That was a gnarly crash that could have been much worse. Glad you are ok. My buddy and I were riding in Saltese this past weekend and he ended up breaking his leg in 4 places just from a minor spill. But I'm glad you are enjoying the new bike bro.
You don't need to remove the shrouds to take the tank off. in the rearmost of the plastics, they just clip in, youve gotta bend them out to get them out, but they dont break. undo the radiator bolts, the one bolt in the middle of the tank, and then the fuel pump wiring and fuel hose, then lift!
Great video! I always leave the shrouds mounted on the 2024 300 EXC gas tank when removing the tank. First unclip the rear part of each shroud then lift the tank up and it comes off with the shrouds mounted no problem. For my riding, when I switched to the TSP ERM tune fuel economy improved a lot (similar to a TPI) and I haven't found the need for a big tank (fuel economy was horrible with the stock tune). Crash at the end, ouch! If the bike starts rolling back always get off as quickly as possible. Glad you're not injured too badly...
I share your exact same conclusions with my '24 300XCW . I had a very lengthy phone conversation with KTM guru tuner John Ross and he explained how poorly KTM mapped the fuel and the PV on the XCW's . With my updated tune, my '24 is a "gentile animal" meaning still super smooth and luggable, pulls smooth and hard into the mid, and the midrange "wall" I hit previously with my stock mapping is gone, now I have top end that REALLY hauls the mail !! Fuel mapping is crisp everywhere as well.
New to dirt bikes not new to riding. Bought my 9 year old a ktm 65sx, now I'm looking for something for me. Loving the restore videos I'm finding from you. The new bike is awesome! Debating on buying and building an old one, or going new. Thank you for the inspirations!!
Hey buddy Glad that you like your New map but just so that you know it's the standard map on the 2025 300 XC that they put in their chatter box. That's why you feel it so alive and that's why she run clean when lugging the XC map prolong and accentuate the spark and the duration of the spark plug ignition by 3 hundred of a second. That is why she runs so good and seemed like she was off timed and drunk with unburned gaz. Enjoy my men!!! and keep on uploading such good content. Always interesting subject and really entertaining. 👍👍
Great video. My personal preference on the TBI is to run the TSP soft map for serious tech stuff (white map) and the TSP rich map for fast flowing single track (green map). Running the TSP head with low compression insert and 47T rear sprocket.
Sweet video!! I have a 22 tx 300 with the tsp reflash and medium compression head, bike is so fun!! Any tpi complaint is non existent once you upgrade with the tsp kit. Look forward to more videos!
Back in the mid 80’s when Kawi came out with the KIPS power valve someone, maybe Pro Circuit, sold a spacer that was 5-10 mm wide that added volume to the cover just like your new cover.
I’ve got that set up only difference is I went with acerbis tank and I haven’t gotten the power valve cover yet. What a great bike. Dope mod on the fuel tank. Get yourself some mxtech suspension and it will be even better tho!
Loved this video.... I never know what direction to go with upgrades. Made for a cool videos. Sorry about your crash, hope it heals up quick. Dude the 8 bit dirtbike shirt was dope. Is that going to be new merch?
Great video, I’ve watched it a couple of times now and plan to purchase the performance upgrades from Slavens. One small thing though, you stated in the video you didn’t have time to test each part individually so if you left it in the new performance mapping then added the cylinder head and tsp valve cover, you can’t really say that the ecu was the biggest improvement. You would need to revert to stock mapping and then add the cylinder head and ride it to compare. Either way, it sounds like a lot of people really tout the ecu so I’m gonna give it a whirl. $450 though, ouch!
Masterpiece of a video providing knowledge and fun riding. The ad was seamlessly worked in as well. I actually wanted to buy that pressure washer in the moment. Well done.
Yes and no. I have the tsp products on my ‘24 xcw and while they are significant performance upgrades, they do not turn the xcw into an xc. In the fast stuff, the xc will smoke the w every time. I have both bikes and they’re both awesome. Honestly, I don’t know which one I like better. I appreciate the videos and your enthusiasm. Good stuff!
There's a lot to be said for comfort on the bike. The way the rear linkage settles into corners vs the pds can mean your right hand is slowing you down more than any motor mods.
