Lighting A Wood Burning Stove
HTML-код
- Опубликовано: 13 мар 2018
- In this video we will answer many questions that our team at ecofiresandstoves.co.uk/ are asked every day when it comes to lighting a wood burning stove.
Like:
Can I use paper instead of firelighters?
What's the best type of wood to burn?
How do I know when my wood burner is up to temperature?
Should I clean the grate before using the wood burner?
Pete Hillier is a director of ecofiresandstoves.co.uk/ He has been in the business for over 20 years and has a wealth of experience. 
Хобби
Brilliant videos ! thanks for the invaluable tips, absolutely great!
we had a wood burner installed 5 years ago, cost a fortune to buy and have installed because we wanted to see the flames of a real fire (we have central heating so we didn't really need it) we only used the wood burner for a couple of weeks because the glass kept going black and we got fed up with cleaning it every day. We've just started using it again and we knew about the Jenga kindling set-up but the things I didn't know until I saw your videos......
1) I kept cleaning out the ash every day
2) the wood was probably too high in moisture ( i have a moisture meter now) and probably soft wood too.
3) I turned down the air flow too soon after lighting ( basically once there was flames i turned down)
4) leaving the door open slightly to get the kindling going
As you say I probably wasn't listening but we don't remember being told about getting the burner up to temperature so the air wash works properly, our log burner also has side view glass but I don't think the air wash works verv well at the sides.
When you say "up to temperature" what temperature would he flue thermometer be? and where I would get one? I love the idea of your very long matches
Finally I would strongly recommended natural fire lighters they produce hardly any smoke and get the kindling burning quickly.
Once again many thanks
Geoff, Broadstairs, Kent
My husband and I moved into our cottage rental in June. Over the past month we have had to start the wood stove. We have been slowly figuring out starting a fire which has been okay; however, today we came upon your video. Well “thank you “ does not express how all your tips have helped. Simple explanations maybe but to the new people learning like us a really huge difference. Since watching it yesterday we have followed your tips about warming stove/starting stove and oh my goodness the difference is Crazy Awesome!! No more smoke coming back into room and the way it starts is unbelievable. Thanks so very much!!!
Having a wood burning stove fitted on Tuesday and have been watching all your videos thank you for your insight I feel well clued up now and confident that I know what I’m doing
I also have the Heta 45. Awesome stove and an awesome video. Thank you for the information. 👍
Great video. Well explained. Thank you for sharing.
The upside down lighting technique works for me, it warms the flue first plus I find I don’t need to open the door for the best part of an hour.
Thank you so much for this very clear to understand well explained video. So much information and not rushed. I have noticed with the fireplace in my rented house struggles to keep going and just smoulder and fills my house with smoke after I clean out most of the ash. I couldn't understand why until now. So now I won't be emptying all of the ash. It just never made sense to me. When every other video in most says clean most if not all of the ash. Thank you kindly.
So useful! Thank you.
Very good knowledge based information. Thank you much!
Brilliant video, many thanks.
Thank you for the video, very informative
Thanks for this
Excellent video learned alot 👍
Enjoyed the video
I'm completely new with the woodburning stove as it was only installed 3 days ago. First day I was taking it very easy and just playing with lighting etc (no wood ash obviously either down below. Today I think I did a whole lot better but possible reduced the air flow a little too much. I went out with it damped down for a few hours and found it still alight and managed to get it too rekindle. The glass was blackish and now I've build it up a bit, along with the confidence. Do you think the glass will clean itself? Its a Burley Brampton. Thanking you for your instructive video lessons.
I wish i could get the stoves you guys have over there, Australia doesnt have much in the way of nice heaters, ours are the size of huge unsightly washing machines......... But we ended up importing a Morso 7900s series stove which is nice but still large.......
Very informative, I haven't been using mine correctly 🙄. Thank you.
what a nice guy
I'm looking to get a multi fuel stove & using smokeless coal. Any chance of doing a starter video like this to show how it's best to use your burner if your not using longs. From what I've been told using longs isn't cheep & has a low burn time.
A moisture meter is an essential piece of kit with a wood burning stove. Don't just check the outside. Split the log with a small axe and measure the water content on the inside. You could well be in for a shock. That also applies very much to kiln dried logs. A quicker and easier way to light a wood burning stove is to simply place a log to the rear of the stove, place a firelighter directly in front of it and rest the kindling against the log over the firelighter. Wood always burns better with air flowing over it rather than through it. Any multifuel stove can be transformed simply by removing the grate and setting the fire on a bed of ashes.
I’m so keen on getting one of these, thanku for sharing all that. Info, Can I ask can you leave it burning when you go to bed or leave the house ?
Hi yes I do, if you have it professionally installed then you have the peace of mind that it is safe to leave.
I eliminated the kindling hassle by making my own natural gas log lighter. I notched the underside of the fire brick that lines the bottom of the firebox, sized.to accept the perforated 3/8 black pipe log lighter. The gas escapes in the spaces between the fire brick.
Can you do a video on multi fuel stoves and lighting smokeless fuel
Hi , yesterday we got a Ruby Phoenix installed...I was worried about how many types of wood we can use/allowed.
I have a pellet stove but I really want a wood stove can I use the chimney from the pellet stove for the wood stove?
Excellent content (pity about the video quality). Really helped me a lot. Thanks!
Hey great video. I have a question. I just got a stove. Has a 6" outlet on top for a 6" pipe. I put a 4" reducer on the 6" outlet and went up with 4" pipe to my brick chimney which already had a 4" hole. Will this adversely effect the air flow ??? PLease help as my first fire was a smokey mess and went out fairly quickly.
Yes, stoves are designed for the flue size they come with
Good video - however not all folk know what you mean by 'Jenga' so always explain or avoid popular culture - I had to look it up.
I'm an 80 year old Londoner and we have always used old free newpaper instead of expensive chemical (is that plastic packaging?) firelighters.
(Sorry about the 1950s Smog.)
My little wood burner here always gets going with newspaper, fine dry kindling - and I've been a stoker and fireman on steam locos and stationary engines.
Hi can you help me please.
I now a friend that's just chopped his conker tree down. Think he called it Horse chestnut. Is it any good in a wood burner.?
He said I can help my self to It. It all cut up in to Manageable pieces.
But is it any good?
Have a look here:- jotul.com/uk/home/choosing-the-best-wood-for-your-stove
Horse chestnut is not the best type of wood for burning as it spits and gives off a small amount of heat compared to other woods. It needs to be seasoned for at least a year preferably two to get the moisture content down to below 20% so that it burns cleanly and efficiently. That goes for any type of firewood.
Buying wood in bag. How much would that chord of wood cost!? Hahahahah
Burning for40 years .put two rounds or splits on each side .put paper small stuff ,pine cones in the middle place wood on top. Light it up get a cup coffee.,watch my fire.
Notice the guy feeding him loaded questions. 😉
Hi,is there a fan available for an Insert stove?
Hi, can you burn coal one day and then wood the next on a muli fuel burner pls.
Yes You can , just don’t burn both at the same time .
However, clean the ash pan out before burning coal ..
I would rather burn hard coal than wood.
You're doing it wrong. The best way to et the fire to draw as soon as possible is to use 2 x firestarters - one halved in amongst the kindling and the other sitting on top of the baffle directly underneath the flue. Light this one a couple of minutes before lighting the 2 halves and your fire is guaranteed to draw from the get go.
Love the guy with the fire.. the guy filming seems like an annoying Louis Theroux!
Omg why do people need instructions on how to start a wood fire?? Have people really become that stupid?? I was startibg wood fites in stoves when i was just a boy.