and potentially avoid a catastrophe like that.

  • @devintheawesome2344
    @devintheawesome2344 9 лет назад +5

    the biggest advantages to off roading is the duality of a body on frame. typical after lots of rock crawling unibodys twist and the doors wont shut. also the ability to add a "body lift" basically put taller spacers between the chassis and body to allow more tire clearance

  • @kevinwong6588
    @kevinwong6588 3 месяца назад

    The last Chrysler Imperials (1964-1966) before the move to unit construction were such tough motherfuckers, still banned from demolition derbies to this day.

  • @TheAutoChong
    @TheAutoChong 9 лет назад +1

    This guy is a Genius! You Definitely know your stuff

  • @Stevexupen
    @Stevexupen Месяц назад

    the offroad advantage is not really due to the frame's flex quality or lack thereof, but rather due to the ground clearance that ladder frame have.

  • @FM4AMGV
    @FM4AMGV 9 лет назад

    I've noticed in pretty much every car I ride in that's not a truck or my vic, that I hear the tires and feel grooved roads a lot more.

  • @dennisjump8655
    @dennisjump8655 6 лет назад +1

    I'm restoring a unibody car and if I ever do it again it will be a frame car. Bizarre shapes and everything is connected. so it makes it a HUGE pain to replace and repair.

  • @427060
    @427060 9 лет назад +1

    I'm still giving the win for off-road use to body-on-frame vehicles. If you're building a 4x4, the body can be drastically altered to accommodate larger tires/more suspension travel without affecting structural integrity of the vehicle itself. In addition, because the frame is easy to access and rigid, you have much more freedom in mounting new suspension components, whereas you're limited to the factory hard points with a unibody.

  • @BenjamanWoolner
    @BenjamanWoolner 9 лет назад +2

    Where do car's like the classic VW Beetle fit in, they have a body that separates from the chassis, but it is not a frame. It's transmission tunnel provides the strength of the car, made more rigid by the sills/heater channels when the body is attached.
    This design seems to fall between the unibody and body on frame designs and is light weight too

    • @Rawkabilly57
      @Rawkabilly57 5 лет назад

      Was a video ever made about this? I love air cooled vws and was just think about their "unibody"

  • @JuanGarcia-fv9ph
    @JuanGarcia-fv9ph 4 года назад +8

    Im a simple man, I see body-on-frame, I think Panther Body👀

  • @TheDarkFJ
    @TheDarkFJ 3 месяца назад

    Great video. The body-on frame is an old concept. The ideal offroad car would have a bulky unibody.

  • @leej8394
    @leej8394 9 лет назад

    Another great demonstration, love all your videos ,you brake it down on a level that is understood

  • @SkotiM
    @SkotiM 6 месяцев назад

    Great video, well presented.

  • @engrirfan2140
    @engrirfan2140 3 года назад

    Your channel name should be 'engineering well explained'!!!!Respect

  • @kcwalkman
    @kcwalkman 9 лет назад

    An altogether great video because as always you're presentation of the material is dead on target. Thank you.

  • @tooljockey2777
    @tooljockey2777 7 лет назад

    any question i have your channel always does a fantastic job of answering. Good work.

  • @DomPatek
    @DomPatek 2 года назад

    A couple of days ago I drove over a significant transverse "bump" on the road (more like a slightly smoother speed hump) at about 40mph. As far as I remember, the suspension didn't bottom out and I didn't hit anything with the frame, but I'm still concerned about the body flexing under the stress. We're talking about a unibody hatchback here (new Mazda3). Is my fear justified or is my OCD getting the better of me?

  • @jdmjimmy
    @jdmjimmy 6 лет назад +5

    Love the Dakota and crown vic

  • @cambaker8134
    @cambaker8134 9 лет назад

    I think what they mean when they say body on frame or cab chassis as its called in Australia being better off-road is that the vehicles will generally be built with a suspension layout that is a lot more capable in an off-road environment such as solid axle type suspension where as a monobody or monocoque set up will normally have independent suspension which is hopeless in comparison

  • @staresce
    @staresce 4 года назад +1

    What about the criticims of unibody that they are harder to repair if there is rust damage and they dont last as long ? And if you want to lower a body on frame vehicle does that make it less likely to roll over in a crash with a new lower center of gravity, ,and can it be done in a way that does not harm it's towing and off road abilities ?

  • @A.K.Kopperud
    @A.K.Kopperud Месяц назад

    Very helpful. Thanks for this thoughtful video. 😊

  • @32353235e
    @32353235e 7 лет назад

    one major omission: aspect ratios of more than 2:1 are possible with body on frame with lesser weight penalty than unibody

  • @akeemlawrence9750
    @akeemlawrence9750 7 лет назад

    Thoroughly detailed and explained as usual.

  • @JohanEinevik
    @JohanEinevik 5 лет назад

    Awesome! Used this to explain unibody in Tesla Cybertruck discussions!