Gnarly crash man. I do think that PV cover will make a difference. The PV cover/chamber is designed to be an extension of the subports in the cylinder when the power valve is closed, so increasing the volume increases the bottom end torque. I put a power valve spacer on my older mechanical power valve Honda cr250 and it was a noticeable improvement on luggability for more hard enduro type trails and roll on power under the pipe. They're pretty common on Betas too.
I have a 24 xcw and no you don’t need to remove shrouds. I think it comes off with 3 bolts. The one up top by the seat and a couple bolts by the radiators.
The tank does come off with the shroud on it. You unbolt the shroud from the plastic radiator cover thing take your seat off and then in the middle of the tank yeah undo it like normal and then everything will pop off tank and shrouds
will you do more restoring old bikes videos? they were so good to watch, a good bike to restore would be a 500 2 stroke since you've never done it on your channel, that would be interesting
Out of interest, have you ridden your friend’s Beta? As you are new to 300s it would be a very interesting comparison to your KTM. Oh, and the speed that you and the bike accelerated backwards down that rock was scary! Glad you’re (relatively) ok.
great vid just really dont bellive the fuel injetcion idea is the best, thats the point u buy the bike or you buy the SX virsion, also if u run out of fuel somewhere u cant just put petrol in it but u need to carry the oil, and if ur mate has a 4 stroke and u need to swop fuel u cant u need to mix it ect. but at the end of the day its YOUR bike and do what you want, but everything else so cool. stay safe
First, please learn to type like an adult. Second, in 20 years I've never needed oil. I keep spare gas in the truck, bring a bottle or two with on long rides, and only ride with 2t. Friends don't let friends ride 4t😂
@@leftyeh6495 well im not a adult bro im 16.. thats nice of you to say. and where i ride i ride for 12 hours and theres no stops for fuel. and i said my friends have 4T and they give some of us 2T fuel if we need.
@@BoostedFB6 not sure what you have had but mine has not failed i have the newer bikes and i just keep an eye of it. yes i know the older 2018 and stuff they failed but i service my bike and i have owned a few and they rarely fail, its just a myth in my opinion
Awesome video ! Glad your ok after that hard Enduro crash . I can't help but wonder, I heard you say several times that the bike is "up to" or " more" xc ish. Why not just buy the xc instead of the xcw ?
I picked up a 2025 xcw recently. Coming from a 2019 te300i. I love the bike but am totally noticing how much of a pain in the ass it is to raise the front wheel in the high rev range, which you mention! Would you say that the ecu reflash or high comp head helped more with fixing that? Cheers!
That NGK plug you are using (NGK BPR8EIX) is a down grade from a conventional wire plug. Platinum and Iridium plugs are better for longevity not performance, they are better in applications with higher service intervals. I would go for a conventional wire plug BPR8ES, a convectional wire plug draws more heat out of a motor and is more forgiving and reliable with higher compression.
Holly shit man i felt your fear going backwards down that rock i did a similar thing years ago not good scary as fk look forward to your next vid 👍from down under mate .
@@KincadePavich really that’s crazy to me I run my 08 ktm 200xc at a 40:1 but I’m a 15 year old who likes his piston with 120 plus hours. Glad your okay too!
@@NoahKtm200xcmy 98 300 recommends 60:1 with quality synthetic oil. 40:1 if there's any question on the oil quality. My 08 and 19 both recommend motorex at 60:1, neither has issues.
Nice review! Lucky with that crash, lesson learn i guess! Never ever pull the cluth when you are going up hill. You let it die there, go back down and retry. You will want the map switch to go from white to green map. You will see a big difference in the gnarly stuff on the white map. Hope you get back soon on your bike 🤘🏼
Have you considered getting a head that requires VP C-12 108 octane leaded? I had Pro Circuit set up my YZ85 for this fuel and, after a day of jetting, was super fast. I’m 65 years old, 6’4”, and 250 lb, by the way.
Do you ride track or trail? That's a tiny chassis for a 240lb man 😂 Race gas isn't super available here. Where it is available it's $100+ for a 5 gallon can. AV gas is the next best thing but then you deal with lead fouling. Since we can buy ethanol free 91 all over it just doesn't make sense. Doubly so considering 4000' is low elevation.
