Hi I have a Macbook pro Apple M3 8GB macOS 14.6.1 (23G93). Unfortunately my image takes for ever to download/generate it took about 30-40 minutes. How do I make it run faster? Also just want to say thank you so much for this video I could not have done it without you!
This is fantastic video that has really helped me a lot. I really really appreciate it. I do have a request can you make a step by step video showing how to install roop 3 on Mac?
Muy buen video. Si sigues el Tutorial paso a paso, tal y como se muestra, la aplicación funciona perfectamente. En mi caso me tomo 1 hora aproximadamente instalarlo, pero ya funciona a la perfección.
After this: pip install -r requirements_versions.txt I see this: note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × Getting requirements to build wheel did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. Please let me know what i should to do
and after that i tried: python entry_with_update.py --disable-offload-from-vram and i see this: Update failed. No module named 'pygit2' Update succeeded. [System ARGV] ['entry_with_update.py', '--disable-offload-from-vram'] /Users/khaled/Fooocus/build_launcher.py:8: SyntaxWarning: invalid escape sequence '\p' win32_cmd = ''' Traceback (most recent call last): File "/Users/khaled/Fooocus/entry_with_update.py", line 46, in from launch import * File "/Users/khaled/Fooocus/launch.py", line 22, in from modules.launch_util import is_installed, run, python, run_pip, requirements_met, delete_folder_content File "/Users/khaled/Fooocus/modules/launch_util.py", line 10, in import packaging.version ModuleNotFoundError: No module named 'packaging'
This video has just saved me 1000 - 2000 USD. Because my 5-year-old notebook (HP Z-Book) is too slow, I wanted to buy a Mac for Foocus. But I see that even a Mac Pro with M-Chip is not much faster than my old box ;-)
followed everything step by step and it was all installed, however the begnning of the terminal never changed to (fooocus) after restarting it and because of that, nothing really worked properly. Would love it if this was explained to people who don't have a techy background.
Hello and thank you for the video: it worked perfectly. I have two questions: Will it be possible to update the software through the terminal? If I wanted to remove everything, do you have any quick terminal commands? Many thanks
Does anyone know the current gneration time for an imagine with M1 / 8GB? Because if it is still 300sec it might not be worth installing tbh. Nonetheless, great toturial bro, thanks a lot :)
Thanks a lot, very helpful video! Do you think you could help me out with thing? I need a bit of guidance on how to uninstall everything again. I plan to reinstall it later, so I want to make sure I do it properly. Could you create a video tutorial on this topic?
Hello, I have an error while intalling the requirements_versions.txt. This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error What should i do?
I'm on MacOS version 11.6 and I don't have Xcode. Can I still use the AGI with CPU instead? >>> if torch.backends.mps.is_available(): ... mps_device = torch.device("mps") ... x = torch.ones(1, device=mps_device) ... print(x) ... else: ... print("MPS device not found. Using CPU instead.") ... x = torch.ones(1) ... print(x) ... MPS device not found. Using CPU instead. tensor([1.])
Me again. Where do you get that Fooocus git:(main) x open. ?? If I write that and press enter it gives me error. I am stuck at this point. I don't understand what exactly I am not doing right. Can you please answer? After pressing Enter is giving zsh: number expected
Hello man! If you were to put together today's guide to install Fooocus on Ubuntu with an AMD GPU, would you make at least one person happy? :) After updating AMD ROCm6.0 packages, it gives an error. Do a good deed and I wish you millions of subscribers, since this topic is relevant and many want to effectively use their AMD. Since on Windows the speed is 4-5 times slower. Health to you and your loved ones!🎉
@@tech-practice9805 Hello! Today I reinstalled Ubuntu 22.04.3 LTS, 6.5.0-14-generic, the latest version ROCm6.0 and tried to install Fooocus on a clean one. There were no errors during installation at all. But when I open the page and enter Promt, suddenly an error appears. [Parameters] Adaptive CFG = 7 [Parameters] Sharpness = 2 [Parameters] ADM Scale = 1.5 : 0.8 : 0.3 [Parameters] CFG = 4.0 [Parameters] Seed = 1075081810740698132 [Parameters] Sampler = dpmpp_2m_sde_gpu - karras [Parameters] Steps = 30 - 15 [Foocus] Initializing... [Foocus] Loading models... Refiner unloaded. [Foocus] Processing prompts... [Fooocus] Preparing Fooocus text #1 ... Segmentation fault (memory image flushed to disk) What can be wrong? My GPU is 6700 xt, 12g, RAM 32g.
hi i wanna ask. i already doing this setup around 6 times and always failed at instruction "pip install -r requirements_versions.txt". always comes out warning error "ERROR: Ignored the following versions that require a different python version: 1.6.2 Requires-Python >=3.7,=3.7,=3.7,=3.7,
I have "AssertionError: Torch not compiled with CUDA enabled" error when "python entry_with_update.py" command run. I installed on Intel MacBook pro. Can anyone help me to fix it? Thanks.
