I had this error code, so watching your video I used the hair dryer set on high for 1 minute, followed your instructions and for whatever reason caused it to error, your method worked. Your video allowed me to do this FIX start to finish in 5 minutes total. Now I'm washing again. Thanks
For me it was a very big problem removing the dryer that was on top of the washing machine, so I tried to warming up with a heater gun on front the unit. Whit care around the metal and plastic control front for some minutes. When reset the power the error 90 disappeared. Is incredible. Thanks very much for your video 👍
Used the blow dryer to do a load of laundry again today , thanks for advice . I read all comments and wonder why the Frigidaire company has not recalled this machine and fixed the problem? Will never buy from them again . And judging by the amount of views on your hairdryer video a lot of people will not buy from them again!
Ditto here. Plug/unplug cleared it the first time. Holding Reset, 2 times after that. Nothing would clear it after that. Checked all the contacts, inspected the board, etc. Finally tried your hair dryer trick and - bam - it came to life. New board is on the way. But in the meantime, we'll be washing our clothes with a hair dryer. Thx man!
I hade the same E90 error code. You have the"better model" and I have the "good model", but this totally worked! I hope it continues to work without the hairdryer! Thanks for posting!
Yup! This really worked for me. Thanks Bill! I drained the drain pump n had to reattach the drain pump. During that process some left over fabric softener spilled near the circuits. Used the hair dryer , dried it out n Wallah back in Business. Liked n subbed👍🏾🤟🏾
Oh MY GOODNESS... I TRIED THIS AND IT REALLY WORKED. I JUST HAD TO LET THE DRYER SIT ALMIST 5 MINUTES ... SAVED ME A 85$ SERVICE CALL AND NO TELLN HOW MUCH FOR REPAIRS . THANK YOU SO MUCH !!!
OMG, THANK YOU!!! I just went to start a load of clothes around 8 pm and got this message. The buttons nor the 15 minute unplug worked for me but this video saved my life. I imagined having to go the laundry mat the first week of work after summer vacation (I'm a teacher) and bout had a heart attack. Lol. Thanks so much for sharing!
It worked! Can't believe it - thanks you so much for taking the time to post this. I kept it unplugged whilst using the hair dryer for about a minute then plugged in and it worked! Nice one
be careful not to heat to long and melt the front panel inside. It worked for me for about two months then nothing, I had to buy a new control board $120 on amazon.
I had the same error (E90 on the same model) and the Hair Dryer trick worked for me. However, the problem was coming back over and over. Obviously, this "patch" wasn't permanent, so I put two switches on the washing machine. The first one is to turn on/off electricity (to avoid disturbing sound of the beeps). The second one is to turn on/off a Christmas light that heats the control board. When the E90 error appears, I turn on the light for 1-2 minutes, then turn it off. When I turn back on the washing machine, everything is ready. Quick fix to save $200.
I had the same error ( E90 on the same model), I replaced the control Board- part # 137007010 , $ 145.24 with free shipping for searspartsdirect.com. Easy repair, 2 screws to take the top, 4 screws to take the top panel and 6 screws holding the control board. When I saw the heat applied to the board, it is an indication of cold solder or broken SMD ( surface mount components) , it could it been a resistor or Capacitor. Thanks for tip. Regards, Fady.
We had severe weather and it started giving us this error when we got our lights back. I watched your video and I have to thank you because it worked! #YouRock
6 months ago I tried this method for the first time. It worked then. I had had to use it every time I wash. In fact, I have done it so many times I left the 2 screws out of the rear. NOW 6 months later, nothing doing. I am so frustrated with this stupid problem. It seems this fix only works so many times and the control panel face is warped but I could care less about that, I just want it to work. As many people that have had this problem, Frigidaire should recall and fix these machines or replace the control boards. GRRRRR
Bro !!! My washer was mia because of this code replaced the latch which was broke as soon as the error came up nothing tried this it worked. If this doesn't work it's a new control thing guys and even if this works eventually I'm sure you'll need it but it beats 150 bucks at this exact time before Christmas!!!!
Many thanks for your experience. I have error E90 and E93 on my washer Rex/Electrolux RJ10 (E93=confguration error) but fortunately I found the service manual and I have entered the configuration code like described in that document and I solved the problem!!! Search on google "ewm2000 ec delta 3 with neat cabinet" or "EWM2000". Sorry for my English!!! Regards
I moved my Electrolux machine laying on the side and obviously the PCB got wet. It did not clear by waiting as it was obviously not caused by some power glitch. E90 error now gone after a few minutes with the hair dryer, I owe D Cuthrell a beer!