@@leftyeh6495Mostly trail. It’s funny because on my 2022 YZ450F, I had the suspension stiffened up, but on the 85, I ran stock springs. I could easily keep up with larger bikes and the 85 is so low to the ground and turns so well that I could keep it on the pipe in turns, scraping footpegs and sometimes handlebars on the ground. I think modern bikes are too tall and long for trails. If I bought a new 300, I would consider getting the suspension lowered 2”. And, on the 450, I found a different map to get more power. I have a bunch of years experience on YZ400 and YZ490 2-strokes and the 450F seems too mellow.
Easier to turn an xc-w motor into an xc than change the chassis. 90% of the difference in the bikes is the rear suspension, only 10% engine (mapping, oil, and head)
I'm gonna have to keep that pressure washer in mind if I ever move to a different house. Right now someone would just yoink it, cause my driveway connects to the alleyway 😅
With all the performance upgrades/mods you made, would you still have changed the gearing? Or has the gearing change enhanced those mods? I'm very much looking forward to possibly getting back into dirt/trail bike riding after being away from it for a long time. I'm wanting the KTM 300 XC-W and would like to do the upgrades you have done. I look forward to watching more of your videos. How far are you from Butte, my son lives and works there?
Hey Kincade I'd like to suggest checking out PinIt Racing. He's done lots of testing on your new 300 and has great technical info on your new bike. He has lots of videos about all of his findings. I'd love for you to comment on what he talks about. I think it would make great content for your channel. Another great video and get well soon!!!
You have electric start. When it's stalling just let it die and use the engine to hold it while you gather yourself. 😂 You'll notice even the pros will let their bike die all the time if it means less effort and saving energy or effort during a race. Once you get it all gathered up it's a simple push of a button and you're off and running!
I am struggling to get the wheel up with my 24 250XC-W...like bad. Clutch windups and a hard bounce or pull and I can barely get the thing up more than a foot. So frustrating.
Same problem with my tx 300 23 , compared to a carbureted it seems a lot harder to get the front wheel up but you watch Rich Larson. He does just fine.
I've enjoyed your last few videos of the 2025 XC-W. But to be honest, sounds like buying and XC and adding a bigger stator and a flywheel weight would be a hell of a lot cheaper to end up with the same result. Thoughts?
My thoughts too ! I m wondering which way is a better idea, bigger stator and suspension mods on an xc or head mod, ECU mod, reed valve mod and exhaust valve cover on an xcw ? And still not quite the performance at an xc ?
@dougwelch6446 lots of people say XC-W cause it was no rear linkage. Well that is practically the only XC or Enduro bike / brand doing that and they are not on the top of the podium all the time. Don't think it makes that big of difference. Cheaper to modify an XC than the XC-W. I'll be buying an XC next bike.
@@MichaelPrest-s9q I downloaded TSPs recommended map for this bike which I believe is the XC tune and recently added the map switch and their soft tune as well
@@KincadePavich wasn’t sure if I run the erm with the head or not ? Was it better for hard stuff ? I’m more struggling with the singles needing more power to pull the right gearing otherwise it’s like a 125 up down up down
The suspension of 2020-2024 bikes is absolutely the same.I have talked with WP mechanics and they told me that.The WP XACT CC is installed on 2020+ bikes so the suspension is not a factor here.TPI has better fuel economy and does not have the fuel pick up problem.So I suggest you to go with 2020-2023
@@kisimov_17 Why do clueless people try to correct informed people? The 2024 is a completely different closed cartridge design. You have no idea what you are talking about.
@@kisimov_17 that's absolutely wrong. 24 onwards is WP XTAC with closed cartridges and better shock design. Before that, WP XPLOR which was really not very good. I went from a 21 to a 24 and the difference is MASSIVE when it comes to the stock suspension. I also prefer the TBI over the TPI even if I was one of the lucky ones who never actually had any issues with my TPI in 100+ hours.
Kincade, did you hardwire your fan or use the factory connector? I cant get mine to turn on, apparently the tps controller can remedy this issue with the ktm OCU?
