With ya on that comment. That boy driving them wedges acts like he's trying to cut the tree in half. Real nice saw, but good God ol'mighty gerty. Praying to God at the end of the job isn't when I'd have chosen to ask for help. 😂😂😂
I have a husqvarna 3120K saw with the 119cc 9.2hp engine and I ordered the 60mm piston/ring/cylinder kit on ebay for $85 and installed it easy, just 4 screws right on the top of the head so very easy to get to. I ported the muffler outlet and added a 2nd exhaust tip and this saw is an absolute beast now. Only problem is it weighs 50lbs since it's a racine rail products ultra kut 2 but it costs $2900 and I bought it for only $40 non running and greasy and rusty. Took it home and added some 2 stroke mix and fuel immediately started shooting out of the fuel line. Replaced the fuel line and fuel filter and it started right up so I washed it, removed all of the rust and polished it up real good and now it looks tough and runs very strong. This saw is so big that it's impressive to look at just sitting on the floor of my office. I run it with the top cover off and a k&n air filter on it because the muffler, head and carb are so huge on this saw that it looks better with no top cover. I have only $160 total tied up in this saw including the $40 for the saw, the piston kit and a few cosmetic parts so I'm very happy with it.
thanks for the great video to show people how not to be safe and also handle a chainsaw. loved the part where you dragged the bar across the ground back to the truck :)
I run a 4' bar on the 390xp and it will wear you out after a while. You would want to start a workout program to safely work this big saw for a whole day :)
First of all, I give dude credit he has good aim with the hammer haha. Secondly, doesn't sound like your saws getting enough to drink on top end at all... Unless you installed launch control and it's just two steppin lol
These guys obviously haven't heard of or seen a chainsaw kickback before. Dude hammering in those wedges is gonna end up totally wrecked if they keep that up. Favorite part was the end, watching that guy dragging his chain thru the dirt, who does that?! Lo
Ouch. That chainsaw deserves a good home man. If my 3120 was being dragged along the ground with the bar in the dirt like that by Mr Midget Felling Co. I would lose my shit big time.
What the heck did I just see! I can't believe nothing went wrong there. More motor than brains in all combined! Guess the guy with the camera was praying the whole time! Lol
The tree was winched over 9,500 warn winch ,measured from base to top to exact place it fell just short of power line because we did not want to dispatch power co
I really dont see why these guys are getting so many negative comments.Yes ,replace the claw hammer with a 4 pound sledge,but hell,the tree went down where they wanted it.Nobody was hurt,and Im sure they cleaned up the mess and got their money.There are 2 kinds of people in this world.Ones that go get it done,and ones that set watching youtube videos criticizing those that actually have the gumption to do it.Id say 4 out of 5 of these critics couldnt even start a chainsaw,much less carry a beast like that 3120.And for the guy driving so many wedges...hell,he is getting paid,he may as well do something.
Need to open the high jet a little more. When a saw is running at 13 14k rpm and it sounds 4 stroke your going to kill it... yes that’s a big ass tree. But could’ve been done with a bar 2 foot shorter I LOVE how at the end the guy plunges the small saw into the stump and leaves it.. and then dude drags the chain thru the dirt....smh.
you sir ! got really scared when that tree started going! never seen a man shake that hard with a saw in his hands @1:40. and please get rid of that girly hammer and get a propper axe or maul......
Pretty serious over compensation here... that little sapling could have been fell with a 24" bar easily..... but hey, what would i know being from the west coast on vancouver island haha... good job!.... for your first tree hahaha
I don't even know where to start i have a tree to take down soon about a 20 incher i hope my video has none of this kind in it with my crew at work. It has a hard lean to it so it will be tricky for sure. Thank god no one was hurt in this maylay of events.
Amateur hour no doubt, not even wearing PPE! Love watching this guy drag that chain through the dirt 🤦♂️
Your correct but not going to lie I want to buy that model chainsaw don’t ask why it just looks bad ass
With ya on that comment. That boy driving them wedges acts like he's trying to cut the tree in half. Real nice saw, but good God ol'mighty gerty. Praying to God at the end of the job isn't when I'd have chosen to ask for help. 😂😂😂
They didn't use ppe when they first invented the saw, why start now.
this guy with the claw hammer is priceless... he might have a heart attack swinging so hard.