Hello thank you for your instruction. I installed run it successfully on MBP 15" 2018 i7 AMD GPU 4GB and 16GB RAM. How do I start Fooocus local website again after closing Terminal? Do I have to repeat the whole procedure in Terminal to start again?
For anyone who may have the same issue, I figured it out a minute after posting the question. Apple M1 Max 32GB. Open Terminal > conda activate fooocus > enter You will see the left has changed from (base) to (fooocus) Now you can enter python entry_with_update.py If 'conda activate fooocus' doesn't work, you might have called your folder 'Fooocus' or 'AI Stable Diffusion' or something like this and will need to make sure your command matches the folder name.
@@itsokai Hey that is the same process I was doing a couple of days back and it was working fine. Today I just tried to do the same thing again and right after python entry_with_update.py im getting an error "No such file or directory". Have you gotten this issue?
@@alejandrozamora9021 Mine also had the same issue recently. I had to put in 'python ' and then click and drag the 'entry_with_update.py file into Terminal and press enter. That worked for me. Also make sure you change the session from (base) to (fooocus)
after python entry_with_update.py I get this error: File "/Users/user/miniconda3/envs/fooscus/lib/python3.10/site-packages/sympy/core/numbers.py", line 4567, in _sympy_converter[type(mpmath.rational.mpq(1, 2))] = sympify_mpmath_mpq AttributeError: module 'mpmath' has no attribute 'rational' 😮💨
Thanks I installed and used it a couple of days ago. Unfortunately, I tried on safari today but it won't work. It says Safari can't connect to the server. Is there something that I have to do on Terminal everytime I want to start Fooocus?
doesn't work for me, don't know why. Did everything step by step and when I get to the directory opening part it just said: cd: no such file or directory: Fooocus , and it isn't pulling up the directory. :(
To reopen it, skip the installation part. Run these: conda activate fooocus, then change to your Fooocus directory: cd Fooocus, finally: python entry_with_update.py
kindly find below error let me know how can i fix it if torch.backends.mps.is_available(): ... mps_device = torch.device("mps") ... x = torch.ones(1, device=mps_device) ... print (x) ... else: ... print ("MPS device not found.") ... Traceback (most recent call last): File "", line 1, in AttributeError: module 'torch.backends' has no attribute 'mps' >>>
Thanks ya so much. When i try to install, to finish (when its runs) show me this message: AttributeError: module 'mpmath' has no attribute 'rational'. Help me please :(
Quite slow honestly, my two year old ROG with 3070i gpu 8g vram is a lot faster, maybe m1, m2, m3 chips aren’t optimised for generative ai, just a guess.
Hi! I've gotten all the way to starting generating in Fooocus. But nothing happens when i start "generate". Its saying "waiting for task to start" in Fooocus in my browser. In terminal, it says: AttributeError: module 'mpmath' has no attribute 'rational' Total VRAM 16384 MB, total RAM 16384 MB Set vram state to: SHARED Always offload VRAM Device: mps VAE dtype: torch.float32 Any idea what im doing wrong? I'm in a Macbook Pro M1, with 16gb ram
Hello, I am failing in the script test, what could be the reason? My Computer: macOS Monterey 12.6.3 iMac (Retina 5K, 27-inch, 2020) 3,6 GHz 10 Çekirdekli Intel Core i9 AMD Radeon Pro 5700 XT 16 GB Terminal: (fooocus) grafik-1@Grafik-1-iMac ~ % python Python 3.10.12 (main, Jul 5 2023, 15:34:07) [Clang 14.0.6 ] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import torch >>> if torch.backends.mps.is_available(): ... mps_device = torch.device("mps") ... x = torch.ones(1, device=mps_device) ... print (x) ... else: ... print ("MPS device not found.") ...