@KincadePavich the xc fan? I bought the ktm spal fan, however when it's connected to the factory connector it never comes on. Odd. Going to hardwire it but I received my tsp today and I heard there's a setting you can change to make the fan work properly with the ktm OCU
It’s a bummer the internet thinks the fuel pick up on the stock 23-25 has issues … it works perfect oem. For someone like you who actually rides you would have zero issues. I have a 24 and ran stock tank almost dry zero issues. Now have the IMS and also have had no issues with fuel pick up. Only time would be if bike is on stand not moving and almost out of fuel Then yeah it wouldn’t pic up
No, that rock was incredibly steep. GoPro doesn't quite do it justice. If you watch both guys before me their front wheel is coming up too; the rock was just that steep that had to balance traction and not letting the front wheel up too far.
@@KincadePavich Yeah it looked really tough. I am new to 2 strokes so I wasn't sure if all of those gains made it hard to keep the front wheel down since the power comes on so much faster. Again, glad you weren't seriously injured. That looked quite scary.
@@TommyNitroit's all in the wrist... 😂 Between your clutch finger and your right wrist you control the bike. Letting the bike ride you like he did was a good way to make a boring situation exciting! 😂
I was indeed staring at your dirty air filter 😂
ikr
A clean one woulda given him an additional 3hp!
That was a gnarly crash that could have been much worse. Glad you are ok. My buddy and I were riding in Saltese this past weekend and he ended up breaking his leg in 4 places just from a minor spill. But I'm glad you are enjoying the new bike bro.
You don't need to remove the shrouds to take the tank off. in the rearmost of the plastics, they just clip in, youve gotta bend them out to get them out, but they dont break. undo the radiator bolts, the one bolt in the middle of the tank, and then the fuel pump wiring and fuel hose, then lift!
Great video! I always leave the shrouds mounted on the 2024 300 EXC gas tank when removing the tank. First unclip the rear part of each shroud then lift the tank up and it comes off with the shrouds mounted no problem. For my riding, when I switched to the TSP ERM tune fuel economy improved a lot (similar to a TPI) and I haven't found the need for a big tank (fuel economy was horrible with the stock tune). Crash at the end, ouch! If the bike starts rolling back always get off as quickly as possible. Glad you're not injured too badly...
I share your exact same conclusions with my '24 300XCW . I had a very lengthy phone conversation with KTM guru tuner John Ross and he explained how poorly KTM mapped the fuel and the PV on the XCW's . With my updated tune, my '24 is a "gentile animal" meaning still super smooth and luggable, pulls smooth and hard into the mid, and the midrange "wall" I hit previously with my stock mapping is gone, now I have top end that REALLY hauls the mail !! Fuel mapping is crisp everywhere as well.
I miss the old bike restore videos 😢 The ones where you buy a complete shit bike and renovate it to become a perfect bike.
Don’t worry there will be plenty more of those!
@@KincadePavich you ok after the crash? I was very worried about it..
Greetings from Venezuela ❤
@@KincadePavich im glad.🙏 All love brother, wish i lived closer to you guys. Seems like you have hella fun at your place 🤩💥
New to dirt bikes not new to riding. Bought my 9 year old a ktm 65sx, now I'm looking for something for me. Loving the restore videos I'm finding from you. The new bike is awesome! Debating on buying and building an old one, or going new. Thank you for the inspirations!!
Also love the rebuild videos 😅
Glad you are Ok Kincade! That was a hard hit! Bike is crazy!
Yes!!! Always a great morning when you get to start it with a Kincaid video.
ETA: that was a gnarly crash and I'm glad you're okay.
Hey buddy Glad that you like your New map but just so that you know it's the standard map on the 2025 300 XC that they put in their chatter box. That's why you feel it so alive and that's why she run clean when lugging the XC map prolong and accentuate the spark and the duration of the spark plug ignition by 3 hundred of a second. That is why she runs so good and seemed like she was off timed and drunk with unburned gaz. Enjoy my men!!! and keep on uploading such good content. Always interesting subject and really entertaining. 👍👍
The maps he was running do not come on the 25
ton of work in this video, great work ! great video. makes me want another 300.
Don’t forget to change the plastic T coolant fitting
Your content is some of the best out there
Damn, that crash was scary, thank god your okay and still all in one piece! Get well dude!
Great video. My personal preference on the TBI is to run the TSP soft map for serious tech stuff (white map) and the TSP rich map for fast flowing single track (green map). Running the TSP head with low compression insert and 47T rear sprocket.
Gonna get a map switch and give the soft map a try for hard enduro!
