I Bought a WRECKED 2020 Jet Ski For REALLY CHEAP!
HTML-код
- Опубликовано: 21 июл 2024
- What do you think? Was this a good deal or not?
Follow my other platforms!
Instagram:
ultimate_re...
Facebook:
people/Ultim...
Tik tok:
www.tiktok.com/@ultimaterebui...
Video Music:
------------------------------
Track: Inside - Amine Maxwell & Soyb [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Inside - Amine Maxwell...
Free Download / Stream: alplus.io/inside-amine-maxwel...
------------------------------
------------------------------------------------------
Song: Balynt - Believe
Music provided by Balynt
Video Link: • Balynt - Believe [Vlog...
Song: Niya - A Commitment
Music provided by Vlog No Copyright Music.
Video Link: • Niya - A Commitment (V...
------------------------------
Free by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3HJfWmf
Music promoted by Audio Library • Free - KV (No Copyrigh...
------------------------------ 
Авто/Мото
![Rob49 - On Dat Money (with Cardi B) [Official Video]](http://i.ytimg.com/vi/fTFS58mHJh8/mqdefault.jpg)
Great to see you back posting regularly and look forward to watching this build.
I'm going it fell off the trailer while being towed.
Often rentals they neuter them to limit top speed. The seadoos often come with different keys some have 2 or 3 with different levels of freedom. It even limits how hard you can turn at certain speeds.
The GTI does not come with the reboarding ladder. The GTI SE comes with it. You can buy it though and add it on.
I just bought a similar model, Wake 170, and I am SUPER pumped for it. FYI your model is probably 130HP. But it's the same engine as the 170 HP, it just needs the ECU to be flashed to 170HP, no part changes. You can get the upgrade from Reliable Tuning, or other tuning places.
The rentals you showed that are going for 6000 are GTX Pro's not a GTI like yours. Much different hull, the GTX pro is still a fiberglass hull, not a polytech hull.
Something to take into consideration is that you get 2 keys with the Seadoo, one is a learner key which gives you about that speed and the other is normal (full potential). I would leave the wearing for now, complete the build and see. Normally when there is an issue with wearing or impeller, it would be high revs and no go (like a car with slipping clutch). Something i have noticed is that if the ski was not used for a while, if u start riding it for an hour or so it gets better (faster). Carbon seal would obviously be something to look at if it takes on water but this is all quick and easy fixes thats easy and inexpensive to repair.
Also if it is a rental unit it could be what’s called a R key rental key which will limit rpm and top speed if he wants to contact me I have buds and can check all the engine lights and program any keys he wants for free
Anyway to tell what kind of key I have? It only came with one. Would make sense about it not reaching top speed.
@@ultimaterebuilds7127 can you not contact the seller about the possibility of a missing key?
Great video Zac!!
If it will start with a magnet instead of the key then its not a programmed key.
@@jakeblack2876 it’s not common for a rental ski to have the dess disabled. Also you need a megatech license to disable the dess system. If he wants me to I can disable it for him.
I love your videos. I totally get a kick out of the good, the Bad and the ugly that you make whole again. Well mostly whole again. Keep up the good work. Your builds that don’t end up the way you would like are some of your best.👍👍👍😎😎😎
@Ultimate Rebuilds I can’t tell you how proud I am of you. You truly are amazing! I am a novice woodworker. So I have an appreciation for anything mechanical. It’s great to see you overcome obstacles. I am very confident that there is nothing that is put before you that you can’t overcome.
XD
Here's proof that some people are nice!
Saying "especially when it's cold" while wearing shorts and a t-shirt is such a Florida thing... 🤣
If it’s under 80 degrees it’s cold 😂
@@ultimaterebuilds7127 why don't you buy yourself a multimeter? Why are you wasting your time, money and nerves listing good stuff instead of checking it with a $20 gauge
Me watching from my snow covered house lol
@@ultimaterebuilds7127 yup... very true.
@@ultimaterebuilds7127I have a build idea. Build a pontoon boat that’s powered by two jet skis that can be detached while pontoon is ankered.
Great video! Sea Doo does 2 keys, training and open. Hopefully you just have the training key that tops out at 33 or 37.
You should do a compression test on the engine.
Gr8 to see you back at it Zach! This is going to be fun to watch you bring her back to her glory days!
Be sure to check the carbon seal and the wear ring and make sure you have the correct key and not the learners key which also limits your speed. Don’t lose the vin when you do the fiberglass reriviting it should work. And to fully change the oil and suck it all out hold the throttle wide open and crank for 5-10 sec at a time so that about 3 times or until it starts to run dry. I don’t know if the newer seadoos use paint,epoxy or gelcoat but try and Stick with what they used originally paint doesn’t tend to hold up well with jetskis. Hope the build goes well for you.
Great to see that you now have a motivating and working project, keep it up, you're the only reason why I still visit RUclips
Nice to see another vid so quick
thanks for the post Zach, great to have you back
Glad you are back!
