I Bought The WORST Sniper Rifle Ever - Big Mistake!!
HTML-код
- Опубликовано: 11 фев 2024
- Buy A Pair of Rubbers For A Chance To Win $1000 IN CASH!! - googansquad.com/products/topo...
USE CODE LUNKERS TO SAVE 10%
Follow ME ON Instagram - / lunkerstv
► Subscribe Here - bit.ly/SubtoLUNKERS
► Googan Monthly Shirt - bit.ly/Monthlysubscription
- - - FIND ME ON SOCIAL MEDIA BELOW!! - - - -
► INSTAGRAM → / robterkla
► TWITTER → / robertterkla
► FACEBOOK → bit.ly/FacebookLunkers Спорт
Buy A Pair of Rubbers For A Chance To Win $1000 IN CASH!! - googansquad.com/products/topo-deck-boot-grey
USE CODE LUNKERS TO SAVE 10%
Report... fake
Picatinny rail, is the name u were looking for.
The Googan rubber don’t come in my size😩
I need a pair sizes 14 lol
if the video get 4 thousand likes @lunkersTV will send me the rifle as a birthday gift
The Styer Scout is not a sniper rifle. A scout rifle is designed for medium and short range. A scope with a long eye relief and low power is ideal for a scout rifle. The scope should be mounted on the picatinny rail on the barrel. Scout rifles are popular for hunting.
That's the older style weaver rail system not picatinny
@@roryhennessey8836 I think you’re right. Honestly I can’t tell the difference between the two, they look similar.
@@Will97675 Picatinny basically took the Weaver system, made it metric, and standardized it under MILSPEC so different contractors wouldn't be using different mounting systems.
@@roryhennessey8836 weaver is just thinner lines, so weaver mounts fits picatinny rails. But not the other way around. But most makers of scope mounts make them in weaver size to fit all.
Never thought i would see someone refer to the scout as an awful pawnshop gun
If you think it's a long range sniper rifle, it's gonna get very bad reviews. Of course, it's built for the exact opposite type of shooting. It's specious made for super fast shots on potentially dangerous game from point blank out to medium range at most.
It's designed to be shot with a scout type low power optic and to have both eyes open for situational awareness.
This is really frustrating. The quality of the scout is great when used for it’s designed purpose. This is such a bummer from Rob.
But that bipod is ridiculous for a gun that expensive lol, that need’s to be re-designed so badly
Ah the Steyr Scout, one of the craziest creations by Colonel Jeff Cooper which was initially developed for hunting game on the plains of Africa. It was a rifle that tried to tick every box and in doing so ended up ticking none of them. Just a heads up Rob, but that rifle was designed to be used with a long eye relief, mid powered, scout scope and not the long range scope that you mounted on it. It was supposed to be a lightweight and maneuverable rifle that you get on target fast.
A man of culture i see...
I’m glad somebody knew what this gun was intended for. It’s not a terrible gun for the use it’s intended for. Light firearm for both eyes open shooters for possible dangerous game situations where you need a fast follow up or defensive shot. Also right about it not being executed perfectly.
You and I should drink some expensive whiskey or brand and smoke $12 cigars together. Don't worry I'm buying
reason he got the wrong scope is because he used backwater american logic, "looks like a sniper rifle, so must shoot far because thats what my other rifles do"
@kevinmorrice maybe, he also was an actual sniper I believe.
It's a scout rifle jeff Cooper cam up with the concept. Should have a low power optic with long eye relief on the front.
Styer Scout is an awesome hunting rifle. Lite as heck and easy in the bush. Not a Sniper rifle by any stretch. Yours came with no optic so you didn't get the joy of using the weak optic it came with. Put a reasonable optic on and its solid at medium ranges. The only real drag is the crazy recoil. Its so lite it puts all the recoil on the shoulder. Try the Styer SBS heavy tactical if you want a longer range Styer. Heavy.
