If your not in need of money I would keep motor etc and part out the roller save a lot of space and have and extra motor ready for another build in the future
Qué hay, soy de Mexico, reparo motos y tengo motos de cross y siempre que veo tus videos y las restauraciones me motivo con mis motos a dejarlas igual que las tuyas… mucha suerte y gracias por ser una inspiración ✌🏼👌🏻🏍️
And the work is done. Clint is a rare guy that literally LOVES the build as much as the ride. And so that hill has been climbed, time to climb the next one.
Bro, I know the feeling. I'm a hobby gunsmith and I hate... HATE to sell my projects. You never do get what you put into them back, but in order to clear room in the safe and get a new project, unfortunately they have to go sometimes. Looking forward to videos of whatever you get next.
Sooo sick love what you do all your insight as well!! But pleaseeeeeeee tell me what happened to kx500 mortard that was in kxf250 frame which had street title project went cold??????? Did someone buy it???????????? Been looking everywhere!!!!! Suspense has been killing be for years!!!! Keep killing it brother you are the man!!!
Way back when I was a Youngster we just called it a pipe despite the fact it WAS technically an Expansion Chamber, and I have in the past heard it referred to as a Header...
I usually call it a pipe. But to each their own brotha. I feel if you’re very connected to the bike don’t sell it unless you get an offer that will make you sell it. Maybe put a few bikes for sale and take what ever offer makes the most sense. Money has to be moved around sometimes and now is not a bad time to sell at all.
I hoard cars late 80 early 90s rear drive Nissans ,ill sell one if i can find a better one thats cheaper which after covid and covid tax and JDM tax a few of my cars were worth another 20 k over nite basically , lol blood sweat and tears then you build memories with it ,and iv got a killer KDX200 and 98 CR250 here in new zealand
usually when I feel conflicted I step away and decide to do nothing to not regret a bad decision. personally I'd keep that bike and sell one of the Kawasaki's or Suzuki s
How often do you need to replace the top end on the 325 im thinking of doing it to my 94 wr 250 I've basically done every other mod and I really like the bike and would like a little more power also i really only ride single track woods and desert is it gonna still be able to lug hills and climb at low speed and rpms without overheating the older 2t wrs are the best bikes for the riding i do i also have a 91 wr 25o if it is a good fit i would like to do that one too the only bikes that do what I like now days are the ktm group and i don't really want to go that route
I'd keep it and find someone to race it at the 2-stroke national. There are plenty of other newer 4-stroke bikes you could buy blown up and flip. You have too much into that bike to get rid of it.
Dude that is so sweet. But if I had to be nit picky, as a fellow yz250 rider, I can't stand the tusk blue rear disc gaurd. It just clashes so much. I don't understand why they can't just make a black one.... same with their wheels too... cmon rocky mtn
Been watching you for a long time at least 3-4 years now and I really think you need to start doing raffles with the bike so you make a lot of money off the bike but also give someone an opportunity to get a rad bike for cheap. But I do really think you need to start getting rid of quite a few of your bikes as you can’t ride them all at once and the budget aswell.
Nononoononononoooo!!! Don’t sell that bike. Do an off-road build with lights, wide ratio box, flywheel weight, 18” rear wheel. I know it’s not your style but hey, just a suggestion. I love mx bikes but own YZ-X and EXC style bikes.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Fantastic build! keep two strokes going!!!
If your not in need of money I would keep motor etc and part out the roller save a lot of space and have and extra motor ready for another build in the future
Qué hay, soy de Mexico, reparo motos y tengo motos de cross y siempre que veo tus videos y las restauraciones me motivo con mis motos a dejarlas igual que las tuyas… mucha suerte y gracias por ser una inspiración ✌🏼👌🏻🏍️
bike looks rad! cant ever go wrong with a Y Zinger
LOVE what you do Clint! From My Bikes too Lit to now...You're awesome. Can we get a ride day with you, Adam & Tyler?
Do what you gotta do. It was great to watch the build!👍
Of all the bikes why sell that one...I can't figure that one out
Cause it’s probably worth the most
And probably the best functionality wise which would make it an easier sell. Not a lot of guys want to buy a hybrid
And the work is done. Clint is a rare guy that literally LOVES the build as much as the ride. And so that hill has been climbed, time to climb the next one.
the one with the most popularity tend to sell the fastest
Bro, I know the feeling. I'm a hobby gunsmith and I hate... HATE to sell my projects. You never do get what you put into them back, but in order to clear room in the safe and get a new project, unfortunately they have to go sometimes. Looking forward to videos of whatever you get next.
YZ325 is everything that Lund MX is about. It's like a mascot now. Can't get rid of it
You do such a great job. Love all your videos. I want a bike so so bad. Been a dream to ride do some enduro/motocross. Thank you for the great videos
Not gonna lie I dig the Blue plastic! Looks super fresh and screams Yamaha!
This bike deserves way more video content before it’s potentially sold
Great job and great show as always
Clint love what your doing. Keep at it. 💯🏁👍
Don’t get me wrong I loved the bike you made with the clear plastics but damn that blue looks way better haha
love your videos always great builds coming from you
New plastics is alway fun. Nice job.
