This week we are making repairs needed to take the Ranger to the Drag strip. It went downhill very quickly and then had to do some minor firefighting. #2300gearjammer
That inspection/jump light that bust are illegal in the U.K. as a friend of mine who worked at an MOT Station was working on a car lamp fell and the spark ignited fuel on the floor of workshop he was working on the fuel tank replacing something . He got 90% 3rd degree burns his overalls melted being nylon sticking to him made a real mess of him ! We have enclosed ones now with a rubber surround so they bounce if they fall and they’re 12 Volt bulbs.. this was 20 year ago they will be LED now much safer …. Be carful bro get an LED one prevent accidents like that …
Wow that's terrible. I agree though! I have a plastic LED light I usually use but it was on another project in that moment. It's crazy fast things can get real bad.
What did you do to the ac line? I have a 93 I’m SVO swapping and using the ranger accessory’s to keep AC but my line runs to the side b4 running forward where as yours runs forward and then turns. Talking about at the dryer hookup
Hm. I'll have to look a little closer. Maybe there was a split year or some option that made them different like dealer or factory installed AC. I run the original AC lines that I gave a little extra bend at the compressor
@@2300gearjammer hell 9.31 is right there beside my road course CMC spec car in the 1/8🤣, ran 9.20 flat but the clutch wont liking that power shift to 2nd and 3rd at all and had to blip the throttle for it to grab lol
@@2300gearjammer best one i had in my TC was one from Advance Auto, for the life of me i cant remember the name of it but was an aftermarket brand for an SVO 9-1/4”. After a couple hundred miles it gripped great, went to do a burnout in what i thought was first but was 3rd and cut the car off lol, fired it back up and bounced it off the limiter and the tires lit up then i realized it was 3rd lol. Need to get my TC back out, got it down to an 8.70 at full weight been sitting for 10+yrs now
@@young11984 wow! A TC in the 8's is getting it done. Don't worry about that mess up, I've launch mine in 3rd gear before. Lol all my blk mustang burnouts are 3rd gear on purpose.
😂🤣😂🤣 that resurfacing job went really fast especially after you spent sooooo much time with the file making sure that it was true and super flat and you actually spent the time to put it back in the tool box. When I get finished with a tool it normally ends up directly below where I was using it on the ground or the sand until I need it again because I just drop it then bitch because I can't find it. Think your luck is bad Ive got a 347 that I built hanging on the hoist for the second time pulling it out due to the deck was cracked the first time I pulled it then put it back together wondered what happened to my 50 psi oil pressure so decided to prime up the system again and the oil pump was locked up 🤬🤬🤬🤬😭😭😭😭 so with a 7qt pan on a 347 in a 79 pinto that engine has to come out again because that pan isn't moving at all . But hopefully it will be the last time I have to pull it. That ranger is pretty cool and I can't wait to see what you squeeze out of it at the track, hopefully its not another freeze plug that gets squeezed out and vaporizes 🤣😂 I really can't wait to see what you get the pinto to run because they are super lightweight and if you get it to launch like the silver one on RUclips that had to peddle it to keep from going to fast then you will be squeezing out some 8s maybe in the 60ft 🤣😂🤣 nah the 1/4 . Im sure that you have seen the silver pinto that looks like it jumps on the launch. Sorry for the book I wrote but maybe you can get some $$$ out of it after you get it edited 😂🤣😂🤣 BYYYEEEE. 👊🔥
Hahaha well about setting a tool down thing... Watch again, I was running the belt sander and then walked away to go get that file and it was in my pocket the whole time 😂😂
@@2300gearjammer 🤣😂🤣😂 im bad about that as well, my pockets turn into mini toolboxes then I can't find that tool again until I go to clean my pockets out before I shower 🤣😂🤣
@@2300gearjammer 🤣😂🤣 that's too funny and this whole time I thought that I was the only one that did stuff like that 😂🤣 im the world's worst and when I do it i look around and see if anyone saw it then try to play it off 😂🤣😂 like I meant to do that, I knew that I had the flashlight in my hand shining it around looking for the stinking flashlight 🤣😂🤣😂😁🤘😎
Didn’t know ryobi made milling machines. You learn something every day
It's in my loan a tool program too.
Haha, laughed out loud at, "we're just going to take it slow belt-sand belt-sand... file tap tap". Hahahaha!!!
Quality. Job One. 😂
That inspection/jump light that bust are illegal in the U.K. as a friend of mine who worked at an MOT Station was working on a car lamp fell and the spark ignited fuel on the floor of workshop he was working on the fuel tank replacing something . He got 90% 3rd degree burns his overalls melted being nylon sticking to him made a real mess of him !
We have enclosed ones now with a rubber surround so they bounce if they fall and they’re 12 Volt bulbs.. this was 20 year ago they will be LED now much safer ….
Be carful bro get an LED one prevent accidents like that …
Wow that's terrible. I agree though! I have a plastic LED light I usually use but it was on another project in that moment. It's crazy fast things can get real bad.