How dare you insult the Steyr Scout rifle.
why did he think it was a sniper rifle ? the scout concept was fairly clearly not a sniper
You were robbed , you can get MDT 308/6.5 Creed mags for $80 all day long.
It always cracks me up, I can open carry all day long in Walmart, as soon as I start recording on my phone or camera, they go nuts!
Facts 👌
it is designed for a scout scope buddy, you should have watched Garand Thumbs review on that before you bought that "thing" lol
The whole purpose of this video is buying weird shit he isn't familiar with.
@@goodrobot1 yeah I get it but any scout rifle is a hard pass lol
Brotha, they used to take muskets consistently out to 800-900 yards. They have newspaper articles depicting the hits at competitions in the 1800s
Whitaker muzzle loading rifle
They consistently hit a barn door
Styer is the same folks that make the AUG. Very innovative combat technology
it may not be the best rifle, but its a rifle that just works
Yes! Once the barrel gets hot the internal diameter changes allowing some of the force to leak past the bullet. So therefore causing less momentum which equals less accuracy. 2014 physics exchange. And I am very proud to say as a female shooter I actually did my research on this because I was flustered with my groupings after shooting 100 rounds down range. My spouse teased me in regards to it as we are very competitive when shooting!
The Scout is an Amazing rifle.
It's meant to be used with a long eye relief scope like you would use on a revolver.
I'll be happy to take it off your hands and even pay shipping if you don't like it. 😉
I have a Savage with the barrel touching the stock. I wrapped sandpaper on a piece of a broomstick and took off material wherever the barrel touched the stock. It went from a 2-inch group to a 1-inch group.
I dont know how but with all the yapping by Rob, it makes for entertaining videos 😂
Love watching you sight in different guns the way you did this vid Rob 👍🏽👍🏽👍🏽
I've noticed in every long distance shooting videos you always say I should take another shot to make sure but you don't and say it's good I'm confident in my ability. Then they always end this way, not hitting the spot and saying it's the scope or something lol
He's fucking with you. The state won't get mad at him. He just wants to protect his business is all which i completely understand
Your rounds will string out as your barrel heats up but also as you foul the rifling I the barrel it can also affect the groups so you’re point of impact can change from a cold bore shot compared to a hot rifle or dirty gun
Almost all of our factory rifles we shoot long range with you have to take a dremal and bed/float the stocks to keep from barrel touch! Composite stocks have so much flex it’s a must to dig them out for barrel clearance!
I'm not a fan of the steyr scout bc of the bipod. But, if you keep it, I'd fix the irons (even if you get the proper scope for it).
Edit: yes, when your barrel gets too hot, you will get different strings of fire. I prefer an AR platform for coyotes but either way, if you shoot slowly, it won't heat up as fast. For hunting purposes, I'd recommend going with your cold bore zero
One of the biggest things I've noticed on my 22-250 and 220 Swift that effect accuracy is copper fouling. With the crazy velocity those things push they let a lot of copper in the barrel.
Great videos from army vet to vet keep it up brotha I ordered a pair of rubbers for my dad and myself , I would love to come shoot long range with you and bounce knowledge back and forth
it also has a magazine disconnect, you can press the 2 magazine tabs when its loaded and drop it down by 1 position and single load rounds and then push the magazine all the way in for "rapid fire"
Need Gabe with a spotting scope next to you looking at the target with the camera attachment so we can see both you shooting and the target
Rob I just want to let you know that Matt is killing it 🇺🇸🫡
Killing it? He is struggling dude. Rob left him out to dry.
Nah Matt's 👍 hope to see rob back sometime though
If you knew the actual features and how they function you might actually like the rifle. The 2nd position on the safty allows you to run the action while on safty. If you are lucky it will be the version with a set trigger. I would have snatched it up for 1300 they are great rifles. I will not leave a like because I would hate to see a Steyr destroyed.
He should watch the Garand Thumb vid on this rifle. He explains the purpose of the three position safety, etc.