Возникла такая же проблема. Феном сушить не вариант. Загнал в сервисный режим - ошибка не Е90, а Е91! Это отсутствие связи между внутренним блоком управления и блоком ввода данных. Снял переднюю панель, отключил шлейфы, вынул плату и ОПА, половина контактных частей дорожек в окиси! Прошелся нулёвкой, залудил аккуратно, прочистил контакты шлейфа и всё заработало. Не знаю чем там может помочь фен. Кстати, в таблице кодов ошибок, Е90 НЕТ! Это ошибка Е91!
If you have to keep repeating this procedure than you have a failed control board. If you try this fix...unplug machine first! Why does anyone think they need a computer to wash their clothes. This is a perfect example!
got the same dryer , mine stops after 20min and doesnt produce heat anymore , my tech says i need to change the electrical board , anyone know the price on that?
E90 has to do with water sensed in the chamber or pump. The washer senses that the load never finished or something went wrong. Simply unplugging and replugging back in, then setting to drain and spin with no spin should clear it.
Thank you this actually worked i was worried to have to do what the guy did to his washer i put a blanket in there about a week ago but since it has been raining i havent washed it and when i got home it kept beeping and i unplugged it several times and nothing and after trying this it seems to be working. Hopefully it stays that way and you saved me alot of trouble thank you again!
I've got the same exact problem with my Zanussi FE1446 and the only thing that helps is if I give it a single bang on top of the panel and then it stops but the error keeps coming back and it is really annoying :(
was doing this with the same problem,,took the computer board out to see if any solder was compromised by moisture and instead found a white wire leading to the door was loose,,,took it completely out and now my washer works perfectly every time,,odd without the wire but will conclude it was a door signal control.
Jamidd, sorry, it ended up being an empty hope. Even though my machine worked for some reason after the removal of the loose wire, the wire was the common to the door light. My machine still requires blow dryer heat to start. I removed my computer board hoping the moisture had compromised soldier but no white soldier ..all looked good. I guess i continue to blow dry for now. Good luck.
Unplugging the washer for any time did nothing to clear the error. The heat on the circuit board heating up one of the faulty components on the board is what reset the machine , worked for 2 months. till I ordered a new board. Unplugging the machine every time first to see if it would clear never worked.. Will never purchase anther Frigidaire anything in the future.
I do not try yet. But if this does not work, I will take the board off then put into the oven and bake it 220 degree for 8 minutes. Just like I fixed my HP printer board.
спаибо нихрена не понял но просушил феном электорнику и через пять минут запустилась машинка а случилось вот что при замене подшипника в процесе сборкиили плохо одел или забыл одеть патрубок сапуна пока стирала ничё а когда стала отжимать всё и случилось
This is not a typical error code recognized through the tech sheet, contained within the machine. Typically, the hair dryer has nothing to do with solving this issue. Unplugging the washer for a short time (usually 5 mins. or less) will clear any glitch, due to a power surge, etc.
son of a bitch! how the hell did you think to try this? saved my ass, now i know its moisture or something ill have to rework the boards. got admit i was very doubtful, but my socks are washing so shows what i know. thanks again
Worked for me too. Thanks for sharing your discovery. But what kind of nonsense is this? This video has over 10,000 views as I'm making this post. Clearly, it's defective. Out of the three major appliances I've purchased in the last 6 years, all three were made in america and two have already required major repairs. The moral of the story - don't buy american. I'm surely never buying Fridigaire or Whirlpool again.
Yes, it's shocking, but the 'hair dryer repair' actually worked. I've made note of the control board part number for when I get tired of drying my washer to start it.
I had this error code, so watching your video I used the hair dryer set on high for 1 minute, followed your instructions and for whatever reason caused it to error, your method worked. Your video allowed me to do this FIX start to finish in 5 minutes total. Now I'm washing again. Thanks
Thank you so much! Worked for me in 2023!
For me it was a very big problem removing the dryer that was on top of the washing machine, so I tried to warming up with a heater gun on front the unit. Whit care around the metal and plastic control front for some minutes. When reset the power the error 90 disappeared. Is incredible. Thanks very much for your video 👍
Thank you for generously sharing your 'insider' knowledge! You saved me from buying a new washer.