Glad you are ok bro. Take care of yourself. You know your best brother
I'm honestly amazed at how little damage you have on that pipe considering the crashes haha Good job!!
Sweet video!! I have a 22 tx 300 with the tsp reflash and medium compression head, bike is so fun!! Any tpi complaint is non existent once you upgrade with the tsp kit. Look forward to more videos!
Have a 22 tx as well 20 hours on it
Stock so far next year id like to do similar mods
Back in the mid 80’s when Kawi came out with the KIPS power valve someone, maybe Pro Circuit, sold a spacer that was 5-10 mm wide that added volume to the cover just like your new cover.
great video man keep up the great work, subbed.
Legend! That crash was indeed gnarly!
I’ve got that set up only difference is I went with acerbis tank and I haven’t gotten the power valve cover yet. What a great bike. Dope mod on the fuel tank. Get yourself some mxtech suspension and it will be even better tho!
Loved this video.... I never know what direction to go with upgrades. Made for a cool videos. Sorry about your crash, hope it heals up quick.
Dude the 8 bit dirtbike shirt was dope. Is that going to be new merch?
Great video, I’ve watched it a couple of times now and plan to purchase the performance upgrades from Slavens. One small thing though, you stated in the video you didn’t have time to test each part individually so if you left it in the new performance mapping then added the cylinder head and tsp valve cover, you can’t really say that the ecu was the biggest improvement. You would need to revert to stock mapping and then add the cylinder head and ride it to compare. Either way, it sounds like a lot of people really tout the ecu so I’m gonna give it a whirl. $450 though, ouch!
Masterpiece of a video providing knowledge and fun riding. The ad was seamlessly worked in as well. I actually wanted to buy that pressure washer in the moment. Well done.
Yes and no. I have the tsp products on my ‘24 xcw and while they are significant performance upgrades, they do not turn the xcw into an xc. In the fast stuff, the xc will smoke the w every time. I have both bikes and they’re both awesome. Honestly, I don’t know which one I like better. I appreciate the videos and your enthusiasm. Good stuff!
There's a lot to be said for comfort on the bike. The way the rear linkage settles into corners vs the pds can mean your right hand is slowing you down more than any motor mods.
Great video! It would be nice to see a comparison between the TSP map and TPI Tuning map with the stock head.
Ohh man you riding this bike is too smooth ❤
Great video...vey helpful information...crash at the end absolutely horrifying.
Gnarly crash man. I do think that PV cover will make a difference. The PV cover/chamber is designed to be an extension of the subports in the cylinder when the power valve is closed, so increasing the volume increases the bottom end torque. I put a power valve spacer on my older mechanical power valve Honda cr250 and it was a noticeable improvement on luggability for more hard enduro type trails and roll on power under the pipe. They're pretty common on Betas too.
I have a 24 xcw and no you don’t need to remove shrouds. I think it comes off with 3 bolts. The one up top by the seat and a couple bolts by the radiators.
KP, glad your ok, that crash could of been way worse. May try out that power washer looks very convenient.
Those trails looks so much fun
So, when are you going to put that FMF exhaust on that thing.
60/1 is a crazy fuel mixture. Dont think ive ever seen that lean of a mixture.
@@mindfreak9674 KTM recommends 60:1
The tank does come off with the shroud on it. You unbolt the shroud from the plastic radiator cover thing take your seat off and then in the middle of the tank yeah undo it like normal and then everything will pop off tank and shrouds
will you do more restoring old bikes videos? they were so good to watch, a good bike to restore would be a 500 2 stroke since you've never done it on your channel, that would be interesting
Out of interest, have you ridden your friend’s Beta? As you are new to 300s it would be a very interesting comparison to your KTM.
Oh, and the speed that you and the bike accelerated backwards down that rock was scary! Glad you’re (relatively) ok.
How much of a difference did the TSP cover make overall? Awesome vid.
Glad you're ok. That's a scary looking crash
great vid just really dont bellive the fuel injetcion idea is the best, thats the point u buy the bike or you buy the SX virsion, also if u run out of fuel somewhere u cant just put petrol in it but u need to carry the oil, and if ur mate has a 4 stroke and u need to swop fuel u cant u need to mix it ect. but at the end of the day its YOUR bike and do what you want, but everything else so cool. stay safe
Rather deal with that then have my oil pump fail (like they often do) and destroy the whole engine
First, please learn to type like an adult.
