I don't make lines all day everyday so these are the same style that I use. But even to make all the lines on an entire vehicle they still aren't bad. They just work.
"It would have been just fine as long as he didn't steer!" Another classic Mr O brake line one-liner line. Thanks for the videos, Mr O. Stay safe out there.
I was replacing a brake line with Nicop and guy was bitching at me for using copper tubing on brakes!! I just looked at him and laughed! He ran right into the supervisors' office! Never heard about it again!
Must be the new Technician that graduated from a pretigous technical college. 😅😅 Got his degree a Technician attached to his diploma. With not a lick of common sense yet. Crying to the boss
Two things... drath, taxes and rust.... You gotta love his wry sense of humor... many times he is so subtle that i think half the people who watch these videos dont get it and the other third do!
That Imperial flare tool you use is the best. I am over 70 and I inherited mine. It still works perfectly. It is simple, fast, and screams hand-crafted!
Eric, you are the PRIME example of a mechanic with top notch skills, knowledge and experience. One who should be paid top dollar because of the aforementioned attributes. One who unfortunately will never get rich performing such duties. One thing that stands out even more is your ability to connect with your viewers on RUclips and convey what needs to be accomplished without being condescending. You are humble, humorous and a good family man. I enjoy my morning coffee with your latest vids. Thank you Sir
I agree with everything you had to say- except the part about never getting “rich!” “Rich” being in the eye of the beholder. We’d all be challenged to count the ways this talented, humble man is “RICH” and I’m sure you would agree, @richardramon2175.
Richard, I believe what you’re saying is so well meaning, and I believe your original comment was excellent! A lot of us might be reminded of the saying: If you love what you do- you’ll never work a day in your life. Of course neither of us can speak for Eric O and family, I feel from watching and seeing how good his videos are- he truly loves what he’s doing. He’s certainly works smarter- not harder (as you mentioned Richard, skills, knowledge and experience make that possible) to do all that he does, not the least of which is producing great videos. He’s still young, so I don’t believe he wants to quit work, I’m pretty sure he could- just believe South Main Auto, LLC is doing VERY well! Richard, you and I as well as nearly ONE MILLION subscribers hope he keeps “working” making more videos to add to the extensive SMA library! Richard I liked all of your complimentary comments regarding Eric O and SMA- well done! Obviously I’m also a huge SMA Fanatic- nice talking with you, Tony
Thank you Tony. I am going to be 62 next month and have only been working on my vehicles for about 2 1/2 years. In that time I have just about completely replaced the front suspension on my 03 Tacoma, replaced the radiator (my 1st repair) and done front disc brakes. I've changed all fluids from front to back. Darn truck got an evap leak and after spending $200, twice, at a supposed evap expert, I took it to my employer mechanic. The truck has been in the shop since last October and is there. After throwing the parts cannon at it, including a new charcoal cannister, vent valve, purge valve, another valve near the tank and a refurbished PCM, it is still there. I did plugs, new NGK wires and valve cover gaskets. Good thing I bought a used 2000 Grand Marquis that runs pretty well. I have replaced the right rear window regulator and motor and done brakes allaround. Done a break flush and inner and outer tie rods, idler arm and tried to do the pitman arm. Need to do the upper and lower ball joints both front. My health issues have been prevented me from completing the rest of the work. I really enjoy repairs. I have been lucky to find decent mechanics in my life. However, I have had my share of bad ones. This is why I try to do the work myself. This is why I have enjoyed Eric's channel. He and other RUclips channel mechanics have helped me tremendously. I am envious of his torch skills and realize I will never get to his level nor have I ever used one. Sorry for the long winded reply. Shows you my passion for working on cars.
@@richardramon2175 Wow! You’re welcome Richard! I started diy wrenching because of this channel in particular and a few others in general. Going on 64, recently retired. I have a ‘99 Jeep XJ, a ‘04 Jeep WJ (the one in this video) ‘08 Buick Lecrosse (3800 set 3) and ‘14 Chrysler T&C. I’ve done a ton of work on all of them- rewarding. I try to follow advice from Eric O on tools such as the comparison between 3 different brake flaring kits in this video. It’s been a fun learning experience!
I'm 66, born in 1957, I had good mechanics all my life, because I know what a good mechanic is. Sad that some customers today do not understand what a GOOD Mechanic is, & Embarrass themselves & insult the GOOD Mechanic they already have, MAYBE this customer just learned a good lesson ABOUT knowing you already have the best.
