How To Replace Coolant Overflow Surge Tank 2007-2020 Chevy Suburban Tahoe Sierra GM Truck No Spill
HTML-код
- Опубликовано: 9 дек 2020
- Coolant Tank ONE Tube: amzn.to/443Zgyy
Coolant Tank TWO Tubes: amzn.to/3a10LVo
Replace the bottle, NOT the coolant. The fastest, spill-free method to replace the coolant surge tank. Don’t waist good coolant. With this method, there is no need to drain your coolant. No need to spill any coolant. No need to remove a wheel or raise the vehicle for any reason. This applies to Chevy, GMC, Cadillac, Yukon and GM Truck & SUV. 2007-2014 uses slightly different tank than 2015-2020 but this method works very well for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 model years. If this video helped, please give a thumbs up and subscribe for future videos.
To Get the Job Done:
-Coolant Tank with ONE recovery Tube (07-14 Models) (Includes 15PSI Cap): amzn.to/443Zgyy
-Coolant Tank with TWO Tubes: amzn.to/3a10LVo
-Cheaper Coolant Tank with TWO Tubes: amzn.to/3IgDaRm
-Coolant Tank Cap 15PSI AC Delco: amzn.to/37RZwF9
-Coolant Tank Cap 20PSI AC Delco: amzn.to/3gAAONF
-DEX COOL Antifreeze for GM Vehicles 1 gallon 50/50 premix: amzn.to/3n21yc6
-Socket Set with 7mm (for airbox clamp) & 10mm (for tank mounts): amzn.to/3qLrNpG
-Plier Set for Hose Clamps: amzn.to/375BEyP
PROTECTIVE GEAR:
-Face Masks: amzn.to/3D0zCiW
-Safety Goggles: amzn.to/3fZQfNq
-Safety Goggles (2-Pack): amzn.to/2PX2eR5
-Ear Protection Ear Muffs: amzn.to/3QOBMrq
-Ear Plugs: amzn.to/3CZJHfR
-Shop Gloves: amzn.to/3aGzAgV
-Nitrile Gloves (6-mil): amzn.to/3awjyWQ
Other Chevy Truck Repair Videos:
How To Find and Repair A/C Leak Chevy Suburban Tahoe Silverado GM Trucks:
• How To Find and Repair...
Stabilitrak Off Traction Off Dash Warning Solved: • Stabilitrak Off Tracti...
Engine Hot AC Turned Off Warning Solved: • Engine Hot AC Turned O... Fix A
Transfer Case Shaft Leak: • How To Fix Transfer Ca... Fix
Power Window Switches:
Driver master Switch: • Remove & Repair Driver...
Passenger & Rear Switch: • How To Remove and Repa...
Fix broken Visor Mirror: • Broken Visor Mirror Qu...
Rear Window Defrost Repair: • Repair Rear Window Def...
Remove and fix your Chevy Stereo: • How To Remove and Repa...
Remove and Replace your Chevy Bumper: • How to Replace the Fro...
→ Become a ScubaMoto Subscriber - goo.gl/iAwSQc
→ If this video helped, please give a thumbs up and subscribe for future videos
→ As an Amazon Associate I earn from qualifying purchases at no extra cost to you. Win!
→ Business Inquiries email: scubamoto@outlook.com Хобби
Watched the video and went out to the truck. 30 mins later the job was done. Simple clear video and literally no mess !
I'm glad it helped. Good job on the install and thanks for the comment.
Dude..😂 I fast forwarded and started right where you were pouring coolant back in with a windshield wiper jug. I freaked for a second😂😂
Great walk through. No wasted time. Appreciated!
Glad it was helpful. Thanks for the feedback.
Great trick with the washer fluid bottle!! Well done! 😃
I'm glad you liked it. Thanks for the comment and for sharing.👍
Excellent video/tutorial! Thumbs up and subscribed! Thank you!
Awesome! I'm glad it helped. Thanks for the sub.
Thanks so so much buddy. Dealer wanted $379 for parts and labor for this. You saved me big $ and much appreciated!! They were going to charge me $179 just for the new container when i saw it online everywhere for $60-$80.
Glad I could help. Congrats on a good replacement.
Just swapped mine in like 12 mins. Thanks bro
Glad I could help. Congrats on good fast swap.
Knocked it out in 15 minutes, thanks man
You're welcome. I'm glad it helped . Congrats on getting the new tank on and thanks for sharing.
After seeing your video who would want to take it back to the dealership to do the work, to leave there in a wheelchair because you paid a arm and a leg 😆 for something that took long as this video. Very helpful thanks 👍🏾
D W Johnson: Glad I could help. Thanks for the great comment!
@@ScubaMoto Thanks again Sir I replaced my coolant reservoir with no problem, you saved me from taking it to the dealership
My son and I replaced his after watching your video. Thanks for posting.
Glad I could help. Thanks for sharing.
This video helped out big-time. I diagnosed the issue, bought the new part, and finished the replacement in two hours with the guidance here. I have an aftermarket intake, so there wasn't as much room, but it still worked great. Thanks for the clear/concise content.
I'm glad the video helped you out. Thanks for the comment and for sharing.
@@ScubaMoto I also subbed, so I hope that helps the algorithm.
