Thanks for this video, there is none of that engine since I have the same one in my 2014 Jagual and there are no parts for them and I thought about making that same invention that you want to make but since my engine is still running I have left it alone but I would be more interested strength and keep my reverse gear on that crank if you achieve that invention you will be the first to do it and it will be a stick and believe me I am here too from where I follow you from Puerto Rico
typically GY6 B-Block has a bore opening of 65mm for it can fit an SSP-G Cylinder 63mm Piston Kit for its cylinder skirt slip-in at 64.9mm inside a GY6 B-Block crankcase or inside a Polaris RZR 170 crankcase bore opening perfectly , it’s a dropin kit
no and if they did they would be far more expensive than other options. as far as this particular motor "trailmaster "200 /161qmk" we have a full selection of cvt upgrades already gotbuggies.com/product-category/parts/cvt-performance/gy6-cvt/ once we make our move we from Florida to TN we plan on offering stroker cranks and a cam swap service for these motor to level the playing field.
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
Thanks for making this . The more I can learn the better choices I can make to upgrade my buggy.
Thanks for this video, there is none of that engine since I have the same one in my 2014 Jagual and there are no parts for them and I thought about making that same invention that you want to make but since my engine is still running I have left it alone but I would be more interested strength and keep my reverse gear on that crank if you achieve that invention you will be the first to do it and it will be a stick and believe me I am here too from where I follow you from Puerto Rico
I can't wait to see the outcome. Mine currently went down and started smoking I've got it semi torn down
What are the mm of the stock piston on the 161qmk?nevermind 61mm as i posted the question it was answered 3 seconds later
Looking into doing a top end on this engine and can't find any specs on it where could I find some like head/rockers torque specs and how to time!
i go 16 ft lbs on all of them
I gave you a very descriptive answer that they didn’t let me post sorry guess they don’t want you to know
typically GY6 B-Block has a bore opening of 65mm for it can fit an SSP-G Cylinder 63mm Piston Kit for its cylinder skirt slip-in at 64.9mm inside a GY6 B-Block crankcase or inside a Polaris RZR 170 crankcase bore opening perfectly , it’s a dropin kit
That 161 Qmk head that can be crammed where can I get that????
If we only had more performance options for this engine. Does the polaris parts fit this engine?
no and if they did they would be far more expensive than other options. as far as this particular motor "trailmaster "200 /161qmk" we have a full selection of cvt upgrades already gotbuggies.com/product-category/parts/cvt-performance/gy6-cvt/
once we make our move we from Florida to TN we plan on offering stroker cranks and a cam swap service for these motor to level the playing field.
I think the Dong Fang 168.9cc has a bigger stator for charging.
It might , the trailmaster efi model has a larger stator.
Hey JD , you wouldn't happen to know what the valve lash is supposed to be on 161qmk?
same as any gy6 but i set all my motors between .004/.005 on both
Can I put a 11" 150cc engine on a boss frontier, the boss frontier used 161 qmk b2, both have 11" distance for where the axle goes into the rear wheel
i am not super scooter savy but my guess is the dimensions should be the same from what i have seen
What transmission fluid do you recommend for the trailmaster model number 161qmk m08000422?
12 oz 75/90 synthetic gear lube. i use royal purple or lucas
Where is the model number located at on this motor and similar ones....I cannot find it on mine
sometimes on the top next to the cvt cover others on the lower driver side under the lower front of the cvt cover
@@jdscustombuggies1733 thank you so much
161qmk motor what would be belt size?
Depends on the company and configuration, standard gy6 743-20-30 for the most part.
Do you offer a 161ZMK-B2 rebuild service. I have no idea how to go about this. I can't find a company or individual that I could send my engine too, to have it built. Any Help?
we do , 941 286 6703
161QMK equals how many cc?
169cc
Just install gy6 cylinder block 😁
This is why if my Massimo motor ever gives up the ghost I'll change to a v twin engine of some kind and add reverse box.
How can I call you🫱🏼🫲🏾👨🏻🔧
941 286 6703