Stars & Stripes
HTML-код
- Опубликовано: 12 сен 2024
- Instagram: @RJBWoodturner
E-Mail: RJBWoodturner@yahoo.com
Patreon: Patreon.com/RJBWoodturner
My Etsy Store: www.etsy.com/s...
Redbubble: www.redbubble.c...
Be sure to check out my second channel: WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time.
/ whatchadoinbob
Preparing Acrylic Blanks for Turning: • Preparing Acrylic Blan...
Preparing Wood Blanks for Turning: • Preparing Wood Blanks ...
Below are links to the tools I used in this video, or similar tools that will perform the same job. “As an Amazon Associate, I earn from qualifying purchases.”
Blank Prep:
Rikon 10” Bandsaw - amzn.to/3eOULP8 (Craftsman not available)
Blank Cutting Jig - www.turnerswar... (Search for Blank Cutting Jig.)
Blank Centering Jig - amzn.to/2S4fC7r
Machinist Square - amzn.to/3gM6BQb
Deburring Tool - amzn.to/3UlMJ45
Drill Press - amzn.to/3cUrwJl
Drill Vise - amzn.to/34Yv4aC
Pen Tube Insertion Tool - amzn.to/3bLeGfW
Play Doh - amzn.to/2xTUw4V
Epoxy - amzn.to/2VOaTYI
Craft Sticks - amzn.to/2KrrHQ5
Barrel Trimmer - amzn.to/36nUQpb
9” Delta Disk Sander - amzn.to/2yINGiA (Craftsman was not available)
9” x 150 grit replacement sandpaper disks - amzn.to/2Y1U0fO
Abrasive Disk Cleaner - amzn.to/3D3HtLX
Rafter Square - amzn.to/2Xo4bcy
2” C-Clamp - amzn.to/3aBstoj
Sanding Jig - www.turnerswar... (Search for Sanding Jig)
Jewelers File - amzn.to/3bRN5Jp
3/8” Bottle Brushes - amzn.to/3eNOhjJ
Turning Accessories:
#2 MT 60 Degree Drive Center - amzn.to/2TmpUzB
#160 MT Degree Live Center - amzn.to/38U6Sqs
#2 MT 60 Degree Live Center - amzn.to/36F27Qg
#1 Mandrel Saver - amzn.to/2Tu6LfZ
#2 Mandrel Saver - amzn.to/2XiEdYb
Tools:
¾” Roughing Gouge - amzn.to/2uGkpDM
¾” Skew - amzn.to/35ozkSV
1/8” Parting Tool - amzn.to/37H3W09
Detail Gouge - amzn.to/37Gmz4o
Chucks:
#1 MT Jacobs Chuck - amzn.to/38oxhfL
#2 MT Jacobs Chuck - amzn.to/38rwDOU
Collet Chuck Set - amzn.to/37e6gf0
Collet for 3/4” Stock (Not Included in set with chuck) - amzn.to/2RAikAv
26 piece set of E-32 Spring Collets - amzn.to/39GYI5K
Nova Chuck - amzn.to/2W3v1YG
Nova Mini Jaw Set - amzn.to/2vVzNN8
Bits Taps & Dies Starter Bits - amzn.to/36blqjN
27/64” Drill Bit - amzn.to/2VxDBOX
Drill Bit Set - amzn.to/3apKt6d
M10 x 1 Die - amzn.to/33cd7EG
M10 x 1 Tap - amzn.to/33670S6
M13 x .8 Die - M13 x .8 Tap - Tap & Die Set - amzn.to/38oxFLf
#1 MT - Tap & Die Tool Holder - amzn.to/3awtFtY
#2 MT Tap & Die Tool Holder - amzn.to/2NJu4zK
Sharpening: Rikon Slow Speed Grinder - amzn.to/2TIq2LR
200 Grit CBN Wheel - www.woodturnerswonders.com (Call For Proper Fit: (678) 400-8181)
Wolverine Sharpening System - amzn.to/2xMPZBp
Dust Collection: Dust Deputy - amzn.to/3cdxOUF
Dust Right Lathe Dust Collection - amzn.to/2Pvd2pW
Craftsman 16 Gallon Shop Vac - amzn.to/2T6Nz8w
Finishing:
Turning Sandpaper - amzn.to/2RziHLP
100 Grit Sandpaper - amzn.to/2zm5twl
Zona Paper - www.turnerswar... (Search for Zona)
Non-Stick Bushings - amzn.to/392M5l4
Penn State Thin C/A Glue PKCAFIN www.pennstateind.com
Starbond Aerosol Activator - amzn.to/3832Fjr
Starbond Medium C/A Glue - amzn.to/2T5zMif
Micro Mesh Pads - amzn.to/2GFigKU
Renaissance Wax - amzn.to/2I3Zb5O
Buffing Wheels - amzn.to/2teAz6D
Milescraft Pen Press - amzn.to/32zjn8Z
Metal Lathe:
0000 Steel Wool - amzn.to/30Mr9M0
½” Aluminum Rod - amzn.to/3at0Ej1
1/2” HDPE Rod - amzn.to/30EyTiU
Mineral Oil - amzn.to/2v7NQ1A
Brushes for Mineral Oil - amzn.to/2TCREl0
Digital Calipers - amzn.to/2NLuJ3t
HSS Cutting Steel - amzn.to/2RBM8Nm