Lu
I have a husqvarna 3120K saw with the 119cc 9.2hp engine and I ordered the 60mm piston/ring/cylinder kit on ebay for $85 and installed it easy, just 4 screws right on the top of
the head so very easy to get to. I ported the muffler outlet and added a
2nd exhaust tip and this saw is an absolute beast now. Only problem is
it weighs 50lbs since it's a racine rail products ultra kut 2 but it
costs $2900 and I bought it for only $40 non running and greasy and
rusty. Took it home and added some 2 stroke mix and fuel immediately
started shooting out of the fuel line. Replaced the fuel line and fuel
filter and it started right up so I washed it, removed all of the rust
and polished it up real good and now it looks tough and runs very
strong. This saw is so big that it's impressive to look at just sitting
on the floor of my office. I run it with the top cover off and a k&n
air filter on it because the muffler, head and carb are so huge on this
saw that it looks better with no top cover. I have only $160 total tied
up in this saw including the $40 for the saw, the piston kit and a few
cosmetic parts so I'm very happy with it.
Good job
Holy balls... just when I thought I’ve seen it all! Wedging a buck, and a stump, all while wearing a respirator!!!
Watch "Crane And Tree Work" on RUclips
ruclips.net/video/86TTOIovv1w/видео.html this is what i do today
@@ROD_OF_IRON are you proud for that "Crane And Tree Work" video? you shouldn't
Covid 19
Safety?ruclips.net/video/GuDvDeF9SS0/видео.html
I used cut saplings now I returned to cut the bigger ones ruclips.net/video/GuDvDeF9SS0/видео.html
thanks for the great video to show people how not to be safe and also handle a chainsaw. loved the part where you dragged the bar across the ground back to the truck :)
Cowboys
I run a 4' bar on the 390xp and it will wear you out after a while. You would want to start a workout program to safely work this big saw for a whole day :)
These videos are for entertainment purposes
Nobody-.....
Hammer guy-"I gotta wedge for that!"
Thats why we get the contracts we started cutting sapplings now we return for the biggest in the neighbor hood
*drags chain through everything * wonders why it won’t cut 😂😂😂
Claw hammer guy has actually taken whole trees down with just hammer and wedge...
🤣😂🤣😂
Some say on a quiet night you can hear him hitting 500 wedges witha tiny hammer.
Tap tap tap, then the boom and the crackling of broken power lines and wailing sirens in the distance
WTF. I can't believe someone did not get hurt or killed. UNBELIEVABLE!!!!
🎎
Watch "3120 XP 60 inch bar titanium" on RUclips
ruclips.net/video/Fa0rrT01WrM/видео.html
Watch "Crane And Tree Work" on RUclips
ruclips.net/video/86TTOIovv1w/видео.html this is what i do today
We dont playruclips.net/video/GuDvDeF9SS0/видео.html
First of all, I give dude credit he has good aim with the hammer haha. Secondly, doesn't sound like your saws getting enough to drink on top end at all... Unless you installed launch control and it's just two steppin lol
This dude is the wedge master lol 😂😂😂 also the celebratory handstand on that stump wtf
Adding this to the "what not to do" playlist
Like anything risk = rewards
Miracle the hammer guy has his legs.
This guy has some serious position issues
He is no longer alive accidental death ruled by corner
Seriously. Sooooo sketchy!!!!
Hammer guy is really dead??
@@fadedflow6451
I think he is being sarcastic.
They owe jesus a lot more than just a simple thank you.
Chainsaw Jim thank you for your comment made my day lol
Dont use Jesus name lightly that's my Lord and Saviour
These guys really, REALLY like using wedges.
Saw is very impressive,guy with wedges should get an axe from Buckin Billy!
Good luck getting a axe from him not going to happen
Watching him drag that thing for 50feet at 6:26 killed me
The Fellow doing the video is serving a very long prison sentence
I own the saw
Still the same titanium bar I bought 10 years ago what's not to love
@@ROD_OF_IRON i like the bar, just not the way you drug it on the ground lmao
Nice wedge collection.
ruclips.net/video/GuDvDeF9SS0/видео.html
love that respirator, safety first lmfao
Hilarious...love the fucking respirator and the wedge man...I would hate to see how many wedges they drive when there really necessary......
Very nice video
Thanks
Great hammer...no question about it
Amazing...i like your Video..!!
I really enjoy the videos of Bro. Terrell. Thank you. I haven't finished them yet. God bless you today.😁
I have that same saw with a 14" bar, it's great for limbing, lol
Its a 120cc saw...? Lol i use a 55cc for limbing
Should use a 12"😜
@@fadedflow6451 it's actually 118.8 cc's the Stihl ms 881 has 120 cc's
@@jeffreyharrington5057 actually 121cc lmao jk jk these guys were just ridiculously unsafe
very intelligent people i see...
