Great looking bumper for the GX! Been wanting a similar thing for the LX as every other option on the market is a full heavy replacement. Would love to see you guys develop one for the LX570 as they are getting older and the overlanding market is taking off.
It looks cool! You should design a bumper that has towing in mind. Something that utilizes all the factory bolt on points of the OEM GX470 hitch. PT22860540. That way you keep the 6500LB towing capacity and have the high clearance. I'd buy it in a second...
This bumper appears to have the proper amount of attachment points to the factory frame just like the OEM tow hitch. This should in theory be capable of towing 6500lbs, they just don't say it for liability stakes.
Looks really good, been waiting a while for one of those. How much space is between the edge of the new hitch receiver tubing and the rear frame x-member? Running a tire carrier like a RigD can stick out a little bit past that inside edge. Also, what's the approx weight?
Is that hitch tow rated at all or is it primarily only good for recovery at this point? I like the look of it completely but I need to be able to tow a travel trailer
It does. Bolt holes are identical to the Lexus. Something to think about though is the rear bumper on the Prado breaks up into 3 pieces. I've done a bumper cut like this and it works, just a little bit more work than the GX bumper. A lot more screws than what they demonstrate. I'm Currently making my own, like the one in this video. It's such a great option as a lot of companies have stopped making/ suppling rear bumpers for the 120 in my country. This is largely due to a) demand and b) the rear bumper on a prado is chunky and it hides a lot of weird crap which made it a bit complicated to mass produce.
Is the bumper tow rated?
Great looking bumper for the GX! Been wanting a similar thing for the LX as every other option on the market is a full heavy replacement. Would love to see you guys develop one for the LX570 as they are getting older and the overlanding market is taking off.
Definitely need one for the 5th gen 4runners!
I don't think we will be doing one for the 5th Gen because there are so many great companies out there that make cool bumpers already.
@@Runnin4Tacos do one for us 4th gen guys with a tire carry and gas can carrier too
It looks cool!
You should design a bumper that has towing in mind. Something that utilizes all the factory bolt on points of the OEM GX470 hitch. PT22860540. That way you keep the 6500LB towing capacity and have the high clearance.
I'd buy it in a second...
This bumper appears to have the proper amount of attachment points to the factory frame just like the OEM tow hitch. This should in theory be capable of towing 6500lbs, they just don't say it for liability stakes.
You dont keep the 6500lb towing capacity if you lift the vehicle anyways.
Looks sick! I have a full rear bumper from metal tech but my exit angle is nowhere near as good as this low profile bumper.
Love the look, but would probably prefer something with a way to mount a spare tire. Going off-road with only four tires makes me nervous!
Need one just like it for the 5th gen 4runner
The bumper would have been sweet if it had protection for the lights. Looks like you'll lose a light at first drop off.
I was wondering if you guys can make this for 5th gen 4runner
U have for gx460???
I wonder if this could fit the 4th gen 4runner
you guys gotta make a 5th gen 4runner version
Where does the trailer wired pin attached? Thanks for a great install video, the bumper looks low profile.
Show more of the FJ Build and products please!
Would you like to see more install videos or Trail videos?
Looks really good, been waiting a while for one of those. How much space is between the edge of the new hitch receiver tubing and the rear frame x-member? Running a tire carrier like a RigD can stick out a little bit past that inside edge. Also, what's the approx weight?
Love it! Is it still compatible with a LRA auxiliary tank?
Is that hitch tow rated at all or is it primarily only good for recovery at this point? I like the look of it completely but I need to be able to tow a travel trailer
Most aftermarket companies aren’t going to officially rate their bumpers due to liability
Need one for the 2nd gen sequoia
I wish this was available for the 460
This is super cool!
I need one!
Is there any reason this wont fit on a Fj Cruiser?
Any discount code for for Black Friday on the bumper ?I’m on the east coast 😅
Can you make it for tire carrier and Jerry can that would be perfect.
1:51 what’s that black trim stuff you used ?
All this shit people put on their trucks...but I like it!
Is there a bumper for the GX 460? 2014+
4th gen bumper please
It looks like the light pods are in a pretty vulnerable location. Any plans on adding protection around it or alternative mounting locations?
My first thought too, those will break on the first rock they hit
They are pretty exposed. We are thinking about adding tubes around it.
@@Runnin4Tacos Will you guys be making revisions to this anytime soon to tube around the lights? Also what is the weight of this bumper?
how much do these weigh in at?
GX and 5th Gen share frame, that cross member looks exactly the same, anyway this would fit a 5th gen with some modification, or the bolts wont align?
The bolts and also the bend on the tube will not line up.
@@Runnin4Tacos Sound like you all need a 5th gen version! I know I'd buy one!
Gx460 version coming soon?
GX470Can I buy a hitch dog?
GX460?
Will this fit a 120 prado
It does. Bolt holes are identical to the Lexus. Something to think about though is the rear bumper on the Prado breaks up into 3 pieces. I've done a bumper cut like this and it works, just a little bit more work than the GX bumper. A lot more screws than what they demonstrate. I'm
Currently making my own, like the one in this video. It's such a great option as a lot of companies have stopped making/ suppling rear bumpers for the 120 in my country. This is largely due to a) demand and b) the rear bumper on a prado is chunky and it hides a lot of weird crap which made it a bit complicated to mass produce.
Very NICE!!! is this for sale?
No, But our 4runner is up for sale.
@@Runnin4Tacos LOL im good. im doing mods to a GX470
What lift, wheels and tires?
Dobinsons 3 inch. 35-inch tires.
What did you do to fit and clear 35s
@@supe0547 Body Mount Chop and trimming. At least that is what it took for me. Nothing crazy.
Why don't you turn a VW into a overlander since any vehicle is turn into one