Gonna be fun to follow! Glad you got a good running one this time, I think it will be fun once it is done, might be hard to let go once it is finished LOL, too new and cool to ride! We shall see! Thanks for sharing this.
I want you to know we're out here cheering you on! Yeah, you're buying Ef'd up stuff but you have a vision and you aren't scared off by the challenge. I'm working on two 2007 Waverunners I bought during Covid holiday almost 3 years ago. $1500 including trailer. I have 3 holes to repair and THIS video of yours I'm watching now... Cheers!
My son was just now showing me this as I was working on ours and a couple customer skis, and let me say, I have seen a couple of your videos over the last year. You my man (insert a Denzel Meme) could go to work as a Copart contractor! Nice work! I really enjoyed the video! Everyone freaks out about these hulls, not only with doo's but Yami's as well. It's not as strong as factory, but it is sound for the pound. Good job broski!
This is going to be an interesting project, I'm looking forward to seeing the next episode. 👍
Get yourself a multimeter and learn to read a wiring diagram. It will save you a lot of money and heartache. You wouldn’t of had to buy the new battery or multiple starter solenoid’s. I enjoy your videos! Keep them coming!
The trouble you could save your self with a voltage meter. Props for figuring it out tho
This is why ilove to see this channel it's have a diffrent build and after he talks about the build he just wrenching it 🔥🔥🔥
Send love from indonesian 🇲🇨
Love your channel man!
As for my humble opinion...ive been watching you for the past few years...from complete pontoon refurbishing to crazy custom golf carts...and 1 crappy surfboard...your skills are now way beyond these little projects...I would love to see you get some big crazy old powerboat or cruizer and take 6-12 months to build a masterpiece...you are so talented its nuts.
Ill def be watching this one, cant wait to see the progress on it! bummer about the yami but hype the seadoo is mechanically decent!
YESSS JET SKI CONTENT!!
Glad you are having better luck with this project.
SPEAKERS!!!!! Cant wait for the painting and fibreglass fix videos
Can’t wait to see the next video
Trade your Yamaha hull for a seadoo hull. Pollytech is a pain to repair without the expensive equipment from what I heard.
yes, yes! we keep buying jetskis i love it! keep em coming!
The 2020 GTI came in 3 options 1(90hp) 2(130hp) 3 (170hp) would be nice to know what one you have.
Of all the content you have done this kind is my fav. Last make this one custom with parts outside the box i think you can do alot with this base. I look forward to your next vid.
always interesting your rebuilds, this looks quite scary
Good luck with the build
TYSM for this video :)
A quick tip for you on diagnosing a clicking ski.
Use a multimeter and put the positive (+) end on the positive cable attached to the starter if you get 12v when you hit the start button it’s a bad/locked up starter. If not it’s the solenoid.
The starters on these skis can lock up when you transport them long distances so if it’s been sitting a while give it a whack to see if it frees it up.
There’s a really good video that explains the whole clicking diagnose issue on skis that I’ll link below as it’s a hidden gem on RUclips.
ruclips.net/video/i74IxbRjW5s/видео.html
I only found it due to rebuilding a clicking 800 XL. Ended up being my wear ring needing replaced. If all else fails a really good tip if everything seems to be working is to remove the jet pump/impeller as a seized impeller will stop the ski from turning over as well.
love the videos im trying to do the same thing in st louis how much did you pay for it
I believe on some models if the gauge says maintenance it will be in reduced power mode.
keep an eye on the carbon seal when water testing it
I was waiting for that new big golf cart to pull the Seadoo down to the water!
I don't know if the principle applies to plasticized fiberglass.. But I've heard that drilling a hole at the end of a crack, can in some cases prevent the fracture from spreading further. If you don't believe me I would definitely still look it up
I've never ridden a jet ski yet... but it's on my bucket list. I hope to rent one this summer.
They are a blast!
I can't wait to watch this :DDDD
I really think you should check out 90s Kawasaki 650 and 750 skis.
Definitely needs a speaker system and then maybe a Thru hull exhaust to give it a little kick lol.
The trailer alone is worth the money. They were really hard to find in 2020. I know I bought two Sparks and the dealer here in California had no trailers to go with them. I had two older Polaris skis so I got rid of them as they were money pits and put the Sea Doos on the trailer.
Would you be interested in a regal bowrider? I have one that would be a perfect fit for your content
The BT Pyle system would be a great addition
Some crazy lights and speakers would be awesome.
One thing I’ve learnt the hard way is that charging Sea-Doos, whilst the battery is connected can cause the starter solenoid to go bad.
Take into consideration that the gauge might say it has 600+ hours, but since the gauge package on powersport equipment is the one who keeps track of the miles/hours, they might of left the key on collecting hours so there is a real possibility that the engine might have less runtime.
hours only get counted when it’s running
Hey the starter isn't getting stuck, it is just going bad. If it stops on a bad spot in the windings, it will not crank until you hit it. You will need to replace the starter itself.