Keep it!!!! What a weapon!!!💪 From your friend down under 🇦🇺,love this channel keep the videos coming ✌
The thing coming out of the front of the motor I thinks it's called the Kitchen sink 5000 engine 2smoke portal
Sooo sick love what you do all your insight as well!! But pleaseeeeeeee tell me what happened to kx500 mortard that was in kxf250 frame which had street title project went cold??????? Did someone buy it???????????? Been looking everywhere!!!!! Suspense has been killing be for years!!!! Keep killing it brother you are the man!!!
Kx500 MOTARD!!!!!!!!!! Dm me if there’s something you don t want known about it I been looking so long and can t find it!!!
Way back when I was a Youngster we just called it a pipe despite the fact it WAS technically an Expansion Chamber, and I have in the past heard it referred to as a Header...
Damn bro that’s one of the best big bore bikes I’ve seen on RUclips 👍🤙
I usually call it a pipe. But to each their own brotha.
I feel if you’re very connected to the bike don’t sell it unless you get an offer that will make you sell it.
Maybe put a few bikes for sale and take what ever offer makes the most sense. Money has to be moved around sometimes and now is not a bad time to sell at all.
I hoard cars late 80 early 90s rear drive Nissans ,ill sell one if i can find a better one thats cheaper which after covid and covid tax and JDM tax a few of my cars were worth another 20 k over nite basically , lol blood sweat and tears then you build memories with it ,and iv got a killer KDX200 and 98 CR250 here in new zealand
I just saw this episode 😢a year old.. shot in the dark.. do u still have the 325?
Keep the 325. It's too cool to lose. I am sure Team Galfer or Rocky Mountain would like a show bike in the office.
If you sell it, please do it to turn the next YZ into a BRC 500!
That’s awesome mate what fuel ratio are you running in it and what is a good oil to run as well To mix with gas
Amsoil dominator 40 to 1 for racing 50 to 1 trail riding
Should do a give away with it 😊. Make it semi world wide too (Australia) 🤷🤷
I need to know how you restyled that 01
Sounds fantastic 👌
Thought you were going to race it?
Can’t wait til I win this 0508 crf. Things gonna ripppp
Lund, do you have any episode where you give your opinion of the 2006 RM 250 ? Thank you!
How do I enter for that fresh lid? I need that hat!
usually when I feel conflicted I step away and decide to do nothing to not regret a bad decision. personally I'd keep that bike and sell one of the Kawasaki's or Suzuki s
How often do you need to replace the top end on the 325 im thinking of doing it to my 94 wr 250 I've basically done every other mod and I really like the bike and would like a little more power also i really only ride single track woods and desert is it gonna still be able to lug hills and climb at low speed and rpms without overheating the older 2t wrs are the best bikes for the riding i do i also have a 91 wr 25o if it is a good fit i would like to do that one too the only bikes that do what I like now days are the ktm group and i don't really want to go that route
Still clean!
I've noticed ESR is offering a 85.5mm Bore piston kit which makes a 396cc out or the YZ250 two-stroke. Does anybody have any experience with this kit.
New intro is funny I love Napoleon Dynamite
You need to do a merch sell give away in this bike, I know I would buy some stuff, hat t-shirt or what not
Yz325? Realy😯
I'd keep it and find someone to race it at the 2-stroke national. There are plenty of other newer 4-stroke bikes you could buy blown up and flip. You have too much into that bike to get rid of it.
how badly does this vibrate? It just seems like it would rattle your fillings out
Dude that is so sweet. But if I had to be nit picky, as a fellow yz250 rider, I can't stand the tusk blue rear disc gaurd. It just clashes so much. I don't understand why they can't just make a black one.... same with their wheels too... cmon rocky mtn
are cylinder heads worth getting for a stock yz250? and which ones do people prefer ?
I think he uses phathead racing head which gives it more compression and stuff
How much tq does the yz have
awesome video
Keep it Clint!
Awsome videos my guy keep it up💪🏽🫡
Keep it man💯🤙🏼sicest bike
Always thought expansion chamber just described part of front pipe/header if your American
What’s your location?
How much?
why is it that youtubers always sell their yzingers?
Y don't u get a shop 🙄
Camera always looks like the lends is dusty 🙄
I love 2 strokes to. but i hate 4 strokes. they suck at fixing. I can rebuild a 2 stroke engine to I'm 52 been riding since 82 all 2 strokes
Expansion chamber
Yo!
Been watching you for a long time at least 3-4 years now and I really think you need to start doing raffles with the bike so you make a lot of money off the bike but also give someone an opportunity to get a rad bike for cheap. But I do really think you need to start getting rid of quite a few of your bikes as you can’t ride them all at once and the budget aswell.
Nononoononononoooo!!! Don’t sell that bike. Do an off-road build with lights, wide ratio box, flywheel weight, 18” rear wheel. I know it’s not your style but hey, just a suggestion. I love mx bikes but own YZ-X and EXC style bikes.
why not a YZ490 ?
Save all 2 strokes
Here brah
I wish more people would be realistic and know they won’t get all the money back they invest in a bike when you sell it
maico 700
Wrote DM you like 2 yr ago also dm u again 3 months ago still no Response lol 😂😂
Sale a Honda or kawasaki, not the yz325. Its the sweetest one of you fleet!
❤️🔥❤️🔥❤️🔥
Yessssssssss
Be good with fi
No don't sell it💯💯💯💯💯💯💯💯
What if you gave this bike away and sold the Honda? This video made me want a 2 smoker.
2 smoked 2 strokes
sweet will do
Pipe 😂