Hey Rob, I’m looking at sights for my gun and still haven’t decided what to go with. Do you have any suggestions?
the only things wrong with the scout is the bipod could just have a detent. you bought a scout sniper that more likely to be a trail/safari gun rather than a actual sniper and go like.
-It's light
"it punches the hell out of me!"
-the mounting solutions were meant for lower power scopes for fast target acquisition
"I can't mount any high powered scopes on it!"
also I don't think that not being about to manipulate the bolt unless is on fire is fine to me.
Rob has no idea the fanbase this weapon has!!! They are all after him now lmao
Put a damn acog on the Scout your supposed to know that Rob
Lol
Rob got the dope with the steyr, Gabe nails it first try 😂😂
"I'm 4 foot high" "ohh okayy good" lol. Damn.
Your action is relaxing into the chassis. Re torque scope and chassis if that doesn’t work glass bed the lug to the chassis. It helps with harmonics. Your chassis being properly fitted and torque has a lot to do with it. You can bed the scope mounts also and lap the scope rings
That rifle needs a long eye relief scope.
If you let the barrel run super hot might need a clean. The can could of come loose a little. Something barrels take 100 rounds to settle in. I've slipped rings on scopes and it doesn't take much to move the turret. Lastly check your action screws
Great weapons ❤ always good too see gabe silent but obviously knows his stuff
being an employee at a pawn/gun shop my boss doesnt like the public filming the guns ESPECIALLY the local news or whatever. last time they were in the guy was just like "i just want to take a few shots of the guns and no one else will let me" so me and my co worker were like sure dude go for it. guy was in for like 10 minutes and just basically filmed b roll. but my bosses reasoning was that they tend to use footage on negative stories and then your business in turn gets demonized for no reason. i also think people have this idea that pawn shops sell guns on the "shady" side as opposed to any other ffl which is fair cause pawn shops are kind of looked at as predatory or shady places in general when in reality, we have an FFL, we turn our serial numbers, pictures, you name it over to the police department to review EVERY SINGLE DAY. ive helped so many people track down their stolen goods its insane. we actually help people get their shit back in certain cases but people just dont know that which is fair but yeah.
Rob’s what’s the chassis your rifle is in? I have a Bergara b14 hmr that i think I’m having harmonics issues with too when suppressed…. Also yes you’re supposed to set the scope further up on the scout rifle….
I wouldnt say that it being hot effects accuracy but the heat in the barrell etc and potentially deforming the round which would ld hurt the accuracy being that everything expands when hot. But i have shot 1500 rounds out if my Kimber hero custom thats heavily modified as well and my grouping never changed and the firearm never changed its performance but on the other hand sometimes it holds true to you get what you pay for. But my kimber eas valued at roughly 3k but performed good stock just i nodded it to fit my preferences. The powder might be to hot and pre detonate ir as i stated above buy being hot ive never had bad results. We train often and dont see negative problems from heat
It's not a sniper so don't expect it to work as a sniper. It's a scout rifle with a main use on hunting in a safari... And the reason why the bolt is sticky is because it's made to withstand insane pressures.
imo yes once the barrel is hot i have noticed a change in accuracy. my .308 with a bull barrel isnt to bad but after about 15 rounds she starts to wander a little
0:45 I was in a gun shop in Houston a while back they had similar rules about filming and photos because they were used by criminals for casing the shop for their break in
The the point of impact sometimes can be affected by especially if the barrel isn’t properly stress relieved but for sure is interesting.
Does a rifle lose accuracy when it gets warm? I'm not sure about losing accuracy, but it will shift your POI.
I have a 30-06 that is consistently a half MOA rifle out to 400 yards with my hand load. It has a light contour barrel, and after 3 rounds the POI will begin shifting high left. It will move about 3/4" each shot until I hit 10 rounds down range. At that point, she will hold the same 1/2 MOA group up to 30 rounds down range. Just my POI has now shifted almost 5" from my cold bore zero.
The same thing occurs with my 7mm-08. It has a slightly heavier barrel and will shoot 7 rounds before my POI starts shifting. This rifle will start shooting low right on a hot barrel.