@@tech-practice9805 there is no such a step to install miniconda? did i skip something? installed fooocus to my home directory and then cd fooocus. thats all.
hello can u help?)) why so : xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
U need to buy colab compute units...free colab is over now u cant work for free either change email or buy compute units which is 12 dollars per 100 compute units
After this: pip install -r requirements_versions.txt I get this: note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × Getting requirements to build wheel did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. Please let me know what i should to do
For everyone getting stucked. Use maximum Python 3.10-11. Everything newer (for example 3.12) is not being supported.
Hi I have a Macbook pro Apple M3 8GB macOS 14.6.1 (23G93). Unfortunately my image takes for ever to download/generate it took about 30-40 minutes. How do I make it run faster? Also just want to say thank you so much for this video I could not have done it without you!
same
superb video, works on my M2 Max
This is fantastic video that has really helped me a lot. I really really appreciate it. I do have a request can you make a step by step video showing how to install roop 3 on Mac?
Muy buen video. Si sigues el Tutorial paso a paso, tal y como se muestra, la aplicación funciona perfectamente. En mi caso me tomo 1 hora aproximadamente instalarlo, pero ya funciona a la perfección.
After this:
pip install -r requirements_versions.txt
I see this:
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Please let me know what i should to do
and after that i tried:
python entry_with_update.py --disable-offload-from-vram
and i see this:
Update failed.
No module named 'pygit2'
Update succeeded.
[System ARGV] ['entry_with_update.py', '--disable-offload-from-vram']
/Users/khaled/Fooocus/build_launcher.py:8: SyntaxWarning: invalid escape sequence '\p'
win32_cmd = '''
Traceback (most recent call last):
File "/Users/khaled/Fooocus/entry_with_update.py", line 46, in
from launch import *
File "/Users/khaled/Fooocus/launch.py", line 22, in
from modules.launch_util import is_installed, run, python, run_pip, requirements_met, delete_folder_content
File "/Users/khaled/Fooocus/modules/launch_util.py", line 10, in
import packaging.version
ModuleNotFoundError: No module named 'packaging'
CMD Failed requirements: install -r "requirements_versions.txt"
stderr: ERROR: Invalid requirement: 'pip install Pillow==9.2.0' (from line 22 of requirements_versions.txt)
I get the exact same message. Did you find a solution?
Same for me on my Mac M1 Max, 32 Gb, Ventura 13.1
Thank you immensely; the explanation was impeccable and functions splendidly.
This video has just saved me 1000 - 2000 USD. Because my 5-year-old notebook (HP Z-Book) is too slow, I wanted to buy a Mac for Foocus. But I see that even a Mac Pro with M-Chip is not much faster than my old box ;-)
The laptop shown in this video doesnt have the M-chip. It has an intel chip and a radeon pro 5500 gpu.
followed everything step by step and it was all installed, however the begnning of the terminal never changed to (fooocus) after restarting it and because of that, nothing really worked properly. Would love it if this was explained to people who don't have a techy background.
Helped a lot..💯💯
Glad it helped
followed each step, but it's blocking after the pip 3 install
Nice video! It works perfectly. But after the installation, what command should I use to run Focuuus when I want?
thanks! After installation, the same steps (skip the installation part such as 'pip install ...') can be used to run
Thanks Mate, great video.
Greetings from Mexico.
Thanks for watching!
you are awesome, thank you man, I will use it for my live sets!
I need Help after i paste the verify Script in the terminal it says: MPS device Not found
What's your Mac spec? Did you install the pytorch-nightly?
@@tech-practice9805 Same here. "MPS device not found." I'm on Macbook Air M1Big Sur.
@@Seldoon182 Same here
Hello and thank you for the video: it worked perfectly.
I have two questions:
Will it be possible to update the software through the terminal?
If I wanted to remove everything, do you have any quick terminal commands?
Many thanks
following
Does anyone know the current gneration time for an imagine with M1 / 8GB? Because if it is still 300sec it might not be worth installing tbh. Nonetheless, great toturial bro, thanks a lot :)
thank you for your content! that's helps me a lot ;)
Happy to hear that!
Thank you very much! clear and concise.
Wow! thank you for this content! Great step by step
Glad you enjoyed it!
Thanks a lot, very helpful video! Do you think you could help me out with thing? I need a bit of guidance on how to uninstall everything again. I plan to reinstall it later, so I want to make sure I do it properly. Could you create a video tutorial on this topic?
AMAZING TUTORIAL!! Thank you so much!!
Hello, I have an error while intalling the requirements_versions.txt.
This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
What should i do?