Wa cây to quá ,tay cưa quá giỏi 👍🏻chúc một ngày mới vui vẻ và hạnh phúc rất vui được làm quen với bạn 😊🔔🌹🌸🌹🌸🌹🌸🌹🌸🌹
well I searched for big saws and came to this clip. So dangerous. The mask, the hammer the length of the bar, the ... oh my
Spettacolo ne ho appena ordinata una per la manutenzione del mio parco
Good work 👍👌 cutting , great saw
Two men working in such close proximity to that chainsaw is very dangerous indeed. Neither one even has any PPE on.
Wonder how he sharpens that saw never mind he drags it
That saw is a good saw
Oh my Lord he is killing that poor saw!
I have ms880 magnum that thing is a bloody beast. I ain't found a tree it cant through yet
big machine but litlle brains
Watch "Crane And Tree Work" on RUclips
ruclips.net/video/86TTOIovv1w/видео.html this is what i do
@@ROD_OF_IRON этот идиот с молотком не мог что ли взять небольшую кувалду , а то стучит по клину как по манде ладошкой .
ruclips.net/video/-FZ09SzUwLw/видео.html thats my buddys 880 magnum 60 inch bar !
big saw little hammer
Stop talking bout ur moms vibrator
Hilarious! That hammer sidekick...
I see alot of rokie mistakes going on here!!just cuz u have a big bad saw doesn't mean u should be using it!
ruclips.net/video/-FZ09SzUwLw/видео.html thats my buddys 880 magnum 60 inch bar ! Some one here is making cabbages
I would have cut it much lower
In the first place
That's what te big saws
are made for
Is this guy really using a claw hammer?! Wow these guys are terrible
A small one at that...
Like stfu no one cares
Why such the overkill bar for??? 36 " would of been plenty
These guys obviously haven't heard of or seen a chainsaw kickback before. Dude hammering in those wedges is gonna end up totally wrecked if they keep that up. Favorite part was the end, watching that guy dragging his chain thru the dirt, who does that?! Lo
LivingCountry He didnt purposely drag his saw on the ground. The man had his hands full give the man a break, geez!
Jokers ! Nice saw. However it's 4 strokin under load. Imagine if it was properly tuned.
Amen
The hammer😂😂😂 with mask, without helmet 😂😂😂
I HAVE A HELMET BUT YOU CANT SE IT ephesians 6 Kjv bible
This is my favourite job 😁😁
He's getting paid "per wedge", give "claw hammer dude" a break. Oooo!! I just saw a hand stand!
ruclips.net/video/ZG0qiJNQSUQ/видео.html this is a white oak tree
I started out cutting saplings now i return for the cheeseruclips.net/video/71TfCF-4Aak/видео.html
Ouch. That chainsaw deserves a good home man. If my 3120 was being dragged along the ground with the bar in the dirt like that by Mr Midget Felling Co. I would lose my shit big time.
That's one of two 3120xp husqvarna polished and ported
What in the SAM HELL?
These guys are dangerous.
Good work!
Thanks this is hard work
@@ROD_OF_IRON yes! I love big chainsaws! Its sound is awesome!
What the heck did I just see! I can't believe nothing went wrong there. More motor than brains in all combined! Guess the guy with the camera was praying the whole time! Lol
The fellow with the claw hammer is dead in a non tree related accident
The fellow who had the clawed hammer is no longer alive
He seemed like a good person, Rest In Peace ...
Two Barbie lumberjack , gloves and mask wtf !!! 2 delicate ladies 🤣
Wybacz im panie gdyż niewiedzą co czynią 🤯😂🤔
Is that a claw hammer from the craft room?
The tree was winched over 9,500 warn winch ,measured from base to top to exact place it fell just short of power line because we did not want to dispatch power co
Oh my GOSH!!!! This cracked me up so bad. This was supposed to be a spoof right?
Крепкий парень!
These two have a touch of the downs
Mate!!! Where did ya get that axe / smallest hammer in the world from?
Any word yet, are these guys still alive?
Still going strong but hammer man is decreased
Big guy with little hammer!
good saw s !!!!
Couple of guys giving it a go Well done
Gosh !! ... more wedges than Kellogg's has Corn Flakes !