  • @muhammadhaziq7849
    @muhammadhaziq7849 9 лет назад +4

    You have already 300,000 subscribers? Didn't notice that. Well keep up the good work and drawings! :)

  • @FGuilt
    @FGuilt 9 лет назад

    Good vid. answered some of my questions. I used to hate unibody (rust can destroy the vehicle since the unibody provides structural integrity whereas rust on the frame can be repaired much easier). Had to junk a car just because of rust on the floor pan...not happy. I don't necessarily hate unibody anymore but, still, I don't like having to buy cars because of BS like floor pan rust.

  • @TheREALJosephTurner
    @TheREALJosephTurner 3 года назад

    Not sure if you check comments in older videos like this, but what would you call the system VW used on their air-cooled cars? It's not a unibody, but it's also not a body-in-frame. A body-on floorpan, perhaps?

  • @RalliartGT1
    @RalliartGT1 9 лет назад

    ahhh I've been waiting on this topic for a while. Great Vid as always!

  • @santosjr2840
    @santosjr2840 2 года назад

    Beautifully explained.

  • @Wtrxprs007able
    @Wtrxprs007able 9 лет назад +37

    Proud body on frame owner. Toyota Landcruiser toughness

    • @BaNZFall
      @BaNZFall 6 лет назад +2

      Indeed. Toyota Crown owner.

    • @dudleydooright
      @dudleydooright 6 лет назад

      Yeah buddy.. SportTrac.

  • @marcbjorg4823
    @marcbjorg4823 2 года назад

    Body on frame is less expensive to make, you can improve the body or the frame independently.

  • @ilijazivanovic3698
    @ilijazivanovic3698 4 года назад +2

    Body on frame is better for convertibles beacuse you don't need to reinforce the body.

  • @ajeshvariyam1651
    @ajeshvariyam1651 2 года назад

    it sounds absurd but is there any way to identify whether its a monocoque or body on frame just by looking at the vehicle ?

  • @carplay5454
    @carplay5454 9 лет назад +34

    2:58 you were a t-rex

  • @StratophonicDubstep
    @StratophonicDubstep 9 лет назад

    Dude your drawing skills are on point

  • @amitoshpandey
    @amitoshpandey 3 года назад +1

    I LOVE Ur EXPLANATIONS ,FROM INDIA

  • @yawnwarrior
    @yawnwarrior 3 года назад

    What about safety during a bad collision? Will the un crumble and absorb more force (making it safer) than a body on frame (which is so good at being sturdy that it will transfer the impact of the collision to the vehicle occupants)?

    • @ar12.
      @ar12. 3 года назад

      It really depends on the car some modern body on frames utilise some crumple zones thru use of welds that are designed to break away on a impact but unfortunately a unibody will perform generally better In a crash as the car is basically a roll cage but the force won’t be transferred thru to occupants normally to the other end of the frame but a lot of advances in body on frame has been made in 20 years it really depends one thing to note is how unibody by design will divert the impact around you.

  • @k0walsk
    @k0walsk 2 года назад

    Great! Would love an explanation on how unibodies are actually made. Stamped panels bolted together?

  • @timsteinkamp2245
    @timsteinkamp2245 4 года назад

    That is the first time I've seen a pickup with the cab connected to the rear box. Don't pickups have the front bumper connected to the frame and the rear connected to the box with the tow bar connected to the frame?

  • @sirxavior1583
    @sirxavior1583 7 лет назад +2

    What if you got in an accident with a Unibody Vehicle, even if your not at fault? Your screwed. The entire structure has been compromised and the car instantly becomes a right off.

  • @veerbhadra9139
    @veerbhadra9139 8 лет назад

    where do you get all the materials for study as I was unable to find that easly & ur explanation are good too...

  • @pootisspangle6636
    @pootisspangle6636 3 года назад +1

    What if we haf unibodies and body-on-frames in one vehicle?

  • @kayrealist9793
    @kayrealist9793 3 года назад

    Why are the longest lasting cars all body on frame?

  • @jacobtunnison727
    @jacobtunnison727 6 лет назад

    No you did a great job with the drawing and the explanation

  • @santoshsookgrim2786
    @santoshsookgrim2786 9 лет назад

    hi Jason, I think you may also include that its popular with Hot Rodders since you can pull a desired body off a standard chassis and drop it onto a specially built racing chassis. This could be useful for a car with a rusty chassis i.e. can be easily swapped thus saving the body - environmentally friendly ;) Also, the modular design of the frame and body allows the car to essentially be built parallel in 2 sections hence the body can be painted, interior and wiring fitted whilst the suspension and drivetrain are being installed onto the frame - the 2 sections ultimately being married at the end of the line thus speeding up production. I know this method is now used during the assembly of modern unibody/monocoque cars now but I believe it started with the body-on-frame cars. thanks for the video! +Engineering Explained

  • @sergiomendez1962
    @sergiomendez1962 9 лет назад

    In towing and heavy cargo u need 2 have flex or the frame wilk snap, thats why unibody r not used for heavy duty use, it is 2 stiff for that and will breack, if u see a 18 wheeler when it takes of hard u will see it flex, this helps distribute the load and desipate the impact, hope i could help, it is just another benifit so people could untherstand why it is used pick ups and truck, sorry about my english it is not my first language.

