Excellent video like usual, but one little detail about the replacement a new digitizer: you need a double adhesive foam tape to hold the LCD or else it will move around in the case. It just happened to me today after resassembling the whole thing.
I wonder what is the issue why this happens. Mine is always docked and rarely used. I was so surprised when i took it out to clean and saw the lines. It ruined my day because i never mishandled it, never dropped, not even a scratch.
will this fix a red/blue line on the LCD? it showed up one day and i'm not sure if it's because of the battery swelling or just the LCD somehow going bad. I don't remember it happening. it just showed up one day.
Excellent video, IPA is isopropyl alcohol? I have a big stain on the LCD screen, and my touch screen is very scratched, do you recommend I buy a specific LCD+ touch kit? I have seen many in ALiEX and even some say that they are improved versions
Changed mine but the screen is white. But when i touch the screen i can hear a clicking sound (means it is working) and I was able to play games when connect it to my monitor. Any idea what I missed after replacing the lcd?
Kak mau tanya lagi. Kenapa ya stlh update HATS+Firmware ga bs transfer file ke usb drive (flashdisk)? Bahkan cuma buka usb drive aja langsung error dan harus Reboot
Is it really necessary to open the motherboard? You can just disconnect the lcd cable and open the digitizer without opening the motherboard which is way more safe (?)
@@sthetixofficial I don't know the diode values it's yellow lighting into red and also my b point broke off the oled hwfly chip last night is there an alt point with a multimeter?
@@sthetixofficial is there an alt b point with a multimeter? I tried scratching near the point to expose the copper and solder idk if it worked I had a reading of 52.1
Can you do a tutorial on how to fix bricked 3ds that shows a blue screen after booting up the 3ds. This error is caused when the console has missing NAND Files.
Great Video. I have a question tho. Is it necesessary to remove the whole board? I can see that somewhere on the process it revealed the lcd cable already, I am scared to remove the whole board since I jb soldered switch.
@@hellopo5218ipa does not conduct electricity and overall evaporates easily. It may be the safest thşng to use on electronic devices. Make sure you use the highest percent ipa.
My lite got this and I was planning to buy a switch oled. Have you encountered anything on oled that is concerning like this one? Or should I buy oled?
Excellent video like usual, but one little detail about the replacement a new digitizer: you need a double adhesive foam tape to hold the LCD or else it will move around in the case. It just happened to me today after resassembling the whole thing.
Great tip!
Dang it!! Mine just went like this a few weeks ago. I never dropped my switch and woke up this happening
Merry xmas and a happy new year Sthetix
Merry christmas and happy holiday..
What would be some of the causes for these horizontal lines appearing would you say?
I don't know
Random i never dropped my switch and my whole screen has like black lines and ghosting of old pixles
That especific horizontal lines it's caused by the reflection of a very strong light for a long time at the screen. (for example, the sun light)
Nintendo use cheap parts
Best youtuber bro happy new year and cgrustmas
Happy holiday bro
@@sthetixofficial god bless u u deserve 1million sub thank you! I never skip adds
Thank you
I wonder what is the issue why this happens. Mine is always docked and rarely used. I was so surprised when i took it out to clean and saw the lines. It ruined my day because i never mishandled it, never dropped, not even a scratch.
it could be anything. random.
Overheat problem….my Switch still have no problem for about 3 years. I mostly played handheld mode.
Merry Christmas and happy new year sthetix 🥳!
Merry Christmas too bro
will this fix a red/blue line on the LCD?
it showed up one day and i'm not sure if it's because of the battery swelling or just the LCD somehow going bad. I don't remember it happening. it just showed up one day.
if it is not permanent, then dont worry about it. but if it is something like in this video, you need to replace it.
Hi Sthetix could you consider making a video on how to do a system transfer on a modded old 3ds to a new 3ds without losing save data
it is on odysee.com/@sthetixofficial:9
@@sthetixofficial thank you
First!
Love ya 😘
You're the BEST!!!
Greetings from Germany!
Excellent video, IPA is isopropyl alcohol? I have a big stain on the LCD screen, and my touch screen is very scratched, do you recommend I buy a specific LCD+ touch kit? I have seen many in ALiEX and even some say that they are improved versions
try replacing the screen protector. IPA is isopropyl alcohol
Awesome job thanks
you are welcome.
Changed mine but the screen is white. But when i touch the screen i can hear a clicking sound (means it is working) and I was able to play games when connect it to my monitor. Any idea what I missed after replacing the lcd?
you might have busted the LCD socket.