Good video
Thanks !
Just what I needed !
Glad it helped. Thanks for sharing.
That was fantastic. Bravo sir.
Glad it helped. Thanks for the comment.
Thanks for the info was relly helpful 👌👌
Antonio Paredes: I'm glad it helped. Congrats on getting done and thanks for the comment.
Great video! Thank you
Rene Ramirez: You are welcome! I'm glad it helped. Thanks for the comment and for sharing.
THANK GOD thank you sir
Excellent explanations thanks
You're welcome. I'm glad it helped. Thanks for the comment.
Wao!! well done!! 👏👏Thank You
I'm glad you liked it. Thanks for the comment.
Thank you 💙
P F: You’re welcome. I'm glad the video was helpful. Thanks for the comment.
Thank you
Shawn Render: You're welcome. I'm glad the video helped. Thanks for the comment.
Thanks a lot. Will be doing this tomorrow.
Don Cheechee: I'm glad to help. Enjoy the replacement and the ability to finally see the condition and level of the fluid in the container.
Thank you!!!!!!
You're welcome. I'm glad it helped. Thanks for the comment.
Great video. Do you know where the coolant level sensor is on this vehicle?
Scott Bullins: Good question. The good news is the bottles have a place for a sensor but they don't use one on many of the vehicles including the one in the video. That's why they just put level marks on the bottle. That's how you check the level, just look at it. There is a coolant temperature sensor, but it's on the engine (driver's side) and that's another topic.
I just paid my mechanic $484 to do this job. I think it's time to find a new mechanic.
Maybe he changed all you coolant also. It’s very time consuming if he did.
He was wrong for charging u that price
So these don't have a coolant level sensor? Hmmm
Great video!
No, not the one in the video. The tanks all have spots for them though.
I just had a flush done. I noticed after getting home the side to the back is 2/3 full. The side on the front is full. Will they equalize?
Turn on all heaters and let it run for a while and they should eventually equalize.
I bought the replacement and am prepared to do so. I do have a question; what’s the hole at the bottom of the reservoir for?
The bottles are designed with a place for a level sensor but they don't use one on most of the vehicles including the one in the video. Since it doesn't penetrate the tank, there's no need to eliminate it on some bottles. With level marks on the bottle, there's no need for a level sensor. Enjoy the install.
@@ScubaMoto thanks a lot. The install was so easy
I had to loosen the tank to put in a new battery and now it seems to be a little more jiggly than it was before (I think). How much should the tank be moving around? I don't want to cause a rattle or have the hoses wear out prematurely from the motion. Thank you.
Matt Elder: If both the mounting bolt and nut are tight but the tank feels looser than it was, it usually means the hanger on the rear of the tank that goes against the fender-well didn't hook on quite right. That's what I'm doing in the video at 4:45 . It's worth a check. I hope that helps.
@@ScubaMoto Thank you. I did make sure that fell into the slot on the fender-well. I think the biggest problem is that the stupid mounts are plastic and it allows it a lot more freedom than good old metal. Also, having only two mounts diagonal from each other isn't the greatest design. I cussed out a few engineers when I replaced the battery given how much I had to move or remove just to switch out a battery!! Thank you, again.
I did this in 08 Yukon 5.3 vortec my old one when filled would leak a little bit but once full it would stop and hold confused I bought a new one only to discover same exact thing hmm odd maybe that’s how they breath but it’s in the bottom corner somewhere does anybody notice this or just me ? Again once filled the don’t leak it’s very weird . Normal?
It's super common for replacement tanks to leak due to the casting error that I show in the video 2:13 . That's why I highly recommend smoothing that lower hose tube so it gets a better seal on the lower hose. When the lower hose tube leaks, it runs down under coolant tank and is often mistaken for a tank leak.
I'm having coolant come out from the bottom was told a sensor went there but I didn't see you put nothing ?
Tony Ramirez: The vehicle in the video does not use a coolant sensor at the bottle. The only coolant sensor it has is for temperature and it screws on the driver's side of the engine. The bottles have a place for a sensor but it would not likely be the site of a leak. These bottles usually leak at the seams or where the hoses attach.
@@ScubaMoto I'm having coolant come out from underneath what does that mean it aint cracked do I have air in the holes ?? Not overheating just seem to squirt out from the overflow tank underneath when I step on it cap is new and so is coolant reservoir
Tony Ramirez: I'm pretty sure it's the lower hose leaking where it attaches. It's common with new bottles. That's why in the video at 2:12 I show that most new bottles have bad casting flaws where the bottom hose attaches and have to be scraped or sanded smooth. It is likely yours is also leaking due to casting flaws and is leaking and leaving fluid on the bottom of the bottle. With fluid everywhere it might be hard to confirm but if you dry everything off completely, you will likely find fluid first showing up on the bottom of the bottom hose. If so, then you need to smooth the lower hose nipple as shown in the video at 2:22 and then re-seal it with a good clamp. I hope that helps.
Well unfortunately for mine the tank split on the bottom so I guess I don’t have to worry about losing antifreeze 😂
I guess the bright side is you're basically getting a flush out of this. Good luck with it and thanks for the comment.
Chevy dealer wants to charge 900 dollars to do this