I'm 69. I'm a DYI mechanic not a Technician. I've done my own work on my vehicles. I don't get to complain to anyone about bad work. I look at the mirror and see him every day. 😅 I enjoyed my work as a DYI mechanic. I help my neighbor out when he calls. I don't call myself A glorified Master Technician mechanic with ASE rating either. I found out ASE ratings is just taking classes and passing test.
Cutting just the outer pipe with the gas axe was the first thing I got taught when I started working in the industry. Still remember who taught me (Bo Eriksson) and the total length of the lesson: "Just start cutting without preheating and it'll never touch the inner, like this *ziip-ziip*" About twelve seconds, including everything. 36 years on, I have still to hurt a single inner as long as it had more structural integrity than your ordinary spider web. Best method ever.
Another satisfied customer! I almost always cut exhaust pipes with the torch. When doing the second step of the double flare an old mechanic told me way back when, not to reef down on the flare tool and let the nut finish it off when you tighten it. I like your tube bender pliers! Enjoyed watching!
Is it a sign that you’ve been watching SMA to much of when Eric says “A Dorman fender washer”, I said to myself, “Not a sponsor”? Did it yesterday too when I got my box of Dorman wheel nuts in the mail…
I agree with all my knowledgeable followers. His father gave him the skills to feel confident to use a torch. It's an art. Eric can cut a bearing race and not damage the spindle. I wish I could do that. One day?
That muffler rocking brought memories of university. 4 story residence, central stairway. Someone would start a manhole cover spinning on edge on the basement floor at stairwell. During quiet hours, of course.
13:11 Eric “There’s not much to show, I shouldn’t probably even film it”. I’d still watch even if you just filmed the back of your head for the whole video. I come here for the worldly wisdom, comedy one liners, ol’ Vic, Mrs. O, and maybe I’ll even learn something about cars along the way.👍👍
Since you only said it twice , I think the Eastwood Line Flaring Tool and the Mastercool Hydraulic Flaring Tool are better. If you had said it 3 times, then I would have agreed with you. 😜
@@jamesbergfeld5923probably the same number of times putting an electrical connector and housing on in the wrong order. usually happens when you have no spare pins either. :D
I'm glad you stressed the O2 problems with older Chryslers. Probably 3 years ago I ran into the random falling on it's face when going into closed loop problem on my grandparents 98 Ram. Then compounded the problem by putting Bosch O2 sensors in it. ScannerDanner was able to point me in the right direction and sent me a link to a video he had done with the same problems. I went to a friend of mine at the Chrysler parts counter to get the OE sensors and she told me she buys NTK for their techs on the older ones that are unavailable. I also use the old flare nuts if they are in good shape. You don't have to worry about them being the correct threads.
Your skill level is amazing. Your knowledge and diagnosis are easily followed and you explain things very well. You'd have been a great teacher, you are a great teacher. "PROFESSOR O"
I agree on the flare tools. My dad was a mechanic for 48yrs and for as long as I can remember watching him work he used that same tool as have I for the last 15. The same one he used
There’s a reason those lines are run like that as You run them like the Factory does Beautifully Done . It does take longer but No come Backes . So Worth it to Take Your Time !!!! Great job !!!!
@@leftyo9589 I gotta up my tool game... I don't even have a sawzall yet😵💫 I'm cutting stuff out with a Dremel (100 pack cutoff wheels) and a manual hacksaw for bigger jobs
12:33 ! FANTASTIC way to add emphasis to the lesson. Could not have been better if you tried. Also thanks for the lesson there. Glad I have your type countryside around me, but 85% less rust. But we have hot and mosquitos for 5 months or more.
There is an Eastwood store thirty minutes from me in New Jersey, it’s a great place to go and easy to part with lots of money! Some many goodies there.
I would like to thank you for sharing your electrical trouble shooting skills. It encourage me to resolve my no power issue on my boat radio. Thank You SMA
Great video Eric! Love how you use the right tools all the time. Mrs. O is a hoot too. This two part fix had it all, thank you, thank you, oh yeah,thanks Buddy
Ah, the old Down Up Down Up bleed routine. I remember way way back when we pumped the bejeebus out of them. And NOTHING tastes much like brake fluid---but it's not as bad as is smells.
Actually EO, the brake line repair is the most interesting. I always want to know what the jethro method was by the previous repair. And, "half the cost of the muffler shop" is funny.