Thank you. I was able to fix my washer today without having the repairmen come fix it. I've let it sit for 4 years. Still works!
What a magic! I blew with cold air for 2 minutes, and it works after power reset.
Thank you for saving my time and money!
Amazing, i saved $300 in parts and reparation works here in Costa Rica. No need to buy a new mainboard. thank you so much, it is working even better!
You are a genius, the same washing machine, same error code, e90, same solution worked perfectly ... thank you very much.
Awesome! This works! Australian Electrolux machine, ran the hairdryer for about a minute and the error cleared by itself. Great clip, nice work.
Used the blow dryer to do a load of laundry again today , thanks for advice . I read all comments and wonder why the Frigidaire company has not recalled this machine and fixed the problem? Will never buy from them again . And judging by the amount of views on your hairdryer video a lot of people will not buy from them again!
Ditto here. Plug/unplug cleared it the first time. Holding Reset, 2 times after that. Nothing would clear it after that. Checked all the contacts, inspected the board, etc. Finally tried your hair dryer trick and - bam - it came to life.
New board is on the way. But in the meantime, we'll be washing our clothes with a hair dryer. Thx man!
Increíble!!!! Muchas gracias desde México!!!!
I hade the same E90 error code. You have the"better model" and I have the "good model", but this totally worked! I hope it continues to work without the hairdryer! Thanks for posting!
thank you for your insight. even with a dehumidifier running in auto mode 24/7/365, humidity must have still caused the e90 error. your remedy worked.
Yup! This really worked for me. Thanks Bill! I drained the drain pump n had to reattach the drain pump. During that process some left over fabric softener spilled near the circuits. Used the hair dryer , dried it out n Wallah back in Business. Liked n subbed👍🏾🤟🏾
Oh MY GOODNESS... I TRIED THIS AND IT REALLY WORKED. I JUST HAD TO LET THE DRYER SIT ALMIST 5 MINUTES ... SAVED ME A 85$ SERVICE CALL AND NO TELLN HOW MUCH FOR REPAIRS . THANK YOU SO MUCH !!!
LOISE BARNES 4who
Ало някои може ли да помогне моля
OMG, THANK YOU!!! I just went to start a load of clothes around 8 pm and got this message. The buttons nor the 15 minute unplug worked for me but this video saved my life. I imagined having to go the laundry mat the first week of work after summer vacation (I'm a teacher) and bout had a heart attack. Lol. Thanks so much for sharing!
It's likely a cold solder joint on the motherboard, the humidity breaks the connection
Excellent advise and it worked. I will limp along till the new one arrives. I'll repost in 14 days it the machine finally gives up the ghost.
It worked! Can't believe it - thanks you so much for taking the time to post this. I kept it unplugged whilst using the hair dryer for about a minute then plugged in and it worked! Nice one
It worked for us too!!! Thank you so much for taking the time to make and post the video! 🙏🏼
This worked for me! Thank you! About 1 minute with the hair dryer. I have a Whirlpool front loading and it worked. Woo hoo!
Legend after hours of messing with it, I found u.....thanks mate
This hair dryer fix-it still works! Thanks so much for sharing.
Even in Belgium this works !! have a Zanker washmachine and error 90 came on display, hairdryer did fixe it. Thanks for the tip.
This happened to us today. your solution worked like a charm. Thanks.
be careful not to heat to long and melt the front panel inside. It worked for me for about two months then nothing, I had to buy a new control board $120 on amazon.
Thanks a lot. It really helped us. With the help of your video we could fix the error with the hair dryer.
I was skeptical, but this worked like a charm!
Thanks so much for sharing this trick. It works for us and it is very easy!
You Are The Man!!! D Cuthrell! Idk how you figured that out but worked perfectly. Thank you!
I had the same error (E90 on the same model) and the Hair Dryer trick worked for me.
However, the problem was coming back over and over.
Obviously, this "patch" wasn't permanent, so I put two switches on the washing machine.
The first one is to turn on/off electricity (to avoid disturbing sound of the beeps).
The second one is to turn on/off a Christmas light that heats the control board. When the E90 error appears, I turn on the light for 1-2 minutes, then turn it off. When I turn back on the washing machine, everything is ready.
Quick fix to save $200.
Thank you, it works. Save me in middle of washing!!!
