Thanks for reviewing this, I have the mobula 8 analog and I can confidently say it freestyles almost like a 5 inch. I actually have had it at 70% throttle limit because I've been using it in my backyard and its just crazy powerful lol. I was thinking about getting the pavo20 pro for a trip im taking to india where I need a sub250 with 4k quality but still the ability to handle wind and high-up shots. I would definitely say to try out the mobula 8 if you want another whoop.
can i ask what kind of tape you are using on the prop guard area to help with the light bar and antenna adhesion? ive seen it on a few peoples reviews and wanted to scoop some up. thanks for any info!
Thanks for the great video 😁 i just ordered this frame 😁 a blue one with extra 03 mount and prop guards. I will use a speedybee f405 40a AIO with the 03 air unit. I have a few different small motors to choose from. 1603, 1505, 1804 or i have a set of 1303 rcinpower on my YMZFPV starship X1 that has burnt aio 😉 those 1804 were only $20 for 4 from betafpv 🤯 low kv so i will need to make that higher cell count. Idk always building 😁 love my speedybee35 😉 a beast 🤯😁 diy custom too. Axis flying argus f7 aio and 2205 xings
Hey brother,I have a big question, what rates do you use with this drone to make indoor cinematic real state? Like the one you show in the video. It seems really really smooth. Thanks in advance
Im having an issue where my modes are stuck in AUTO and i cant assign any buttons (DJI Controller 2) which i think is leading to a remote control error anyone else experience this?
@@JonnyTrego I did that but still was not working, just to find out I assigned the wrong pad from the AIO in CLI. My Pavo20 Pro came with the soldered yellow wire, from the LED cable, on pad T6 (or TX6 when you execute the resource command in CLI) so when I identified the correct ID for pad T6 I reassigned with PINIO. So now works perfectly.
im planning to learn on this, maybe ill put a throttle limit lol, i was trying to learn on the Neo but i found it to be under powered, compered to the avata 2, and thats too big... so ordered one of these and 03 unit
I wanted to like this one, but it constantly comes loose and shudders. As the gummies get compressed, the extra vibration leads to uncontrollable throttle and potential flyaways. The propellers cut into the batteries, and my flight times are absolutely terrible. I'm averaging about 2 minutes if i try to do anything remotely fun with it.
No installing gummies is easy. It's connecting UFL connectors and disconnecting. They always break or bend. Walksnail Moonlight u.f.l connectors is the hardest thing to put on
Thats no freestyle brother at least not enough freestyle for testing. Make at least a proper S turn or a proper powerloop but not even that was to see. I Freestyle and i got the Pavo20 pro and its not bad but definetly needs a Tune for acrobatics. You Definitely feel that its a bit heavy but considering having the o3 and allowing 2/3s its Completly fine. For me many of you youtube maybe can fly but not flying good. You better look some Nick Burns who knows how to test the right way Your cutting is nice
I appreciate the feedback! And i completely agree I didnt push this drone. One of the things you do have to take into consideration is that companies send these drones and have deadlines on when the review needs to be done by. So if i push the drone and break it while testing it, Ill either delay my review or have to pay for parts in order to complete the review. That being said, I do agree that I couldve flown this drone harder and made sure to show actual freestyle maneuvers. So for me what I am going to start doing is getting then basic video completely done of what I absolutely have to have in order to get the review and then absolutely sending the drone after all the filming is done so i can demonstrate how someone would fly if they werent scared of breaking it.
@@JonnyTrego Not trying to be rude but I agree with the first dude. Get some cinematic flying out of the way and then send it. Or else don't constantly say you are freestyling and the title of your video is literally a question saying "Can it freestyle"? You say, "okay now I'm going to..." and then all you do is pull out of a dive? Then you say, "Let me try one powerloop" and you pulled out early and didn't even complete it! I watched your whole video and I have no clue if it freestyles or not.