Really interesting videos, but also the interaction between you and your lovely wife makes a great addition to your videos, a family affair. More power to your elbow!
Wow thats so awesome how he always takes the customers budget into consideration, any other mechanic would prolly have them replace the whole exhaust system just to make a larger profit..
Anybody that has watched the channel for awhile knows Eric is a surgeon with the torch! Nice repair all around Sir!
That is true. That's quite a skill! 👍
Torch has always scared the crap out of me. I wish I had the skills.
Master surgeon
you can guarantee he wasnt born with the skill, he wrecked some stuff along the way to get good with it.@@coache1nine
@@leftyo9589absolutely!!!
Eric: "It would have been fine as long as he didn't steer." 🤣
Or brake.
@@ericpaul4575 lol
It’s always better when you repeat it. 😂😂😂
Who needs steering or brakes anyways? 😂
Love the muffler toss and how he just watched it roll around with us, had me laughing.
Watchin that was just riveting!
"And that's why the torch is better." Mic dropped.
Wow, and Mrs. O with the headslap "what is it, your first day"? She's a hoot!!!
The flair tool you used is what most of us DIY people can afford, so seeing how ,helps us more than the pricy tools- thank you Eric!!
I run to the parts store and get the free rental 😅
I remember just having the piece that holds the pipe & using a ball pane hammer to make flares on pipes.(still got one).
I don't make lines all day everyday so these are the same style that I use. But even to make all the lines on an entire vehicle they still aren't bad. They just work.
Explanation of why Vic is better than sawseverything, with muffler roll is an alltime SMA classic😂 I'll be laughing all day.
Muffler was like, “I must go, my people need me!”
"It would have been just fine as long as he didn't steer!" Another classic Mr O brake line one-liner line. Thanks for the videos, Mr O. Stay safe out there.
"what is this your first day?" Mrs O throwing some shade
I was replacing a brake line with Nicop and guy was bitching at me for using copper tubing on brakes!! I just looked at him and laughed! He ran right into the supervisors' office! Never heard about it again!
Must be the new Technician that graduated from a pretigous technical college. 😅😅
Got his degree a Technician attached to his diploma. With not a lick of common sense yet. Crying to the boss
I believe that my old Volvo has a Nicop type of brake line from the factory. Still mint 30 years later even in salty Wisconsin.
@@2nickles647Sounds like a 2 year man...(They know it all!!!)
"Would have been fine if you didn't steer", Eric O. Your quotes are great!! Keep them coming.
Two things... drath, taxes and rust.... You gotta love his wry sense of humor... many times he is so subtle that i think half the people who watch these videos dont get it and the other third do!
Nice job with the torch Eric O. This isn't his first rodeo folks. He knows what he's doing.
That Imperial flare tool you use is the best. I am over 70 and I inherited mine. It still works perfectly. It is simple, fast, and screams hand-crafted!
"Death taxes and rust", Thanks Eric. I needed something to brighten my Friday morning.
That muffler toss felt personal
Anytime you break old Vic out you know it's a good day.
Eric, you are the PRIME example of a mechanic with top notch skills, knowledge and experience. One who should be paid top dollar because of the aforementioned attributes. One who unfortunately will never get rich performing such duties.
One thing that stands out even more is your ability to connect with your viewers on RUclips and convey what needs to be accomplished without being condescending.
You are humble, humorous and a good family man. I enjoy my morning coffee with your latest vids.
Thank you Sir
I agree with everything you had to say- except the part about never getting “rich!” “Rich” being in the eye of the beholder. We’d all be challenged to count the ways this talented, humble man is “RICH” and I’m sure you would agree, @richardramon2175.
@@YOUZTUBE2000 I stand corrected. My idea of 'rich' is being able to quit working. I'm sure he would love to be able to.