I had the same error ( E90 on the same model), I replaced the control Board- part # 137007010 , $ 145.24 with free shipping for searspartsdirect.com. Easy repair, 2 screws to take the top, 4 screws to take the top panel and 6 screws holding the control board.
When I saw the heat applied to the board, it is an indication of cold solder or broken SMD ( surface mount components) , it could it been a resistor or Capacitor. Thanks for tip.
Regards,
Fady.
Another satisfied customer! Worked like a charm on my washer. Thanks so much for sharing the knowledge. Gotta love livin' in the age of information!!!
We had severe weather and it started giving us this error when we got our lights back. I watched your video and I have to thank you because it worked! #YouRock
Wonder of wonders. Thank you for this simple and great solution.
Thank you very much!!! Worked like a charm!!! 😀 Hubby is very pleased with handy wife!! 😘
Not sure why this worked but it did! Thank you in 2020!
MARVELOUS! GREAT! SUPERB! FANTASTIC! CONGRATULATIONS! YOU RESOLVED THE PROBLEM WITH MY MACHINE. THANK YOU VERY MUCH!
6 months ago I tried this method for the first time. It worked then. I had had to use it every time I wash. In fact, I have done it so many times I left the 2 screws out of the rear. NOW 6 months later, nothing doing. I am so frustrated with this stupid problem. It seems this fix only works so many times and the control panel face is warped but I could care less about that, I just want it to work. As many people that have had this problem, Frigidaire should recall and fix these machines or replace the control boards. GRRRRR
It worked for me! Thank you so much for sharing!
I can’t believe this worked!! What in the world?! Thank you, thank you
Unbelievable...It worked..I'm blown away..Thank you so much..I just want to know how you figured it out? Brilliant
Thank you so much. Just tried it on my Electrolux efw1087 and it worked a charm !
Happy girl !!! :-)
Bro !!! My washer was mia because of this code replaced the latch which was broke as soon as the error came up nothing tried this it worked. If this doesn't work it's a new control thing guys and even if this works eventually I'm sure you'll need it but it beats 150 bucks at this exact time before Christmas!!!!
I cannot believe that worked!!!
THANK YOU!!!
Many thanks for your experience. I have error E90 and E93 on my washer Rex/Electrolux RJ10 (E93=confguration error) but fortunately I found the service manual and I have entered the configuration code like described in that document and I solved the problem!!! Search on google "ewm2000 ec delta 3 with neat cabinet" or "EWM2000". Sorry for my English!!! Regards
Masterpiece.. great great great 👍👍👍
I moved my Electrolux machine laying on the side and obviously the PCB got wet. It did not clear by waiting as it was obviously not caused by some power glitch. E90 error now gone after a few minutes with the hair dryer, I owe D Cuthrell a beer!
THANK YOU !!! You saved my day . Worked great.......how did you come up with a hair dryer ??
Worked like a charm. Thanks so much.
It works! Thank you so much for sharing!
WORKED LIKE A CHARM.. VERY FIRST CHARM!! THANK YOU!! I LOOOOOVE RUclips!!!!
THIS WORKS #E90
thanks worked for me so far 5 mins after i hair dryed it
You just saved me a bunch of money.. thanks :)
What is the reason for this? What is the connection between the use of the hair dryer to heat the panel board and clearing the CODE: E90? Thank you.
It does work i just tried it and worked first try....thank you
Thank you man saved me $$
Thank you! This video save my life
Thanks bro🙏🙏🙏
It worked but I eventually had to buy a new main control board Part Number: PS2367774. Installed the new part and problem fixed!
Worked for us too....THANK YOU THANK YOU THANK YOU
vielen vielen dank für den tip. meine maschine läuft wieder. unglaublich. wollte heute eine maschine kaufen. habe nun viel geld gespart. danke!!
Thanks worked great thank again for the help!!!!!!
Mine did same thing heat it up I don't get it
My alll lights flashing showing E90.I CLEAN my washing machine.try on of still no responce
Возникла такая же проблема. Феном сушить не вариант. Загнал в сервисный режим - ошибка не Е90, а Е91! Это отсутствие связи между внутренним блоком управления и блоком ввода данных. Снял переднюю панель, отключил шлейфы, вынул плату и ОПА, половина контактных частей дорожек в окиси! Прошелся нулёвкой, залудил аккуратно, прочистил контакты шлейфа и всё заработало. Не знаю чем там может помочь фен. Кстати, в таблице кодов ошибок, Е90 НЕТ! Это ошибка Е91!