@@superdstar2001 I appreciate the feedback! For the longer response look to my other reply on this comment but will work on it and try to do better next time!🙏🏼🙌🏻
Damn man.. new to all this.. bought this drone to learn with.. soon as I barely touch throttle shit flies off WAY too fast for me to control. I turned it down to 40%.. still way too fast. I dont know wtf is wrong with me.. I guess I have to learn to move the joysticks at nanometer movements.. cause I am barely moving them and this thing just is WAY too fast for me as a noob. Been told many times need to learn to use very minute adjustments and I have BARELY moved the sticks and its no where NEAR as slow as this on take off. I figured I could fly it around slowly but nope. Then the stupid pin on the USB bent so now I cant even program the damn thing.
I know this a drone review but being a tattoo artist I couldn’t help but notice the ‘pray’ tattoo I’m subscribed just cuz of that 💪🏾
Thanks so much for the love! I got it about a year ago and i love it! its a good daily reminder
Awesome video as always bro. Bring on some more reviews and comparisons 😎
Thanks so much man! that is the goal!
This best whooppppp right now
I am waiting for mine to come next week.
Thanks for reviewing this, I have the mobula 8 analog and I can confidently say it freestyles almost like a 5 inch. I actually have had it at 70% throttle limit because I've been using it in my backyard and its just crazy powerful lol. I was thinking about getting the pavo20 pro for a trip im taking to india where I need a sub250 with 4k quality but still the ability to handle wind and high-up shots. I would definitely say to try out the mobula 8 if you want another whoop.
I think it’ll be perfect for ya! It’s a work horse for sure and handles super well! I’ve got the Mobula 6 and I’ve been having a blast with it!
I fly mine inside stop throttle limiting
@@Spacecadet3890 Im happy for you buddy, not everyone has the same capabilities as you.
How you gonna claim its as good a 5" then say you need throttle limit@ojasvisuals
can you mount a action cam?
I’m sure you could, like an insta360 go 3 but it doesn’t come with a mount so you would have to design something yourself
Its not worth it at all since the o3 gives you better quality than any action cam at that size and weight.
@@ojasvisualsgo pro better
Thinking about getting one next week myself
You should! You won’t regret it!
can i ask what kind of tape you are using on the prop guard area to help with the light bar and antenna adhesion? ive seen it on a few peoples reviews and wanted to scoop some up. thanks for any info!
Its called Fabric Electrical tape. Here is the link to what I bought: amzn.to/3ZeNsts
Great video. Definitely going to get one of these.
Thanks so much! you absolutely should! its a blast to fly
@@JonnyTrego I did it 😆 should be here any day now.
Great review man!
Thank you so much!🙏🏻
Thanks for the great video 😁 i just ordered this frame 😁 a blue one with extra 03 mount and prop guards. I will use a speedybee f405 40a AIO with the 03 air unit. I have a few different small motors to choose from. 1603, 1505, 1804 or i have a set of 1303 rcinpower on my YMZFPV starship X1 that has burnt aio 😉 those 1804 were only $20 for 4 from betafpv 🤯 low kv so i will need to make that higher cell count. Idk always building 😁 love my speedybee35 😉 a beast 🤯😁 diy custom too. Axis flying argus f7 aio and 2205 xings
Hey brother,I have a big question, what rates do you use with this drone to make indoor cinematic real state? Like the one you show in the video. It seems really really smooth. Thanks in advance
just ordered it bro
Oh Heck yes🥳 youre gonna love it!
Im having an issue where my modes are stuck in AUTO and i cant assign any buttons (DJI Controller 2) which i think is leading to a remote control error anyone else experience this?
You need to assign the different modes to the buttons or switches for it to work. I think 🤔.
Betalight, assign modes. Save. Restart.
How did you manage to turn off the led strip, been trying for few hours and no solution. Great review though. thanks!!!
It’s the aux1 channel, or user 1, when you go to set up the modes, every drone that has led always had a led toggle but it doesn’t work.
@@JonnyTrego I did that but still was not working, just to find out I assigned the wrong pad from the AIO in CLI. My Pavo20 Pro came with the soldered yellow wire, from the LED cable, on pad T6 (or TX6 when you execute the resource command in CLI) so when I identified the correct ID for pad T6 I reassigned with PINIO. So now works perfectly.
im planning to learn on this, maybe ill put a throttle limit lol, i was trying to learn on the Neo but i found it to be under powered, compered to the avata 2, and thats too big... so ordered one of these and 03 unit
Anyone knows if it's compatible with Avatar HD Nano Kit V3 or other Walksnail products?