Richard, I believe what you’re saying is so well meaning, and I believe your original comment was excellent! A lot of us might be reminded of the saying: If you love what you do- you’ll never work a day in your life. Of course neither of us can speak for Eric O and family, I feel from watching and seeing how good his videos are- he truly loves what he’s doing. He’s certainly works smarter- not harder (as you mentioned Richard, skills, knowledge and experience make that possible) to do all that he does, not the least of which is producing great videos. He’s still young, so I don’t believe he wants to quit work, I’m pretty sure he could- just believe South Main Auto, LLC is doing VERY well! Richard, you and I as well as nearly ONE MILLION subscribers hope he keeps “working” making more videos to add to the extensive SMA library! Richard I liked all of your complimentary comments regarding Eric O and SMA- well done! Obviously I’m also a huge SMA Fanatic- nice talking with you, Tony
Thank you Tony. I am going to be 62 next month and have only been working on my vehicles for about 2 1/2 years. In that time I have just about completely replaced the front suspension on my 03 Tacoma, replaced the radiator (my 1st repair) and done front disc brakes. I've changed all fluids from front to back. Darn truck got an evap leak and after spending $200, twice, at a supposed evap expert, I took it to my employer mechanic. The truck has been in the shop since last October and is there. After throwing the parts cannon at it, including a new charcoal cannister, vent valve, purge valve, another valve near the tank and a refurbished PCM, it is still there. I did plugs, new NGK wires and valve cover gaskets.
Good thing I bought a used 2000 Grand Marquis that runs pretty well. I have replaced the right rear window regulator and motor and done brakes allaround. Done a break flush and inner and outer tie rods, idler arm and tried to do the pitman arm. Need to do the upper and lower ball joints both front. My health issues have been prevented me from completing the rest of the work. I really enjoy repairs.
I have been lucky to find decent mechanics in my life. However, I have had my share of bad ones. This is why I try to do the work myself.
This is why I have enjoyed Eric's channel. He and other RUclips channel mechanics have helped me tremendously. I am envious of his torch skills and realize I will never get to his level nor have I ever used one.
Sorry for the long winded reply. Shows you my passion for working on cars.
@@richardramon2175 Wow! You’re welcome Richard! I started diy wrenching because of this channel in particular and a few others in general. Going on 64, recently retired. I have a ‘99 Jeep XJ, a ‘04 Jeep WJ (the one in this video) ‘08 Buick Lecrosse (3800 set 3) and ‘14 Chrysler T&C. I’ve done a ton of work on all of them- rewarding. I try to follow advice from Eric O on tools such as the comparison between 3 different brake flaring kits in this video. It’s been a fun learning experience!
The toss of the old muffler was probably the best thing I've ever seen on this channel! ...#$%# your saw zaw. lol.
"Death, Taxes and Rust", you sir are the definition of wisdom.
Half the fun is listening to Eric anticipate the wise acres.
The smell of burning salty steel. A new concept for me. Wish SMA had Odorama.
I'm 66, born in 1957, I had good mechanics all my life, because I know what a good mechanic is. Sad that some customers today do not understand what a GOOD Mechanic is, & Embarrass themselves & insult the GOOD Mechanic they already have, MAYBE this customer just learned a good lesson ABOUT knowing you already have the best.
I saw as he was cutting the exhaust, he quickly checks his beard , to put the Fire Out on his face 🤣
I'm 69. I'm a DYI mechanic not a Technician.
I've done my own work on my vehicles. I don't get to complain to anyone about bad work.
I look at the mirror and see him every day. 😅
I enjoyed my work as a DYI mechanic.
I help my neighbor out when he calls.
I don't call myself A glorified Master Technician mechanic with ASE rating either.
I found out ASE ratings is just taking classes and passing test.
love the good old-fashioned replacing old broken parts with nice shiny new ones that work. very relaxing to watch sooths my soul LOL
Heat shield fasteners ("washer") = cut the bottom off an aluminum pop/soda/beer can. Youre a legend Mr. O.
Stay gold.
Cutting just the outer pipe with the gas axe was the first thing I got taught when I started working in the industry. Still remember who taught me (Bo Eriksson) and the total length of the lesson: "Just start cutting without preheating and it'll never touch the inner, like this *ziip-ziip*"
About twelve seconds, including everything.
36 years on, I have still to hurt a single inner as long as it had more structural integrity than your ordinary spider web. Best method ever.
Any mechanic working in the PRNYS is in love with their torch, Eric is just particularly adept with public displays of affection.
I don’t have a saws all.
Brake lines just don’t fair well in NYS.
"This your first day?"
Mrs. O evidently believes that slack is something you always take up, never let out.😆
Another satisfied customer! I almost always cut exhaust pipes with the torch. When doing the second step of the double flare an old mechanic told me way back when, not to reef down on the flare tool and let the nut finish it off when you tighten it. I like your tube bender pliers! Enjoyed watching!