Ayyyyeee!!!! Wasup my man!
Yooooo
Sorry it took me so long to find you bro, loving the content !
Thanks a ton and every comment helps bump the channel up. 🐎🐎
You running a distributor on that setup? Or still using the batch fire. Also are u running the 8 plugs.
nice , my Turbo ranger is a little differnt , heres a sub for ya
Thanks a ton. Your ranger being different is probably a great thing 😂
Homemade water feature
😂😂😂 I feel awful I didn't think of that. I really am slipping.
What did you do to the ac line? I have a 93 I’m SVO swapping and using the ranger accessory’s to keep AC but my line runs to the side b4 running forward where as yours runs forward and then turns. Talking about at the dryer hookup
Hm. I'll have to look a little closer. Maybe there was a split year or some option that made them different like dealer or factory installed AC. I run the original AC lines that I gave a little extra bend at the compressor
Send me your fb page/email and I’ll shoot u some pics!
@@drewsharpe7484 you can send to Instagram 2300gearjammer. I'll try to check that
Call me old but I don’t have instagram😂
@@drewsharpe7484 boooo haha well I probably wouldn't have checked it anyway 😂 try Facebook just recently posted this vid in the turboford group
LED light bulbs........
Is altezza still a thing?
Did somebody graffiti your shop? I see illumanati
Haha yeah the day before I bought it and left it there so the place looks abandoned. 😂
Hey, I have a 97 ranger and i want to put my 86 SVO engine in it. could you tell me what needs to be done for it to work?
97 is ob2 so it's a different setup. I haven't done that one yet so I'm not exactly sure what all is different.
So what ET had it ran before?
Current best ET was on HotRod Drag week and it 9.31 in the 1/8 and 15.21 in the 1/4. All with issues but it'll never not have issues 😂
@@2300gearjammer hell 9.31 is right there beside my road course CMC spec car in the 1/8🤣, ran 9.20 flat but the clutch wont liking that power shift to 2nd and 3rd at all and had to blip the throttle for it to grab lol
@@young11984 that's almost exactly what happened with mine except a stock clutch was shot. I was being eeeeasy on it to get there. 😂
@@2300gearjammer best one i had in my TC was one from Advance Auto, for the life of me i cant remember the name of it but was an aftermarket brand for an SVO 9-1/4”. After a couple hundred miles it gripped great, went to do a burnout in what i thought was first but was 3rd and cut the car off lol, fired it back up and bounced it off the limiter and the tires lit up then i realized it was 3rd lol.
Need to get my TC back out, got it down to an 8.70 at full weight been sitting for 10+yrs now
@@young11984 wow! A TC in the 8's is getting it done. Don't worry about that mess up, I've launch mine in 3rd gear before. Lol all my blk mustang burnouts are 3rd gear on purpose.
😂🤣😂🤣 that resurfacing job went really fast especially after you spent sooooo much time with the file making sure that it was true and super flat and you actually spent the time to put it back in the tool box. When I get finished with a tool it normally ends up directly below where I was using it on the ground or the sand until I need it again because I just drop it then bitch because I can't find it. Think your luck is bad Ive got a 347 that I built hanging on the hoist for the second time pulling it out due to the deck was cracked the first time I pulled it then put it back together wondered what happened to my 50 psi oil pressure so decided to prime up the system again and the oil pump was locked up 🤬🤬🤬🤬😭😭😭😭 so with a 7qt pan on a 347 in a 79 pinto that engine has to come out again because that pan isn't moving at all . But hopefully it will be the last time I have to pull it. That ranger is pretty cool and I can't wait to see what you squeeze out of it at the track, hopefully its not another freeze plug that gets squeezed out and vaporizes 🤣😂 I really can't wait to see what you get the pinto to run because they are super lightweight and if you get it to launch like the silver one on RUclips that had to peddle it to keep from going to fast then you will be squeezing out some 8s maybe in the 60ft 🤣😂🤣 nah the 1/4 . Im sure that you have seen the silver pinto that looks like it jumps on the launch. Sorry for the book I wrote but maybe you can get some $$$ out of it after you get it edited 😂🤣😂🤣 BYYYEEEE. 👊🔥
Hahaha well about setting a tool down thing... Watch again, I was running the belt sander and then walked away to go get that file and it was in my pocket the whole time 😂😂
@@2300gearjammer 🤣😂🤣😂 im bad about that as well, my pockets turn into mini toolboxes then I can't find that tool again until I go to clean my pockets out before I shower 🤣😂🤣
@@2300gearjammer im going to watch again and see cause I always miss little things like that 😜
@@79beans347 I cracked up but the reason I walked away really was to get the file. 😂
@@2300gearjammer 🤣😂🤣 that's too funny and this whole time I thought that I was the only one that did stuff like that 😂🤣 im the world's worst and when I do it i look around and see if anyone saw it then try to play it off 😂🤣😂 like I meant to do that, I knew that I had the flashlight in my hand shining it around looking for the stinking flashlight 🤣😂🤣😂😁🤘😎