My switch is exactly like this on the video. Is it necessary to replace the LCD even though it is working fine? or will it get my switch worse?
of course not. don't fix anything if it is working
Kak mau tanya lagi. Kenapa ya stlh update HATS+Firmware ga bs transfer file ke usb drive (flashdisk)? Bahkan cuma buka usb drive aja langsung error dan harus Reboot
Is it really necessary to open the motherboard? You can just disconnect the lcd cable and open the digitizer without opening the motherboard which is way more safe (?)
of course. how can u remove the cable if u dont remove the board. you might end up bursting the lcd socket and the flexible cable itself
Amizing replace lcd.... 👀
thanks
Can you install an OLED screen into a V1 V2 switch?
No
@@sthetixofficial why?
The technology is different, the size is different and the socket (screen connector) is different.
So replacing the screen wont make you lose your save data?
it does not
Friend Nintendo switch depends on the touch screen to give an image on the screen? I want to test only the display before mounting
it does not
there seems to be a ribbon cable dangling on the touch screen, does that cable not inserted anywhere?
It is inserted to the game card slot bro
did you miss adding the internal adhesive between the digitisier and lcd?
no i didn't. if it is still sticky I don't need to use a new one
Many cases occur on the nintendo switch lite
I agree
Does it become worse if i dont fix it? @@sthetixofficial
Would you be able to fix my switch lite and switch oled with mod chips? I'm having a bit of trouble 😅 😬
what's the issue?
@@sthetixofficial I don't know the diode values it's yellow lighting into red and also my b point broke off the oled hwfly chip last night is there an alt point with a multimeter?
we can repair the B point on the modchip.
@@sthetixofficial is there an alt b point with a multimeter? I tried scratching near the point to expose the copper and solder idk if it worked I had a reading of 52.1
@@sthetixofficial so did you find the alt b point with a multimeter? Please 🙏
Hii, should I backup the files and data before replacing the screen or the data won't be deleted??
it doesnt matter because it doesnt affect the data at all
@@sthetixofficial thank you!!!
Can you do a tutorial on how to fix bricked 3ds that shows a blue screen after booting up the 3ds. This error is caused when the console has missing NAND Files.
you need to have the backup nand file to fix the issue
Great Video. I have a question tho. Is it necesessary to remove the whole board? I can see that somewhere on the process it revealed the lcd cable already, I am scared to remove the whole board since I jb soldered switch.
If my screen on my switch is cracked all I have to replace is top screen right?
yes
Is there a way to replace the lcd without removing the touchscreen?
yes on the switch lite. but not on the regular switch.
Will this horizontal lines also appear when you dock the switch to a tv?
no it doesnt
Yes it will. Mine was always docked and it still happened.
This literally happened to me...like rn
Other methods are heating the screen to open it. Isn't that safe?
if you are comfortable with heating, go ahead.
is it ok to use blower if I can't manage to remove the digitizer screen?
you can but you better use IPA, as it is far easier than using heat.
@@sthetixofficial will it damage the digitizer or not?
@@hellopo5218ipa does not conduct electricity and overall evaporates easily. It may be the safest thşng to use on electronic devices. Make sure you use the highest percent ipa.
Is the V1 Digitizer and the V2 Digitizer the same?
same
I DID THIS TO MY SWITCH AND NOW IT WONT TURN ON, DO YOU KNOW HOW TO FIX IT?
you need to inspect everything, maybe you broke something, like the LCD connector ,etc.
Are there any OLED replacements?
No. I haven't done it
can you replace the v2 with an OLED screen?
no
Where can I buy a replacement lcd? Thanks
It is on aliexpress.
اللهم صل و سلم على سيدنا محمد
ياربي انصر اخواننا بفلسطين
Cómo de ancha es la cinta adhesiva de doble cara?
about 5mm or thinner.
Can we upgrade screen to OLED?
No we cannot.
Pico and Switch, can you say something about that?
No.. It doesn't exist
Hats terbaru support 1.15.1 ga?
maksud nya 15.0.1 ? bisa
Does the oled have this problem?
I havent encountered / seen one on the OLED
My lite got this and I was planning to buy a switch oled. Have you encountered anything on oled that is concerning like this one? Or should I buy oled?
i had this now my screen is flickering im so sad 😭
You need to replace the screen.
support super thank you
Too hard... Bye-bye, Switch! 😅
First! 😁😁👍🏻👍🏻
Can I just remove the cartridge reader and not the whole board?
Cannot.
Pers
Me who sjt on switch lol