Is it a sign that you’ve been watching SMA to much of when Eric says “A Dorman fender washer”, I said to myself, “Not a sponsor”? Did it yesterday too when I got my box of Dorman wheel nuts in the mail…
Less than one minute in and Vic comes out. Going to be a good day. LOL
Don't know if Mr O intended the comedy element, but it had me giggling so much i had to hit pause. Plus a 2 part Jeep rebuild! What a deal.
It's almost Spring time this must excite you, because this means the Ice Cream shop will be opening soon. 🤣🤣
I agree with all my knowledgeable followers. His father gave him the skills to feel confident to use a torch. It's an art. Eric can cut a bearing race and not damage the spindle. I wish I could do that. One day?
Muffler drop instead of a mic drop. Excellent!
loud talk a man that can take a torch and burn a nut off a bolt and never ruin the bolt threads !!C'MON MAN !!!
Like norm norm from this old house. Cant you drill a square hole?
That muffler rocking brought memories of university. 4 story residence, central stairway. Someone would start a manhole cover spinning on edge on the basement floor at stairwell. During quiet hours, of course.
Hilarious! It’s all fun and games- until someone snaps! 😅😮😢
Man that country side view around SMA is beautiful
Gotta love that NiCop brake line. Easier to bend and flare, not to mention the anti-corrosion properties.
13:11 Eric “There’s not much to show, I shouldn’t probably even film it”. I’d still watch even if you just filmed the back of your head for the whole video. I come here for the worldly wisdom, comedy one liners, ol’ Vic, Mrs. O, and maybe I’ll even learn something about cars along the way.👍👍
I agree, this channel checks so many boxes!!!
Mrs O. enters the room, Eric O. immediately reverts to rookie mode 🤣
Best wrench on RUclips.
The first day when everyone is watching is always the roughest! 😬 Great job!
Happy Friday, Mr. O and Mrs. O watching video while on the boat to the vineyard
Always love to watch the SMOKE WRENCH in use! One of mankinds geatest discoveries.
Anyone who has ever done exhaust work for a living knows the oxy/acetylene torch is the best tool in the shop and can be used in hundreds of ways.
Glad to hear your sense of smell is coming back.
Since you only said it twice , I think the Eastwood Line Flaring Tool and the Mastercool Hydraulic Flaring Tool are better. If you had said it 3 times, then I would have agreed with you. 😜
They are great tools honestly 😅
How many times have you flared the brake line and forgot to install the fitting?
@@jamesbergfeld5923probably the same number of times putting an electrical connector and housing on in the wrong order. usually happens when you have no spare pins either. :D
I'm glad you stressed the O2 problems with older Chryslers. Probably 3 years ago I ran into the random falling on it's face when going into closed loop problem on my grandparents 98 Ram. Then compounded the problem by putting Bosch O2 sensors in it. ScannerDanner was able to point me in the right direction and sent me a link to a video he had done with the same problems. I went to a friend of mine at the Chrysler parts counter to get the OE sensors and she told me she buys NTK for their techs on the older ones that are unavailable. I also use the old flare nuts if they are in good shape. You don't have to worry about them being the correct threads.
Loved you leaving in the full muffler dropping and rolling away, classic real like stuff there.
I bet the muffler shop wouldn’t put on the fender washers or trim off muffler clamp bolts.
Your skill level is amazing. Your knowledge and diagnosis are easily followed and you explain things very well. You'd have been a great teacher, you are a great teacher. "PROFESSOR O"
I saw Buckethead a few years back. Great show! I didn't know there were nuts named after him...
Full Eric snark engaged, love it!
I think he has more- I wish he would totally unleash his inner snarkiness on the trolls.😂
He does a good enough job of it, without sending them into full hyper-troll-psychosis! Sometimes better to let a sleeping dog lie!!!😂😂😍
Those washers are how I did it on my Jeep too, Eric O for the WIN!
Only a torch expert can use their pointer finger for oxygen use during torch control. Nice!
You know what they say-if you’re gonna get a fender washer make sure it’s a Dorman!
I agree on the flare tools. My dad was a mechanic for 48yrs and for as long as I can remember watching him work he used that same tool as have I for the last 15. The same one he used
12:34 Loving Eric's "mic-drop" moment👍🎤
Keep doing things your way and others have the right to do their things their way. I watch and like your work and videos.
There’s a reason those lines are run like that as You run them like the Factory does Beautifully Done . It does take longer but No come Backes . So Worth it to Take Your Time !!!! Great job !!!!