Yes, I'm having the same issue. Were you ever able to figure it out?
after typing this command, the download of the 6gb file completes, but it stays at 100% and I can't move forward and do anything else
I'm on MacOS version 11.6 and I don't have Xcode. Can I still use the AGI with CPU instead?
>>> if torch.backends.mps.is_available():
... mps_device = torch.device("mps")
... x = torch.ones(1, device=mps_device)
... print(x)
... else:
... print("MPS device not found. Using CPU instead.")
... x = torch.ones(1)
... print(x)
...
MPS device not found. Using CPU instead.
tensor([1.])
Me again. Where do you get that Fooocus git:(main) x open. ?? If I write that and press enter it gives me error. I am stuck at this point. I don't understand what exactly I am not doing right. Can you please answer? After pressing Enter is giving zsh: number expected
Hello man! If you were to put together today's guide to install Fooocus on Ubuntu with an AMD GPU, would you make at least one person happy? :) After updating AMD ROCm6.0 packages, it gives an error. Do a good deed and I wish you millions of subscribers, since this topic is relevant and many want to effectively use their AMD. Since on Windows the speed is 4-5 times slower. Health to you and your loved ones!🎉
thank you! I will upload it soon
@@tech-practice9805 I give you blessings, good man.:)
@@tech-practice9805 Hello! Today I reinstalled Ubuntu 22.04.3 LTS, 6.5.0-14-generic, the latest version ROCm6.0 and tried to install Fooocus on a clean one. There were no errors during installation at all. But when I open the page and enter Promt, suddenly an error appears.
[Parameters] Adaptive CFG = 7
[Parameters] Sharpness = 2
[Parameters] ADM Scale = 1.5 : 0.8 : 0.3
[Parameters] CFG = 4.0
[Parameters] Seed = 1075081810740698132
[Parameters] Sampler = dpmpp_2m_sde_gpu - karras
[Parameters] Steps = 30 - 15
[Foocus] Initializing...
[Foocus] Loading models...
Refiner unloaded.
[Foocus] Processing prompts...
[Fooocus] Preparing Fooocus text #1 ...
Segmentation fault (memory image flushed to disk)
What can be wrong? My GPU is 6700 xt, 12g, RAM 32g.
Would a Macbook Air 2017 8gb RAM be enough? Or too slow?
Can you describe the difference between Running on Local URL and Puplic URL?
Local URL means accessible from local network. Public means accessible from public (global)
AMAZING!! Thank you so much🎈
veryyyy goood! thaks!!!
hi i wanna ask. i already doing this setup around 6 times and always failed at instruction "pip install -r requirements_versions.txt". always comes out warning error "ERROR: Ignored the following versions that require a different python version: 1.6.2 Requires-Python >=3.7,=3.7,=3.7,=3.7,
I have "AssertionError: Torch not compiled with CUDA enabled" error when "python entry_with_update.py" command run. I installed on Intel MacBook pro. Can anyone help me to fix it? Thanks.
Hi, sorry to hear that. Does your macbook has AMD GPU? I think it needs apple silicon or AMD GPU.
Hello thank you for your instruction. I installed run it successfully on MBP 15" 2018 i7 AMD GPU 4GB and 16GB RAM. How do I start Fooocus local website again after closing Terminal? Do I have to repeat the whole procedure in Terminal to start again?
Hi! The 2nd time, open terminal, change to Fooocus location, activate virtual env, skip the installation, run the python command
@@tech-practice9805 Thank You :-)
Very helpful. Thank you!
It's very helpful! Thanks
Glad it was helpful!
What is the most efficient way to open Fooocus once again, after I have closed the environment in Terminal?
For anyone who may have the same issue, I figured it out a minute after posting the question. Apple M1 Max 32GB.
Open Terminal > conda activate fooocus > enter
You will see the left has changed from (base) to (fooocus)
Now you can enter python entry_with_update.py
If 'conda activate fooocus' doesn't work, you might have called your folder 'Fooocus' or 'AI Stable Diffusion' or something like this and will need to make sure your command matches the folder name.
@@itsokai Hey that is the same process I was doing a couple of days back and it was working fine. Today I just tried to do the same thing again and right after python entry_with_update.py im getting an error "No such file or directory".
Have you gotten this issue?
@@alejandrozamora9021 Mine also had the same issue recently. I had to put in 'python ' and then click and drag the 'entry_with_update.py file into Terminal and press enter. That worked for me.