Oddly enough, my 7mm-08 will shoot a clean bore shot in the same group as my dirty bore shots. I've never had a rifle that didn't need a fouling shot before shooting groups, but this particular barrel doesn't need that. Just goes to show how every barrel is different, and you have to learn your firearm. No two barrels are exactly the same.
that rifle in thumb nail and looked cool, glad i got other stuff at gun show!
MPA chassis are mint!!
The other silencer might be fine you just might have to break it in. Use the same ammo run 20 or more rounds through it enogh to get it hot. When the can heats up the plates ever so slightly move emeffecting the shot. So while its hot and moved to where ever its going to move to the bullets will punch a straight hole eventually. Its not huge differences but still enough to effect your shot. If your trying to save money you can run the silencer on a ar15. It wot be silent but it wil heat up the silencer then carefully put it on the other rifle and ren a few more.
No debate it is a fact when the barrel gets hot point of impact changes and the grouping grows. That is a fact period. I have a 270 with a 1" profile barrel that yeah you can shoot 75 rounds or more before it gets hot, but once it gets hot the grouping goes from 1/4 MOA to about 1 MOA, and at about 100 rounds it's at about 2MOA. So it is fact that a hot barrel changes accuracy.
Now I know that iron sights don’t hold a thing to scopes at distance but I shoot my M1A at 600yds all the time and make constant impact on a 20in target and that is while standing.
Biggest problem with the 22-250 is the twist rate on the barrel, it doesn't allow for longer more aerodynamic bullets. A hot barrel will definitely change your groups a little.
I've learned that off the shelf bullets will vary some per box. Especially with a 22-250 . I've owned a howa ranch security 22-250 for a few years and I'm yet to find a extreme consistent brand for it.. I'm not a expert by any means but that is my experience with that caliber
We are insanely short handed with police rn and it sucks. We had only 1 officer on duty for the last 7 hours in my county which is horrible. We need more officers in my department. It's way too much work only having a handful
My Remington 700 did the same thing filed it down and worked perfect
I run Hunting Safaris for Water Buffalo and banteng generally we use open sites it’s quicker in close proximity, but I’ve shot buffalo on the run at 200 metres I love Tim and had greetings of 2 inch in the Target spot open sides Work it’s only if you’re gonna go real long distance where scopes come into it
I worked in a relatively large Gun store for about 14 years. One store, one owner. I stopped working there 2 years ago, but I survived the Covid pandemic gun grab. I’m amazed how CHEAP AND SHITTY all the new modern firearms are made now. Steyr used to be a great European quality built firearm.
All the firearm manufacturers are in a race to the bottom.
Edit; The safety is a copy of a Mossburg tang safety. Which makes me think that the parent company also owns Mossburg. Another Bud Light Rifle. JUNK.
There is a reason why they release the scout 2 quickly to fix the action and trigger. The safety is a 2 stage system one setting i believe to charge and unload and one to not allow you to charge its weird.
A styer rifle comes with a super safe when the white but is up that’s super safe the bolt it locked not going anywhere if you scroll it to the white dot that is safe you can chamber a round and rack the bolt but after you shoot it yes you have to keep it on fire to reload I have a styer love it hope this is helpful
Whats the little blanket around the suppressor (silencer) for?
I have an OG steyr pro hunter in 25-06. By far one of my favorite hunting rifles. Not a fan of the steyr scout.
Two diff types of rails i have on my rifles, picatiny and dovetail pretty sure if your scope rings dont fit on that rifle thats a dove tail system cause i think it looks like you have all picatiny
I lifted the Steyr when buying my first rifle and i thought the gun was way too flimsy. I settled with a Remington 700
You should be using a low power optic that mounts further down on the rifle and has long eye relief for fast firing in safari hunts.
Thanks for the video
Rob, it's not the rifle's fault that you're using it for things it wasn't designed to do.
Thanks Rob!
In the 90s STEYR ARMS partnered with legendary US Marine, rifle expert and shooting instructor Jeff Cooper to develop the MANNLICHER SCOUT.
