How to FIX Bosch dryer E90 Error
HTML-код
- Опубликовано: 25 авг 2024
- 1. It is good to clean the filters first and make sure the sensors are also clean from dust and cloths remains.
2. also make sure the water pipe is not blocked - try to blow air with your month and listen if you hear water bubbling sound - if so - it is open and not blocked.
3. Power off the Machine.
4. Turn it on to any of the modes and as soon as you hear the machine "clicking" - before displaying the E90 Error - BANG the RIGHT side of the Bosch Drying Machine .
5. It should come back to life.
The reason the machine don't work - although you clean all the filters and sensors and places. it is because some places are hard to reach. therefore by hitting and banging the machine the dirt and cloth remains - fall off and the sensors give a "good to go" to the machine to start.
GOOD LUCK!
Bosch Serie 4 Tumble Dryer Model No. WTN83200GB. Can't believe it but after cleaning all the fluff out and putting it back together it still didn't work. So I banged the side and it worked! Absolutely brilliant, thanks.
The bang it on the side tip at the end actually worked. 🤣 Brilliant. Thank you.
Russian style
Thank you so much, my 25 month old Bosch suddenly sprung the E90 warning code despite little use since new. Cleaned it all out but there wasn't much fluff or lint in it. I even took the lid off to check the connections.
Turned it back on and it still didn't work but I could hear the relay clicking so a good old right hander to the machine and hey presto it fired straight into action, unbelievable, hopefully this has saved me a few hundred quid in repairs on such a new machine.
I had this error the third time just today. Everytime I come back to this video, evertime being in disbelief. Kick it!
I cannot believe it. I wanted to bring our series 8 still in warranty dryer to the service and then I saw this video. I had to try this and.. IT WORKED!!! That was awesome!! Thanks 1000x for posting it!
Thank you very much. The hidden area for cleaning was useful, but it is awesome that hitting it is what actually fixed the problem.
Thanks for sharing, I´ve just repaired the E90 Error by following what you suggested. great!
My Bosch series 8 dryer broke down this weekend (june 2022) I banged the sodes and now it’s working. I’m so happy
Love!
First time I got this error, I cleaned the filters and it turned on right away.
This way the second time I got this error but after cleaning out the filters it still wouldn't work.
I watched your video up to the secret lint container and found one in my PITSOS drier which was filled with nasty goop. I cleaned it all out but still wouldn't work ..
So I continued your video.
When I saw your final advice was to bang on the drier a few times, I busted out laughing! ...but tried it anyway. 😁 IT WORKED!!! haha
Thank you for this video!
תודה, אח שלי!
כמה דפיקות מהצד והתחיל לעבוד.
The method worked for me. Not needed to turn on machine in my case, just 3 strong bangs from the right side.
Be aware this fault is caused by a burnt relay on the pcb. Risk of fire if not repaired correctly.
As an appliance engineer this is bad advice.
Nah not necessarily. I cleaned the dust collector and the filter and it worked right after, not a coincidence.
I had exactly the same problem. I followed the "banging protocol" just when the relays ticking sound begins. It worked!!!! The dryer start working. It was a real saver in a rainy day. Thank Avi for this excellent tip. However, for me, it is a short term solution. Every time I need to make it work, I need to repeat the banging . My dryer is only 2 years old, and I rarely use it. Shame on you Bosch for such a poor quality product.
This worked for me too :) 2 bangs and it was ready . Thank you
For anyone having this problem, you need to call in a Bosch technician. It's a faulty electronic board. I just had this serviced so this is the real problem and nothing else.
I just did it and it bloody worked no way
My gosh it worked I hit it or shake it a bit .. you solved my problem just now.
Thanks a lot for the video. Saved me a lot of extra effort. 100% worked for me. 🙌
CRAZY!! The banging worked
😂yes, it worked! Thanks so much!
Unbelievable! It really works! Thanks man.
Wow avi you’re the best . Easy fix when Bosch says e90 get electronics expert. I prefer Avi Weiss expert
Thanks Avi. We had an E90 message but didn't have a clue what it meant. We cleaned everything, but still didn't work. However, we followed your advice and gave it a good thump on each side and a shake … it now works perfectly! Thank you so much.
Yeah! Slap from side just in the corner where air output is. Works well. :D
😂😂😂
That’s brilliant! Thanks for the tip, mate! It really worked 👏🏼👏🏼👏🏼
Just got this on my machine that’s not even 6 months old and we normally keep on top of cleaning it out. Our last dryer only lasted 4 years so I’m not sure how good these things are.
I can’t believe I just got rickrolled over a dryer video….
It worked, thank you
I tired all
3.pcb changed still e90 showing error plz help
comment from year 2022
I will test to fix on today, will update result soon
Thx man working now
Most probably you trigger the non functionng relay work again.
The E90 code can also mean that a wire is not plugged in inside the machine.
Ha ha, worked!
Bit of a pain though to drag it and do this, won't be buying Bosch again
I wonder if dryers are just bad. Our first Beko one lasted 4 years or something. Current Bosch one has got this error code after just 6 months. Didn’t want to be spending 1000 on a dryer…
Worked! Thanks
Genius!
This actually worked... wtf
Hi. Tnx! I did the same and worked.
Instantly my memories came to my maind when we need to kick candy machine after he took our money and didn't gave us anything :D
AHAHAHAHAH
works!
Gave it the good ol pinball machine shake and it started
What do Ilolatolash machines do? E9F
Omfg 🤣.. I thought my brother was going to send the dryer through the wall.. but yeah still not working dammit!
I can not standed siemens washing machine fault code e90
Looool. That's what they did before the internet. Kick it! And it works.
The Fonz
Worked for my Siemens iQ300 to. Wtf
u had to do what with your mouth?
😀😀😀
E36
Amateur technician he dont know what he are teaching...E90 are problem in power module...
The FACT it worked! and until today it is working. it is one of the sensors that was covered with dust/fluff
This is my problem E09? I clean it but everytime the sound annoying me
😂😂😂😂
Bullshit video, E90 is control board issue.
Not helpful at all.
E36