Also make sure you change the session from (base) to (fooocus)
after
python entry_with_update.py
I get this error:
File "/Users/user/miniconda3/envs/fooscus/lib/python3.10/site-packages/sympy/core/numbers.py", line 4567, in
_sympy_converter[type(mpmath.rational.mpq(1, 2))] = sympify_mpmath_mpq
AttributeError: module 'mpmath' has no attribute 'rational'
😮💨
Did you fix it ? Same issue for me too
Thanks I installed and used it a couple of days ago. Unfortunately, I tried on safari today but it won't work. It says Safari can't connect to the server. Is there something that I have to do on Terminal everytime I want to start Fooocus?
If it worked couple of days ago it should still work. Did you also use Safari? Can you try other web browser?
doesn't work for me, don't know why. Did everything step by step and when I get to the directory opening part it just said: cd: no such file or directory: Fooocus , and it isn't pulling up the directory. :(
me show same problems
How do I re open Fooocus if ive already installed everything once but closed the terminal?
To reopen it, skip the installation part. Run these: conda activate fooocus, then change to your Fooocus directory:
cd Fooocus, finally: python entry_with_update.py
please help, i have a 32gb macbook pro m1 max and its going too slow, after 30 minutes its still loading
are you stuck on 'Waiting for task to start?'..same here, got the same MacBook :/
the same! but never starts
Hi did you ever figure this out im having the same issue. I would really appreciate the help
What are the minimum specifications of a MacBook to have good performance?
I think for apple silicon (M1 2 or 3), 16GB unified RAM should give good performance. But I only have 8GB one which is slow.
I just get "if" after verification. can someone help?
Please Help! I did all the procedure, but at last the Local URL never appeared. what did I missed?
After that Started deferents dowloadings an after nothing else happened
HI NEED INFORMATION FOR FOOOCUS FOR INTEL ARC VIDEOCART PLEEEEEEASE
have you tried the steps as shown in ruclips.net/video/IcfEWVvrzrA/видео.html, the directml should also works for ARC
When I type cd Fooocus I get "cd: no such file or directory: Fooocus" I have a M1 Mac mini. What should I do?? Thanks in advance
Hi! Did you download the repo? (got clone ...)
@@tech-practice9805 Thanks 🙏 I made it work!! It’s slow but it works!
@@tech-practice9805 downloaded the repo but got the same error. Not sure how to sort it out, any idea?
能远程帮我安装吗？看着太复杂了，我用MACPRO，2021年的
I am happy to offer a consulting service if interested: ko-fi.com/s/18e38d71b6
Hi I cannot access the GPU History in my Mac. How can I use it like you do ? Thanks !
Hi, I made a tutorial on ruclips.net/video/USpvp5Uk1e4/видео.html
@@tech-practice9805 Thanks !
Interesting, I looking forward to getting a new faster computer 😁
and larger ram 🎉
nothing works for me
kindly find below error let me know how can i fix it
if torch.backends.mps.is_available():
... mps_device = torch.device("mps")
... x = torch.ones(1, device=mps_device)
... print (x)
... else:
... print ("MPS device not found.")
...
Traceback (most recent call last):
File "", line 1, in
AttributeError: module 'torch.backends' has no attribute 'mps'
>>>
Hi, what's your macbook spec? M processor?
Hi, I would like to install it on Mac OS Catalina, I couldn't install it. Can you guide me please. Thanks
Hi, have you followed my tutorial steps? What errors did you get?
thank you!
thank you very much !!!! i think u must work mor eon voice over .. quality is good focus more on speaking improve it more .
Thanks ya so much. When i try to install, to finish (when its runs) show me this message: AttributeError: module 'mpmath' has no attribute 'rational'. Help me please :(
The mapmath caused issue. Can try to downgrade it:. Run: pip install -U mpmath==1.3.0
after
pip install -r mpmath==1.3.0
ERROR: Could not open requirements file: [Errno 2] No such file or directory: 'mpmath==1.3.0'
@@tech-practice9805
sorry, try: pip install -U mpmath==1.3.0@@m2003g
Excellent, I searched for several days until I saw this code, thank you very much now I will be your fan@@tech-practice9805
how to do Change to the new Fooocus directory? I am stuck at this point (4:39)
Same for me, they ask me for a username and password. Did you find a solution ? Thanks
@@bellevue11 unfortunately not. But I found information that this program works very slowly on Mac, regardless of the specification. So I gave up.
thank you!
