The BEST Tire Carrier for the GX470! - Holds a 35-inch tire! JW OffRoad
HTML-код
- Опубликовано: 28 авг 2024
- In this very long video, we show you the newly installed JW OffRoad tire carrier. This tire carrier is perfect for the GX 470 because of the way the rear door opens. If you decide to run a big tire like a 34 or 35 inch tire, you will not be able to mount it underneath the truck. The JW OffRoad tire carrier holds up to a 35-inch tire and is high enough so you don't lose much departure angle.
Support the channel, get the extra length wire, butt connectors, and other needed components when you purchase with the link below.
JW OffRoad Tire Carrier for GX 470:
runnin4tacos.c... 
Авто/Мото
I have been working on military aircraft for 25+ years. I work on my cars, motorcycles and anything else that needs to be worked on. I have to say you are an extremely good mechanic/technician. The precision and speed at which you work is impressive. These videos amaze me because of the way you teach. I learn a new technique every time I watch one of your videos. Amazing work man. Great Job!
Omg! The work required! I’d just bring my GX470 (if I had one) from Seattle to you guys. Pros.👏
I would rather drive from GA to CO to have you guys do this than bother myself... good lord.
Колонки в задней двери? Класс! Не знал что в лексусах настолько круче чем в Тойота прадо 120... Хорошая работа! Молодец!
Really like my JW carrier. Although I wouldn't mind getting a swing out carrier in the future. Currently have 33s mounted but if doing seriously rack crawling or mud I'd unmount my tire and put it on my roof rack so it doesn't cut too much wear.
Ps: I'm on my mom's account lmao
That mount is known to wear the door hindges on the GX470. Its too much weight for that door.
I've had mine on for 2 years with a 33 inch tire and gas cans attached to that with zero issues. No cracks, no weird closing issues, or squeaks while off-road.
@@adecarlo29411 good to know !
Great for light offroading or mall crawling. Id be careful though hitting departure angles and sheering it off dragging the spare across a rock or something.
They make shims for the hinges to take the added pressure off.
@@BradleyJokerst where?
This was one of the most annoyingly painful installs I’ve ever done. But thanks for the video. Couldn’t have done it straight from the JW directions.
Really guys the JW spare tire carrier is the worst tire carrier on the market, just wait until your door starts to sag so amuch its a job to shut your door and you will really enjoy the squeaks you get while driving, I couldn't give mine away. Find and endorse something that really works. This was on my 2009 GX 470 with 315 70X17 tires with Method wheels.
Info on the sleek high clearance rear bumper tow hitch please!!
I have the exact same GX. Which angle neck did you buy? Straight or 8 degree angle? I'm assuming you chose the texture black color
Would that heavy tire cause accelerated wear on the rear door hinges?
I wish they made something like this for the 4th gen 4runner
Why? Our lift gates go up? You want to lift an extra 50-70 lbs? Swing outs make much better sense on a 4runner
Orrr u could buy a lil Amazon light and use the best wire set idk to power maybe a led stars in the back or something solar, etc!
too bad the 4runner doesn't have an option like this. the door swings the wrong way lol
I'm having an EXTRA gas tank put in the wheel well where the spare usually goes- and the two hooked as one to give me 56 gallon capacity instead of 23-- which will give me about 800 mile driving range before filling up again.. (and an armor plate to go OVER the tank as extra protection against puncture.) BUT I prefer a RIGID trailer hitch mounted tire swing. Better visibility- and the offroading isn't effected-- as i don't do rock crawling etc. anyway.
Where did you get the paper template for the holes? I can't find it on their website or yours. Thanks. Great video. Can't wait to try installing my new tire carrier. Although we've already changed out the back bumper and ccut part of the4 frame, so not totally sure how we're going to mount the strike plate.
Any idea if this is better than the door carrier that Bison Gear offers?
I’d love to know what those drill bits are called - I need those…
Vortex-point drill bits
Are you going to make that same high clearance rear bumper for the gx460? Take my money.
What about ordering the door from the Toyota Prado ?
How will those door hinges handle that weight?
They are very strong metal hinges. We have not had a problem at all.
Printed out the template and the left hole is off by a 1/4 inch pretty sure I'm printing actual size
which one is it from the link? there's 4 different ones.
Whats the difference between Bundle 1 & 2?
Will you guys carry the 460 version?
Easily not the best tire carrier for a GX. The rear door wasnt designed to carry a tire.
If you want to carry an full 35" spare. In the back on or a roof rack. Your rear hatch is not the answer.
That’s funny bc the prado comes with a tire on the gate.
@@vw2vtec funny how it's from the factory and designed for a stock tire size. The gx470 isnt a prado. Its based off the prado/4 runner. How dense are you?
Putting a 45lb+ tire on the dx rear hatch will eventually make the door sag and cause closing issues.
Pretty dense apparently. They have shims for the hinges and the tongue that mounts to the body aides with the weight. You don’t have to buy one. Some people like to open a swing out every single time they need into their gate, the rest of us went with a gate mount. Cheers mate.
@@j.p.3972 again, JW sells shims for the hinges, and there’s a tongue in the jamb that assists with closing.
It’s far from perfect, but it works for most everyone that buys it….or they wouldn’t sell any.