As much fun as jp racing has with his jet ski kart I could see you doing something just like that. Would be cool for the summer and something different out on the water. Check out his channel JP Racing
yo its been so long scene you posted a jet ski video
I got a good idea!!!!! Take the motor out of the other ski and paint it and make it all nice and slap an outboard on it!!!!! Use the area where the motor was for storage or a cooler or make it a fishing jet ski !!
I would say it's an OK deal if you can get away with putting less than $1,000 into it. Even a perfectly running ski with that many hours, damage and rental history is worth probably $4,500 best case scenario when fixed. Just too many hours.
Thought you learned your lesson on rentals. 😀 J/K I know it was purchased before you figured out how bad of an idea it was. I just had to say it. I wish you luck and hope that your subscriber count goes way up really soon as you deserve it.
Looks like you started with a mini - win! See what keys you have from the comments of others and you should be good to go 🐊🤟
Buy jet skis and places like Nebraska people only get a use of the couple times a year because they are landlocked and they’re going around a little tiny lake/pond so you get them brand new condition no hours on them for super cheap because they can’t sell them
how does it get this bad? all rentals near me sure are used and abused but never missing any parts or have holes in them
I would stick the seadoo motor if its fine, into the yamaha shell.
Put dual bilge pumps in it
You know that jetski was smiling to be back at it again on the water
Have to change the color for sure
Yayyyy Flex Tape!!!
i dont understand how people let there skis get that bad but you should be able to fix some stuff pretty easily
Good shit man
We don’t have the same definition of cold. LOL
Wow. What a hole! Classic.
Make sure you have the key for an experienced rider. It looks like it is governed and especially since it was a rental jetski most likely they didn't give you normal key to it
"frustrating troubleshooting" aka ordering parts until something works. The lack of mechanical knowledge is insanity at this point if you can't trace a basic 12 volt system with a $5 multimeter
Here's a better idea. Pull the motor, get it tuned up, carb cleaned, etc... once motor in top shape, drop it in a mini jet boat hull. It should kick ass. Say a 12 foot aluminum jet boat hull. Your welcome
If you need any help with anything just message me I would be happy to help for the past couple months I've been working on rental jet skis as well, for the sides of the bumpers if it gets too expensive use hydroturf sheets
Set it up for fishing
Your steering cable probably needs to he replaced or adjusted
Considering the damage, all the broken trim, overall wear and tear and the hours I don't think I would pay much more than 1000 bucks for that.
Turbo, put a turbo on this thing. They offer more speed than speakers.
check that they carbon seal isn’t cracked i have seen it happen many times also the rpm’s u are getting vs the speed is not correct
Great video as always. Funny thing, last summer I rented skies from the place you bought this. I was looking into picking it up for a project. You will do a much better job in sure of it.
I really think I may know what is going on with the JetSurf. Reach out to me if your interested in any help. Thanks for the video’s. I know it’s lots of work.
I loke your gray shirt. "LEAVE ME ALONE."
@$100 an hour hire rate and its done 800 hours thats 80K not bad
You could have crossed the solenoid to test it instead of buying new ones you will also be buying impellers if you keep running the engine with no water atleast use some dish soap to lube the impeller if you want to run the engine briefly just a suggestion
Can’t do that on these seadoos because of the chip in the key
The impeller isn't what gets damaged. These are closed loop systems, the only thing the sea water cools is the intercooler and the carbon seal gets cooled by the water as well. The impeller doesn't get lubed nor does it need to be
Looks like it may have fallen off a trailer during transport.
He really just put on duck tape and went 17kmh in the warter😂
You're showing pictures of GTX Pros with high hours. That's a lot more expensive machine compared to the GTI Pro..
build a fishing ski out of it
🤝
Take the seedoo driveline and throw it all in the Yamaha hull
Seems like way more work than it would be worth
I would pay less than five grand for like a perfect one running and driving in fully serviced
Not the gti 90😭
Hello!
Who do they rent those too... institute for the blind ...
I sawed my boat in half
I’m on my couch hurting for you. I love your stuff but there is now way you should have paid more than $1200 for this ski. This is the most basic cheep model they make and the thing is pretty much totaled. If it was me I really would just part out what you can and get another project ski that’s a little bit nicer of a model. I do believe this ski only has a top speed of 43mph. Anyhow do what you wish with this being said I just don’t want you to feel the pain and suffering you are about to experience
just duct tape it all and list it online for $6500 lol
Do you have a PayPal account so we can help fund these poor decisions?
Clinch?
Eww a sinkdoo. I've seen Yamahas mr1 get over 3 k hours. Most get well over 2k on the nr1 engine
The guy you bought it from should have paid you 100$ to take it off his hands.
Hope you watched my GTI plastic weld/repair video!
Also to rule out starter just cross the terminals on solenoid