If you have to keep repeating this procedure than you have a failed control board.
If you try this fix...unplug machine first!
Why does anyone think they need a computer to wash their clothes. This is a perfect example!
Thank you so much it worked!!
Costomer service claimed they didnt recognize the error code.
Помогло 100% - електролюкс ews1230 , была ошибка Е90. Насколько долго хватит этого ремонта, посмотрим!
got the same dryer , mine stops after 20min and doesnt produce heat anymore , my tech says i need to change the electrical board , anyone know the price on that?
E90 has to do with water sensed in the chamber or pump. The washer senses that the load never finished or something went wrong. Simply unplugging and replugging back in, then setting to drain and spin with no spin should clear it.
Thank you this actually worked i was worried to have to do what the guy did to his washer i put a blanket in there about a week ago but since it has been raining i havent washed it and when i got home it kept beeping and i unplugged it several times and nothing and after trying this it seems to be working. Hopefully it stays that way and you saved me alot of trouble thank you again!
Ok, going to try this in the morning. I began getting this error this time after running a machine clean cycle. Thanks for your post!
tribalbd how do you set the washer to drain and spin with no spin ?
Thank you... good info
I've got the same exact problem with my Zanussi FE1446 and the only thing that helps is if I give it a single bang on top of the panel and then it stops but the error keeps coming back and it is really annoying :(
I did it!! Ti woooooorrrrrrkkkkssss! Thanks you so much !!
Wow it worked! Thanks a lot!
well done
Sehr hilfreich
I have done this and it works
was doing this with the same problem,,took the computer board out to see if any solder was compromised by moisture and instead found a white wire leading to the door was loose,,,took it completely out and now my washer works perfectly every time,,odd without the wire but will conclude it was a door signal control.
Renee Brown was the wire coming from the control board ? How did you remove it ?
Jamidd, sorry, it ended up being an empty hope. Even though my machine worked for some reason after the removal of the loose wire, the wire was the common to the door light. My machine still requires blow dryer heat to start. I removed my computer board hoping the moisture had compromised soldier but no white soldier ..all looked good. I guess i continue to blow dry for now. Good luck.
Mine came back on tho
Thank you
Unplugging the washer for any time did nothing to clear the error. The heat on the circuit board heating up one of the faulty components on the board is what reset the machine , worked for 2 months. till I ordered a new board. Unplugging the machine every time first to see if it would clear never worked.. Will never purchase anther Frigidaire anything in the future.
Works amazing
Just 1 video?
I do not try yet. But if this does not work, I will take the board off then put into the oven and bake it 220 degree for 8 minutes. Just like I fixed my HP printer board.
Ok that worked! Crazy...
This worked for awhile and then stopped working ugh!!
спаибо нихрена не понял но просушил феном электорнику и через пять минут запустилась машинка а случилось вот что при замене подшипника в процесе сборкиили плохо одел или забыл одеть патрубок сапуна пока стирала ничё а когда стала отжимать всё и случилось
алексей корнеев thanks broo 💪💪💪💪🇲🇦❤❤🇲🇦🇲🇦🇲🇦
friend please if you can help me have a frigidaire gallery e75 series and chewed me
Heating by hairdryer trough to the electronic board is stupid idea you will burn the electronic components don't do that.
This is not a typical error code recognized through the tech sheet, contained within the machine. Typically, the hair dryer has nothing to do with solving this issue. Unplugging the washer for a short time (usually 5 mins. or less) will clear any glitch, due to a power surge, etc.
через 6 часов включить не смог- снова ошибка Е90 , отсырела что-ли. Метод временный- печалька.
son of a bitch! how the hell did you think to try this? saved my ass, now i know its moisture or something ill have to rework the boards. got admit i was very doubtful, but my socks are washing so shows what i know. thanks again
Worked for me too. Thanks for sharing your discovery. But what kind of nonsense is this? This video has over 10,000 views as I'm making this post. Clearly, it's defective. Out of the three major appliances I've purchased in the last 6 years, all three were made in america and two have already required major repairs.
The moral of the story - don't buy american. I'm surely never buying Fridigaire or Whirlpool again.
E60
E9F
Yes, it's shocking, but the 'hair dryer repair' actually worked. I've made note of the control board part number for when I get tired of drying my washer to start it.