Second, in 20 years I've never needed oil. I keep spare gas in the truck, bring a bottle or two with on long rides, and only ride with 2t.
Friends don't let friends ride 4t😂
@@leftyeh6495 well im not a adult bro im 16.. thats nice of you to say. and where i ride i ride for 12 hours and theres no stops for fuel. and i said my friends have 4T and they give some of us 2T fuel if we need.
@@BoostedFB6 not sure what you have had but mine has not failed i have the newer bikes and i just keep an eye of it. yes i know the older 2018 and stuff they failed but i service my bike and i have owned a few and they rarely fail, its just a myth in my opinion
Awesome video ! Glad your ok after that hard Enduro crash . I can't help but wonder, I heard you say several times that the bike is "up to" or " more" xc ish. Why not just buy the xc instead of the xcw ?
I picked up a 2025 xcw recently. Coming from a 2019 te300i. I love the bike but am totally noticing how much of a pain in the ass it is to raise the front wheel in the high rev range, which you mention! Would you say that the ecu reflash or high comp head helped more with fixing that? Cheers!
Broke my right wrist really bad last week. Good that you are ok, it sucks so bad…
Nice video, love your bike !
That NGK plug you are using (NGK BPR8EIX) is a down grade from a conventional wire plug. Platinum and Iridium plugs are better for longevity not performance, they are better in applications with higher service intervals. I would go for a conventional wire plug BPR8ES, a convectional wire plug draws more heat out of a motor and is more forgiving and reliable with higher compression.
I remove tank with shrouds on but its a pain. Lots of prying back at the air box!!
Holly shit man i felt your fear going backwards down that rock i did a similar thing years ago not good scary as fk look forward to your next vid 👍from down under mate .
60:1!! That’s crazy lean
That is what KTM recommends for their 2 strokes. Been that way for a long time. That's what the 300 XC TBI is mixed at.
@@KincadePavich really that’s crazy to me I run my 08 ktm 200xc at a 40:1 but I’m a 15 year old who likes his piston with 120 plus hours. Glad your okay too!
@@KincadePavichTSP recommends 50:1
@@NoahKtm200xcmy 98 300 recommends 60:1 with quality synthetic oil. 40:1 if there's any question on the oil quality.
My 08 and 19 both recommend motorex at 60:1, neither has issues.
Nice review! Lucky with that crash, lesson learn i guess! Never ever pull the cluth when you are going up hill. You let it die there, go back down and retry.
You will want the map switch to go from white to green map. You will see a big difference in the gnarly stuff on the white map.
Hope you get back soon on your bike 🤘🏼
🤣
@@OtisFlint ?
Try a red power valve spring and FMF gnarly pipe too, huge difference with those two as well
Electronic power valve on these bikes
@@KincadePavichAhh that’s right lol
TSP FTW!!!
Heal up Bro...that looked Gnarly A.F. 😮
Do you have a recluse auto clutch? How do you build so much speed backwards if you don't make it?
Miss the old days. A pipe and v-force and jetting is all you needed.
Hello from Greece 🇬🇷 brother!!!
Have you considered getting a head that requires VP C-12 108 octane leaded?
I had Pro Circuit set up my YZ85 for this fuel and, after a day of jetting, was super fast. I’m 65 years old, 6’4”, and 250 lb, by the way.
Do you ride track or trail? That's a tiny chassis for a 240lb man 😂
Race gas isn't super available here. Where it is available it's $100+ for a 5 gallon can. AV gas is the next best thing but then you deal with lead fouling.
Since we can buy ethanol free 91 all over it just doesn't make sense. Doubly so considering 4000' is low elevation.
@@leftyeh6495Mostly trail. It’s funny because on my 2022 YZ450F, I had the suspension stiffened up, but on the 85, I ran stock springs. I could easily keep up with larger bikes and the 85 is so low to the ground and turns so well that I could keep it on the pipe in turns, scraping footpegs and sometimes handlebars on the ground.
I think modern bikes are too tall and long for trails. If I bought a new 300, I would consider getting the suspension lowered 2”.
And, on the 450, I found a different map to get more power. I have a bunch of years experience on YZ400 and YZ490 2-strokes and the 450F seems too mellow.