  • @Adddicts
    @Adddicts 6 лет назад

    Which one is safer in a accident

  • @Wormed101
    @Wormed101 8 лет назад

    You actually do want some flex in the frame on big trucks when towing a lot of weight.

  • @dattape2828
    @dattape2828 7 лет назад

    what do you think about the crash / safety data of unibody vs BOF? I suspect the conclusions are skewed to make BOF worst because 1) govt wants better mpg vehicles 2) if BOF offers better crash protection, then the "other" crash vehicle with unibody design would have more injuries/fatalities ? what are your thoughts?

  • @kojakbandit4537
    @kojakbandit4537 9 лет назад +18

    Like the body on frame more

  • @altaloma7789
    @altaloma7789 5 лет назад

    You mention durability, but just relate it to off-road performance or towing. There's another consideration; damage from an accident, as mentioned below. The beauty of having a body-on-frame and a very durable frame is that in many cases, a truck can be driven away from an accident, rather than having to be towed. Though the collision testing does not very this, I chose to put my family into a body-on-frame vehicle because they could take a substantial hit and come out just fine. This has been proven out in our case several times. Our old SUV is battered, but it still keeps on going and has always been able to drive away from accidents. Once the crumple zone on a uni-body has crunched, you are pretty much out-of-luck. You will survive, but your car won't.

  • @pkonneker
    @pkonneker 9 лет назад

    Would the attachment of the body to the frame not make them act pretty close to a unibody? Or is the coupling too loose to trasnfer the forces?

  • @chriscycles6845
    @chriscycles6845 9 лет назад

    you are really good at drawing at different points of view of an object. can you make a tutorial on that please?

  • @jab92110
    @jab92110 6 лет назад +5

    THANK YOU!! I really wanted this exact thing. :-*

  • @dudleydooright
    @dudleydooright 6 лет назад

    Towing should be in the advantages section of frame-on. Sure.. you "could" have a unibody built at the same weight that would allow it to be equal, but nobody does that. Frame-on is generally always better for towing.

  • @TheLonePiper
    @TheLonePiper 3 года назад

    Cool. I got to this site looking for to see if I should use stabilizing bars on a unibody frame. I got my answer by pulling together info from a few sites: it depends on the weight. In my case, I will be pulling an 1800 lb trailer and my Model X weighs 5000 lbs, so it is not a good idea as it could bend the frame. Great details. Liked and subscribed!

  • @1silvervespa
    @1silvervespa 2 года назад

    It's hard to save a Unibody vehicle in the Rust Belt.......
    Once you get rust damage it just spreads .
    With a Frame you can do repairs .
    Or replace Body or Frame.
    Yes people save and Restore things.
    Rarely unibody.

  • @JaysonBucy
    @JaysonBucy 5 лет назад

    I know this video is older and I apologize if you've gone over this somewhere else, but can you go over a space frame chassis?

  • @MichaelMisanthropist
    @MichaelMisanthropist 9 лет назад

    Have you done a Space Frame video?

  • @slappsly
    @slappsly 9 лет назад

    Excellent video!

  • @yashasvipratapsingh356
    @yashasvipratapsingh356 3 года назад

    Just awesome brother.

  • @xoom2
    @xoom2 3 года назад

    very good explanation.
    can I ask question. are all sedans cars like Vios on unibody ? how about SUV like Fortuner or Montero is it always body on frame ?

  • @dustypaint
    @dustypaint 5 лет назад

    I had seen people (well, Russians) cut the roof of Lada Nivas(Unibody) and support the aerodynamic with a thick beam mounted, and drive them as cabriolet. I love the design but I'm not sure if I could drive again after a offroad.

  • @aubreydisney4620
    @aubreydisney4620 9 лет назад

    good explanation. are u still doing videos on mods? specifically motor mods vs other motor mods in ur opinions on which would be better. ie, bore vs stroking? or both on a newer motor. say an lsx application?

  • @Tailz90
    @Tailz90 9 лет назад

    I wanna see a scion iA review, i just seen a commercial for it, and i know nothing about it

  • @nandito7021
    @nandito7021 5 лет назад

    the reason why the body on frame idea was first used...its because most manufacturers tought of it on trucks and suv thats the main reason otherwise there was no point for them to put a sedan or coupe body over a separate frame just think of that.

  • @seanbailey8545
    @seanbailey8545 3 года назад

    I prefer a body on frame. Much easier on restoration if you want to repair rust etc.

  • @aicram62
    @aicram62 2 года назад

    I was looking at an F-53 chassis. And I can not understand how a Pace Arrow body can attach since it is so much wider. So I'm thinking a Frame is not the same as a chassis. And that there is a frame that connects to the F-53 chassis that the rest of the RV body connects onto. Is my logic sound?

  • @JSchaefer93
    @JSchaefer93 9 лет назад

    is that part of why full size trucks can cost up to like 50-60K dollars? Cause they cost more to make?