HSS Parting Blade - amzn.to/3auoIC8
Punch Tool - amzn.to/2XXClpD
Metal Marking Tool - amzn.to/37o7Gnr
Other:
#1 MT Taper Mate Morse Taper Cleaner - www.woodturnerscatalog.com
#2 MT Taper Mate Morse Taper Cleaner - www.woodturnerscatalog.com
7/16” Wrench - amzn.to/3ePikr6
Acetone - amzn.to/2yovew5
Nitrile Gloves - amzn.to/2TIpNjV
Parker Ink Refill (Black) - amzn.to/2REsVux
Parker Ink Refill (Blue) - amzn.to/2TFsLp4
Parker Refills with Springs (Black) - amzn.to/319RW4O
Thin Rip Jig for Table Saw and Router Table: amzn.to/2wl3WFU
Pen Disassembly Soft Grip Pliers - amzn.to/32wWeUG
Beautiful results after a good work Bob !👍
Thank you Kwstas.
Regards,
Bob
Nice job. I salute your job on the pen.
Thank you Paul,
It turned out way better than I expected.
Regards,
Bob
Great job Rob. I use carbide on acrylics, but I use a negative rake cutter, works fantastic.
All I have is the Magic Skew and the square cutter from Easy Wood. I don’t own a carbide scraper. I’ve heard a lot about them but don’t think I’m going to buy one. Maybe if some company wants to sponsor me. 😁
Regards,
Bob
That's a very nice kit.
Thank you Andi.
Regards,
Bob
Great looking pen, I have never had any luck turning an acrylic blank. Maybe I should try another.
Thank you,
They are very brittle. You should definitely try another. Take light cuts and turn the speed up. I turn at 3,000 RPM.
Regards,
Bob
You know what is a great trick for the long acrylic blanks is to spray a little water in the hole as you drill it to make so the drill slides better
Cool tip David,
Thank you for posting it here. Lots of people
Read these comments and it may help someone.
Regards,
Bob
From what I've heard also, those Acrylic Stars and Stripes blanks from WoodCraft crack, melt, explode, and have all kinds of turning problems. I've heard very sharp tools and very light passes - kind of like you need on Inlace Acrylester blanks. I'm glad it turned out good for you. Made a really nice looking pen with that kit. - Dave
Thank you Dave,
I would agree with very sharp tools and very light passes.
Regards,
Bob
Nice looking pen! You got it before the 4th of July.
Thank you.
And before Memorial day. 😀
Regards
Bob
I tried three times to turn one of those and blew all them out. That turned out beautiful.
Thank you Frank.
I had issues until I went to the skew then not one chip. I was totally expecting disaster.
Regards,
Bob
That is a good looking pen, Bob. Sometimes tougher turns produce the best looking pens.
Thank you Robert,
You are so right. I think you take more time with difficult materials trying not to have issues and that extra time translates into a nicer finished product.
Regards,
Bob
Hi! We love this! May we share your video to our social pages? We'll tag you in the post. Thanks!
Yes, you can share this video
Regards,
Bob
Hard turn
Beautiful pen
Stars and Stripes USA
Thank you.
Regards,
Bob
That is a great looking pen. I wonder if that carbide at 45° is just to aggressive.
Somebody swipe your pen, that sounds a lot like breaking the law. That shows a touch of evil, which happens from living after midnight. Don't let a panic attack manifest before the dawn. Remember to ride the wind.
I think carbide in itself is way too aggressive. I use it from time to time but the tough blanks, I always use the Skew on.
Great play on words with the JP songs. The concert was amazing!
Regards,
Bob
Who sells this pen kit.
Www.dropanchorcreations.com
Ask for Michelle and tell her I sent you.
Regards,
Bob