Dude just saw your short crash video……glad you’re ok
I think you should try an Rk tek head, personally I think they are the best cylinder head you can buy
Wouldn' t it be easier just to buy XC?😂 NICE vids, keep the good work.
Easier to turn an xc-w motor into an xc than change the chassis.
90% of the difference in the bikes is the rear suspension, only 10% engine (mapping, oil, and head)
Told u! The erm is head an shoulders above any of the other mods. What fuel are u running with the high comp an whats ur elevation?
Glad it wasn’t worse! That reflash seems legit. Not loading up
The American specced motorcycles must really be down on power compared to the models we get here in South Africa
I'm gonna have to keep that pressure washer in mind if I ever move to a different house.
Right now someone would just yoink it, cause my driveway connects to the alleyway 😅
18:56 I didn't know badger from breaking bad was into enduro
Can you apply carbon fiber or kevlar skins to that exposed tank. Its probavly thick but could be vulerable to.puncture. expect the unexpected always!!
My last thought would be puncture. It's probably 1/4" thick. 😂
They definitely run way better with the ERM. But they are still lacking on top end compared to the 23+ XC's, especially with an erm on the XC!
Subscribed✅
With all the performance upgrades/mods you made, would you still have changed the gearing? Or has the gearing change enhanced those mods? I'm very much looking forward to possibly getting back into dirt/trail bike riding after being away from it for a long time. I'm wanting the KTM 300 XC-W and would like to do the upgrades you have done. I look forward to watching more of your videos. How far are you from Butte, my son lives and works there?
What map(s) did you go with? Did you get map switch?
So I can turn a 25 xc into a xcw as well using the TSP kit, right?
Get better soon bro
Do you think you would do a build on a KLX300R?
Do you live in Butte ? I used to live in Bozeman and miss it so much ...
Great video! Wondering if you have messed with the gearing at all or plan to? Would be nice to see it in a video. Thanks
Yessir running 12/48 covered in this video! ruclips.net/video/e0OQRc1wREY/видео.html
@@KincadePavich thank you! Confirmed because I already ordered the 48 tooth sprocket! Erm next!
I have 2 broken 12 tooth sprockets... Went back to 13 tooth to stick with supersprox because they don't break.
@@leftyeh6495 what brand? You broke teeth off 12T sprockets or what? Never really heard of a front sprocket breaking
Would you recommend the high or medium comp head?
Ass over apatite, glad you're okay. Keep kill'n it, love your channel.
What sprocket setup are you running
Hey Kincade I'd like to suggest checking out PinIt Racing. He's done lots of testing on your new 300 and has great technical info on your new bike. He has lots of videos about all of his findings. I'd love for you to comment on what he talks about. I think it would make great content for your channel. Another great video and get well soon!!!
I’d love to see dyno numbers if possible.
What was the reasoning to go with a colder plug? Does the high comp head require it?
@@tb1951 yes that is the plug they recommend with that high comp head
Colder plug will be more resistant to premature detonation (pinging, spark knock, etc). Detonation kills pistons.
Dont remove shrouds when removing tank, lift from the front of the shrouds and tank with shrouds will pop right off
trail rider from philippines!!
You have electric start. When it's stalling just let it die and use the engine to hold it while you gather yourself. 😂
You'll notice even the pros will let their bike die all the time if it means less effort and saving energy or effort during a race.
Once you get it all gathered up it's a simple push of a button and you're off and running!
Why did you mix at 60:1? It seems lean, but just curious the thought behind what ratio to mix it at.
KTM factory spec. 60:1 is plenty of oil for anything besides a small-bore MX bike.
@@OtisFlint Gotcha. Im not familiar with KTM 2-Strokes or enduro oriented 2-strokes. I use 40:1 in my YZ 250. Thanks for the clearity
I am struggling to get the wheel up with my 24 250XC-W...like bad. Clutch windups and a hard bounce or pull and I can barely get the thing up more than a foot. So frustrating.
The ERM is for 250s as well. I bet it would wake that bike up too. Seriously, night and day difference.
Same problem with my tx 300 23 , compared to a carbureted it seems a lot harder to get the front wheel up but you watch Rich Larson. He does just fine.
Only thing that's missing is a pipe guard!!