I really dont see why these guys are getting so many negative comments.Yes ,replace the claw hammer with a 4 pound sledge,but hell,the tree went down where they wanted it.Nobody was hurt,and Im sure they cleaned up the mess and got their money.There are 2 kinds of people in this world.Ones that go get it done,and ones that set watching youtube videos criticizing those that actually have the gumption to do it.Id say 4 out of 5 of these critics couldnt even start a chainsaw,much less carry a beast like that 3120.And for the guy driving so many wedges...hell,he is getting paid,he may as well do something.
Lol...I guess...and I am a logger
@@wooge3199 or at least you play one on youtube
@@pallmall5495 yeah ...so do u
@@wooge3199 nope,that works to tuff for me.I dont even want to pretend Im a logger.
@@pallmall5495 cool man....
Inexperienced shows on your sleeves guys. Be safe.
Gay.....
David Greiner lmao SUPER GAY
Watch "Crane And Tree Work" on RUclips
ruclips.net/video/86TTOIovv1w/видео.html inexpensive shows up in the wallet
Cut this with your 395xpruclips.net/video/GuDvDeF9SS0/видео.html
No buddy gay out here we Brother's
Stump cut is always the last cut. No bucking Billy! Lol
Husgvarna,👍👍👍
Is this a competition of some kind? :D
Need to open the high jet a little more. When a saw is running at 13 14k rpm and it sounds 4 stroke your going to kill it... yes that’s a big ass tree. But could’ve been done with a bar 2 foot shorter
I LOVE how at the end the guy plunges the small saw into the stump and leaves it.. and then dude drags the chain thru the dirt....smh.
There is no high side adjustment on a 3120 its a fixed jet
the albo is high but the chainsaw is powerful
Husqvarna is the best
What did I just watch? Get some training before you get hurt.
I guy told one time take a chance because a man that never had chance because he did not take a chance ruclips.net/video/GuDvDeF9SS0/видео.html
@@ROD_OF_IRON you suck at speaking english
you sir ! got really scared when that tree started going! never seen a man shake that hard with a saw in his hands @1:40. and please get rid of that girly hammer and get a propper axe or maul......
Looked like he was pissing his pants
Did he really need to get in those last cuts?
Pretty serious over compensation here... that little sapling could have been fell with a 24" bar easily..... but hey, what would i know being from the west coast on vancouver island haha... good job!.... for your first tree hahaha
Very good lads
Luar biasa mantap👍
I don't even know where to start i have a tree to take down soon about a 20 incher i hope my video has none of this kind in it with my crew at work. It has a hard lean to it so it will be tricky for sure. Thank god no one was hurt in this maylay of events.
knuckle boom loader, can do one load logs and all
to big bar to small hammer and using mask for what?
He likes the way it makes him sound when pretends that the 3120 says to the 555, "I'm your father 555" :fade to deep Darth Vader breathing....
probably a dust allergy
Krezuba Zver can never have to big of a bar. Big Bars mean Big Chains.. Big Chains mean Big DANG A LANGSSSSS
Clueless
Fine dust can get into some unlucky people's sinuses, the mucus doesn't flow and then the bleeding starts.
I sometimes have that issue. :/
Thank you for this wonderful felling!
First leaving a 2ft stump...then cutting it after the tree cut ????
The legendary get er done boys!...lolo,ol...claw hammer....priceless
So what was the point of putting all the wedges in the stump? Oh that’s right to make sure it falls the right way.
Hi.. i'm from indonesia..
I am also a woodcutter in indonesia.. 🙏🙏🙏
Right show send some more video
They do make sledge hammers for that job.
J S Lawn Service. They didn't even need wedges
Lam dai the
the 3120xp saw is too good,invite you to play
This was the tree I cut today Nick ,post your credentials?
Bought that bar just for that tree.
Do you guys have a card?
Some people run wedges more than a run the saw
This video pains me immensely
ruclips.net/video/-FZ09SzUwLw/видео.html thats my buddys 880 magnum 60 inch bar ! Cabbage time
That’s not an 880, maybe a 3120
You have no videos on your channel show your power saw
Pain is Gain
Another 18 inch from the bottom of that tree on the log lengths would have been worth the top 20 feet.
Why the wedges if your pulling with ropes?
Guys, thanks be to the most high you finished without harm...smh!!!!!!
Deleted scene from Funny Farm?
Health and safety nope just the good lord with us today.lol
Don't forget ur helmet and crayons fellas!!!
This makes for a good comedy
Watch "Crane And Tree Work" on RUclips
ruclips.net/video/86TTOIovv1w/видео.html no safty ? This what we do
Entertainment purposes only
Hey, y'all ever try usin' a wedge?