Now heres why my sawzall is better than my torch.
I dont have a torch.
Plus that was a good Eric O explanation for why the torch may not be a good option in that case with a different metal pipe... But, use what you have👍
also for most of us laying on our back under a car, hot torch slag in your eye really sucks. at such times the saw is a good choice.
@@leftyo9589 I gotta up my tool game... I don't even have a sawzall yet😵💫
I'm cutting stuff out with a Dremel (100 pack cutoff wheels)
and a manual hacksaw for bigger jobs
Muffler throw was epic
12:33 !
FANTASTIC way to add emphasis to the lesson. Could not have been better if you tried.
Also thanks for the lesson there. Glad I have your type countryside around me, but 85% less rust. But we have hot and mosquitos for 5 months or more.
Made me laugh when you were walking to the back to cut the tailpipe loose bumping the air lever on "Victor". I used to do the same thing. 😂
Another fine job you did for us to see Mr O! Would I expect Less? Nope!
There is an Eastwood store thirty minutes from me in New Jersey, it’s a great place to go and easy to part with lots of money! Some many goodies there.
Another fine job Eric…just love watching your stuff 👍🏴
I like the brake line bending pliers, so nice for those small spaces. Good video!
A master with the torch….love your content and Mrs O
I still have my dad’s Snap-On brake line flaring tool. Circa 1974. Similar design to the one you’re using. Still works great!
Another fine fix!
Thanks for the torch explanation, it made sense why you did what you did. Experience tells all.
I would like to thank you for sharing your electrical trouble shooting skills. It encourage me to resolve my no power issue on my boat radio. Thank You SMA
Great video Eric! Love how you use the right tools all the time. Mrs. O is a hoot too. This two part fix had it all, thank you, thank you, oh yeah,thanks Buddy
Great job as always! Yeah - I like the old Imperial flaring tools also. Simplicity is good.
That was a great muffler drop, rollin and rockin, reminds me of my old mother in law...lol! Thanks for the content, love from AZ ❤
😅
Muffler roll, nice
Gotta have the correct tools for the job!! And you got em all!! Great job and video!!
100% with ya Mr O on the cold O2 pull. I once used some dry ice to get a stuck O2 sensor out.
40:25 😅 entertainment banter before the Mrs O burn, "what is this, your first day?" 😅
It's been my experience, when burning, that white residue means galvanize. Always use band clamps (or not) :D
Mrs O is getting into the theam of video production! First day! Rookie!! LoL 🤣😆
Appreciate the content. Your videos make my job much smoother. Keep em coming.
hope you're teaching mccoy to use the torch, very handy tool to use correctly
Thanks for the video Eric, hope you and the family have a great weekend! Also just a reminder, it's nearly springtime, no more wet neck or armpits!
Except when it rains... 🤣
Outstanding. I wish you guys were in my neighborhood. Having the same issue. I'm sure you would knock out the issue. Great video.
Nice torch work. But I learned from a muffler shop that using a Sawzall is quicker and safer, No need to worry about catching something on fire.
Andy is a Master Tool
Ah, the old Down Up Down Up bleed routine. I remember way way back when we pumped the bejeebus out of them.
And NOTHING tastes much like brake fluid---but it's not as bad as is smells.
Fastenal makes some huge thin flat washers that work perfectly for rotted out heat shields.
Another good video thank you
Actually EO, the brake line repair is the most interesting. I always want to know what the jethro method was by the previous repair. And, "half the cost of the muffler shop" is funny.
It starts with a torch and a BFH, this gonna be good.
Great repair. Only thing missing is a piece of silver tape over the bonnett, ehem, hood and she'll be good as new.
“The man, the mechanic, with his torch and tools .. rules over the beast.
Remember Midas the Muffler King?
Really interesting videos, but also the interaction between you and your lovely wife makes a great addition to your videos, a family affair. More power to your elbow!
Lota work on this one but very successful.
Good one Mr. O.
Wow thats so awesome how he always takes the customers budget into consideration, any other mechanic would prolly have them replace the whole exhaust system just to make a larger profit..
I agree whole heartedly, fire wrenches are the best.
Eric O is on fire today. There are two things, and names three.
I thought I was the only one who noticed that! Glad you spoke up. 😂
Everyone noticed it! He was definitely on fire!,,😂😂😂😂😂