I've enjoyed your last few videos of the 2025 XC-W. But to be honest, sounds like buying and XC and adding a bigger stator and a flywheel weight would be a hell of a lot cheaper to end up with the same result. Thoughts?
Rear suspension...
@leftyeh6495 Yes, if you really don't want rear linkage. Hope you are all healed up from your crash!!!
My thoughts too ! I m wondering which way is a better idea, bigger stator and suspension mods on an xc or head mod, ECU mod, reed valve mod and exhaust valve cover on an xcw ? And still not quite the performance at an xc ?
@dougwelch6446 lots of people say XC-W cause it was no rear linkage. Well that is practically the only XC or Enduro bike / brand doing that and they are not on the top of the podium all the time. Don't think it makes that big of difference.
Cheaper to modify an XC than the XC-W. I'll be buying an XC next bike.
Was that monte on the Honda in your first group ride? I can’t tell, doesn’t appear to be wearing red flannel. Does monte do the enduro stuff too?
That was Preston Campbell. Monty doesn't really ride hard enduro
Would you put a exhaust on it
noticed you removed the ims tank nad put on the original tank at the end, any reason for that?
No that’s the IMS tank, I never took it off
@@KincadePavich oh yeah, i think the handguards made it look a bit smaller
Was that the tune that came with the erm or did you do your own ?
@@MichaelPrest-s9q I downloaded TSPs recommended map for this bike which I believe is the XC tune and recently added the map switch and their soft tune as well
@@KincadePavich wasn’t sure if I run the erm with the head or not ?
Was it better for hard stuff ? I’m more struggling with the singles needing more power to pull the right gearing otherwise it’s like a 125 up down up down
Is the 24 300 so mutch better then the years before? Or should I look for good 23 year deal?
Don't buy a '23, suspension is the most important thing about a bike and 24+ suspension is a massive upgrade.
The suspension of 2020-2024 bikes is absolutely the same.I have talked with WP mechanics and they told me that.The WP XACT CC is installed on 2020+ bikes so the suspension is not a factor here.TPI has better fuel economy and does not have the fuel pick up problem.So I suggest you to go with 2020-2023
@@kisimov_17 Why do clueless people try to correct informed people? The 2024 is a completely different closed cartridge design. You have no idea what you are talking about.
@@kisimov_17 that's absolutely wrong. 24 onwards is WP XTAC with closed cartridges and better shock design. Before that, WP XPLOR which was really not very good.
I went from a 21 to a 24 and the difference is MASSIVE when it comes to the stock suspension. I also prefer the TBI over the TPI even if I was one of the lucky ones who never actually had any issues with my TPI in 100+ hours.
Kincade, did you hardwire your fan or use the factory connector? I cant get mine to turn on, apparently the tps controller can remedy this issue with the ktm OCU?
I have the XC fan; it's wired directly to the battery.
@KincadePavich the xc fan? I bought the ktm spal fan, however when it's connected to the factory connector it never comes on. Odd. Going to hardwire it but I received my tsp today and I heard there's a setting you can change to make the fan work properly with the ktm OCU
It’s a bummer the internet thinks the fuel pick up on the stock 23-25 has issues … it works perfect oem.
For someone like you who actually rides you would have zero issues.
I have a 24 and ran stock tank almost dry zero issues. Now have the IMS and also have had no issues with fuel pick up.
Only time would be if bike is on stand not moving and almost out of fuel Then yeah it wouldn’t pic up
So tell me how the heck dont that thing blow up at 60:1!?
Wow, glad you're ok. Did all of that power make it hard to get the power down without looping it out?
No, that rock was incredibly steep. GoPro doesn't quite do it justice. If you watch both guys before me their front wheel is coming up too; the rock was just that steep that had to balance traction and not letting the front wheel up too far.
@@KincadePavich Yeah it looked really tough. I am new to 2 strokes so I wasn't sure if all of those gains made it hard to keep the front wheel down since the power comes on so much faster. Again, glad you weren't seriously injured. That looked quite scary.
@@TommyNitroit's all in the wrist... 😂
Between your clutch finger and your right wrist you control the bike.
Letting the bike ride you like he did was a good way to make a boring situation exciting! 😂
Make a dyno run with your friends stock bike and your modified!
Interesting! So how many $$$ is this on top of a $12k bike?
Your back tire let you down on that climb
you gotta get a pipe guard