Jeff Cooper wanted the rifle to be shorter than one meter and lighter than 3 kg.
Its optic had to be mounted as far forward as possible and it had to have iron sights. This was to ensure secure target acquisition up to 400 meters.
In addition to this, the MANNLICHER SCOUT carried a spare magazine in its butt stock.
2023 marks the year STEYR ARMS presents the newly designed STEYR SCOUT II. Making perfect just a bit better.
To achieve even better accuracy housing and bedding block are milled from one piece of aluminium.
Instead of the Weaver-Rail the STEYR SCOUT II integrates a top Picatinny-Rail and a M-LOK mount at 6 o‘clock at the forend. You have the older version developed in the 90s the new version is better and has better accuracy and mounting for scopes back in the 90s that's the type of mounting they used
I met Gabe at Dallas Safari Club couple weeks ago. Great guy!
Come on rob I had to use iron sights out to 500 in boot camp when I was in the Marines it’s not that bad lol Semper Fi brother love your videos
I have 63 year old eyes... at 100 yards the target is a blur LOL scope is a MUST!
I have a Remington 770 308 I love it
See you really got some skills rob
I had the same scope on a 300ultra mag doing the same thing switched to a night force nsx had no more issues I don’t think the leupolds hold a true zero very good
I bought a sig ar 10 308 rattler 1 16 twist wish I could come to your place to learn more about it hope I made a good purchase
Years ago a good friend had a Steyr Scout in 308 and we all hated it so don't feel bad lol
I actually love that rifle I want one for the firing range I always loved the steyr scout, neat bipod I don't know it's effectiveness I also love how it's light weight id put the right scope on it
The best part is the company that made your new chassis also made the Mac 10 clone you had in your last video. By the way they make great double stack 1911s
They have those lil fans you can put in your action to help cool Of course it started from competition needs
Hey here you are! Glad to see you bro
Ahh counter strike fans will like this lol.
As far as the scope not holding zero, could it be a tracking issue?
If you adjusted it to shoot the longer distance, then adjusted it back. Just a guess.
This is a great showcase of all the things you don't know.
Gabe's got to be an Okie. Down and right first freaking shot!!
Yeah forgotten weapons did a really good piece on th e styr scout
the action has to seat itself into the new chassis. when i tighten down action screws i push the barrel into a wall. and i use rock set.
What is the chassis you put on your bregara? Thing looks sweet!
My guess is something with the scope,rings probably happened when riding in the sxs. I’d re torque them then send it again things loosen and move.
Its because pawn shops are shady as fuck.
DREMEL & SAND PAPER WILL FIX THOSE ISSUES
Im glad you're posting more again. We have missed you, Rob.
Honestly surprised he didn’t want the recording.. that’s free business promo. Now from a straw purchase perspective… I understand. Record it… send someone in later… happens… protecting himself.
I happen to be on good terms with the owner and his gun counter guy. He's a really chill dude, he just is very protective about his business and its something I can understand
He had another customer there, if they were doing a pawn transaction it is considered a banking transaction and privacy laws come into effect...
Check your torque specs on your rings,2 uggaduggas doesn’t work. MPA chassis, torque to 65in/lbs. I also took the lug lock out of all of my MPA chassis when I ran them.
The bipod on that looks about as good as the grip pod bipod things they ran during the surge of GWOT
What about the new lake? Is if filling up with all this rain?
usually stick with a medium contour fluted barrel for my bolt guns.
ok I remember you talking about it along time ago but I don't remember what you said about it what do you mean by slipping the rings?
Something is moving around on that 22-250 that's the only reason it would do that I have a savage axis a it's still in the factory stock all I did was bed it and I can shoot 30 rounds without stoping the groups open up after about 6 shots but the zero doesn't move
Steel can expand a lot when heated up so yes a hot barrel should reduce accuracy
I havent heard anything about the big shooting range with the containers in awhile. What ever happened to it?