You're welcome!
Can someonr help me? I try to run this on my imac m1 and it says I need an application from appstore...wich aplication do I need to run this?
Hi! What application was it?
Oh sorry, I'm trying a different method. Thanks anyways! :) @@tech-practice9805
its okey for this program to take about 2 hours to render a picture on my base model macbook air m1?
8GB RAM macbook air? It will need to swap memory using hard disk so it can be very slow.
can i use it in and install in a macbook pro M3? its 8gb, the base model
yes, I think the installation is the same. But it can be slow as it has only 8GB.
@@tech-practice9805 and now that i have it installed, how do i close and open fooocus?
all things are differents in 15 november 2024
do we need internet later on to generate images?
No internet needed after installation.
i have error on the python MDS test :"MPS device not found" i have followed tutorial
what macbook spec do you have?
mac M1 big sur@@tech-practice9805
@@tech-practice9805 same here. I'm in MPP 2021 Sonoma. Please help ;-)
@@tech-practice9805 I have the same error. I'm on an M1 Macbook Pro - 16 GB RAM. Ventura 13.6.3
Attention impossible d'installer fooocus en local sur macbook pro avec puce Intel !
Fuck is 40 hours installing
It is showing error in subprocess
please check your python version, try python 3.10
How can I open it again?
Open terminal, activate the env (conda activate ..), then run: python entry_with_update.py
Quite slow honestly, my two year old ROG with 3070i gpu 8g vram is a lot faster, maybe m1, m2, m3 chips aren’t optimised for generative ai, just a guess.
i have a 32gb imac, amd 8gb rx580 pro GPU and slow, 13-20 mins a image. cant see to get it faster
Me too, i´ve a macbook pro, 32gbm m1 max
please help, it says the following error :
x@x-MacBook-Air fooocus % python entry_with_update.py
Already up-to-date
Update succeeded.
[System ARGV] ['entry_with_update.py']
Python 3.10.12 (main, Jul 5 2023, 15:02:25) [Clang 14.0.6 ]
Fooocus version: 2.2.1
Traceback (most recent call last):
File "/Users/x/Fooocus/entry_with_update.py", line 46, in
from launch import *
File "/Users/x/Fooocus/launch.py", line 127, in
from webui import *
File "/Users/x/Fooocus/webui.py", line 10, in
import modules.async_worke
Hi!
I've gotten all the way to starting generating in Fooocus. But nothing happens when i start "generate". Its saying "waiting for task to start" in Fooocus in my browser.
In terminal, it says:
AttributeError: module 'mpmath' has no attribute 'rational'
Total VRAM 16384 MB, total RAM 16384 MB
Set vram state to: SHARED
Always offload VRAM
Device: mps
VAE dtype: torch.float32
Any idea what im doing wrong?
I'm in a Macbook Pro M1, with 16gb ram
Hi! Can you check if you installed Pytorch successfully?
Sure, how to i do that? @@tech-practice9805
Hello, I am failing in the script test, what could be the reason?
My Computer:
macOS Monterey 12.6.3
iMac (Retina 5K, 27-inch, 2020)
3,6 GHz 10 Çekirdekli Intel Core i9
AMD Radeon Pro 5700 XT 16 GB
Terminal:
(fooocus) grafik-1@Grafik-1-iMac ~ % python
Python 3.10.12 (main, Jul 5 2023, 15:34:07) [Clang 14.0.6 ] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import torch
>>> if torch.backends.mps.is_available():
... mps_device = torch.device("mps")
... x = torch.ones(1, device=mps_device)
... print (x)
... else:
... print ("MPS device not found.")
...
step4: conda env create -f environment.yaml ------ got this error: zsh: command not found: conda
how was your miniconda installation? should accept all defaults
@@tech-practice9805 there is no such a step to install miniconda? did i skip something? installed fooocus to my home directory and then cd fooocus. thats all.
@@tech-practice9805 ok now works. i thought i dont need to do 1st step because i have automatic 1111.
hello can u help?)) why so : xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
Hi! Looks like a Commanlinetools issue. Can you reinstall it?
@@tech-practice9805 i ll try thx)
fatal: destination path 'Fooocus' already exists and is not an empty directory.
im getting this error
U need to buy colab compute units...free colab is over now u cant work for free either change email or buy compute units which is 12 dollars per 100 compute units
Thanks!
After this:
pip install -r requirements_versions.txt
I get this:
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Please let me know what i should to do