Would this be too powerful to fly some freestyle inside?
depends on how big the space is, but I wouldnt do it in my house
Ohh sorry, got my answer, Rate Profile 2 for indoor flying right?
yep! I just have different rate profiles programmed to a switch
I was thinking about getting one but it takes like a month🤦🏻
rate profile adjustment... u can use only 1 row instead of 3... make it all yellow (900-2100)
I wanted to like this one, but it constantly comes loose and shudders. As the gummies get compressed, the extra vibration leads to uncontrollable throttle and potential flyaways.
The propellers cut into the batteries, and my flight times are absolutely terrible. I'm averaging about 2 minutes if i try to do anything remotely fun with it.
No installing gummies is easy. It's connecting UFL connectors and disconnecting. They always break or bend. Walksnail Moonlight u.f.l connectors is the hardest thing to put on
I havent messed with walksnail but any of those connectors are annoying.
Ufl, how about vtx camera coaxial cables, I'm still not sure how exactly those should be unclipped
Will this work walksnail
Yes! with the included bracket it will work
Slide on props? wild
it really is! Just gotta make sure you always have extra props with you
Thats no freestyle brother at least not enough freestyle for testing. Make at least a proper S turn or a proper powerloop but not even that was to see.
I Freestyle and i got the Pavo20 pro and its not bad but definetly needs a Tune for acrobatics. You Definitely feel that its a bit heavy but considering having the o3 and allowing 2/3s its Completly fine.
For me many of you youtube maybe can fly but not flying good.
You better look some Nick Burns who knows how to test the right way
Your cutting is nice
I appreciate the feedback! And i completely agree I didnt push this drone. One of the things you do have to take into consideration is that companies send these drones and have deadlines on when the review needs to be done by. So if i push the drone and break it while testing it, Ill either delay my review or have to pay for parts in order to complete the review. That being said, I do agree that I couldve flown this drone harder and made sure to show actual freestyle maneuvers. So for me what I am going to start doing is getting then basic video completely done of what I absolutely have to have in order to get the review and then absolutely sending the drone after all the filming is done so i can demonstrate how someone would fly if they werent scared of breaking it.
@@JonnyTrego Not trying to be rude but I agree with the first dude. Get some cinematic flying out of the way and then send it. Or else don't constantly say you are freestyling and the title of your video is literally a question saying "Can it freestyle"?
You say, "okay now I'm going to..." and then all you do is pull out of a dive? Then you say, "Let me try one powerloop" and you pulled out early and didn't even complete it! I watched your whole video and I have no clue if it freestyles or not.
@@superdstar2001 I appreciate the feedback! For the longer response look to my other reply on this comment but will work on it and try to do better next time!🙏🏼🙌🏻
Bro didn't bother to mention he hadn't flown manual until after he's in the air 🤣🤣
Damn man.. new to all this.. bought this drone to learn with.. soon as I barely touch throttle shit flies off WAY too fast for me to control. I turned it down to 40%.. still way too fast. I dont know wtf is wrong with me.. I guess I have to learn to move the joysticks at nanometer movements.. cause I am barely moving them and this thing just is WAY too fast for me as a noob. Been told many times need to learn to use very minute adjustments and I have BARELY moved the sticks and its no where NEAR as slow as this on take off. I figured I could fly it around slowly but nope. Then the stupid pin on the USB bent so now I cant even program the damn thing.
I would suggest getting some more practice in a simulator. Especially if you have limited the throttle to 40% and it still feels like too much for you
Solder a new one in its a skill you gonna have to learn or pay someone to do and be in this hobby
When you get rich i want a ps5. With a disc drive
I don’t think it works like that😂 but I’ll keep that in mind lol
Whats a gummy?
its kinda like a spacer that isolates the vibrations from the drone so that it doesnt effect other parts
The video stabilisation makes it look weird at points.
Yea thats my fault, I didnt setup the camera properly before flying so a few of the shots are a little messed up