How to install power wires to your amp
HTML-код
- Опубликовано: 14 янв 2025
- LETS MAKE THIS EASY
This is a car audio how to tutorial that will show you how to install power wires to your amp. I go over the different types of inputs on your amplifier, amp kit wires that you need to install an amplifier and also different ways to install wires to your amp.
The 1st amp has a spade terminal style connection which requires spade terminals for your power wire the other style is a set screw style which you can load bare power wire in the amp or install wire ferrules for a cleaner look.
✅ links are listed below also other videos that will help you install an amplifier to your car.
SUBSCRIBE FOR MORE CAR AUDIO DIY TUTORIALS radio removals, radio installs, speaker replacement, speaker installs, car audio reviews and much more.
🔻
Did this video help you? Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.co...
🔻
WHAT TO WATCH NEXT:
HOW TO INSTALL AN AMP: • How to install a sub a...
HOW TO INSTALL A lINE OUTPUT CONVERTER: • how to install a loc -...
WHICH WIRE HARNESS SHOULD YOU BUY FOR YOUR CAR: • which car stereo wire ...
HOW TO SAFELY TAP INTO YOUR CAR FUSEBOX: • HOW TO SAFELY TAP INTO...
HOW TO WIRE A RADIO: • Car stereo wiring harn...
HOW TO STRIP A WIRE • How to strip your wires
HOW TO PLAYIST: • how to
🔻
Parts used for this install are:
Klien wire cutter amzn.to/3kHQK4M
Klien wire crimper amzn.to/3eJ7sNj
4 gauge spade terminals amzn.to/3BlogUh
wire ferrules pack with crimper amzn.to/3xQO8VP
Solder Torche amzn.to/3rpRIUi (Harbor Frieght has a cheaper one)
🔻
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
🔻
~Tools I Use almost everyday~
NEW Milwaukee right angle driver amzn.to/2t4mDvM
NEW Milwaukee right angle drill amzn.to/2GwZAwQ
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Good looking out, even some of us OG's need the wisdom from our young brothers from time to time. Extremely helpful video, looking forward to your other content.
@robertwilson4400 glad to have you apart of my community 💪🏾💪🏾
breh no one else would fucking show how to actually connect a wire to the amp and would just show where each connection would go, thank you
Because it is literally as easy as it gets no one makes a video on it because no one actually thinks anyone needs to be shown how to terminate any wire to the amp lmao how the hell do you need a video on this
@@Mr.Thermistor7228why are you here lmao
It's so true and it's so satisfying thank you so much bro
@@Mr.Thermistor7228 its easy and anyone can do it lmao what I needed help on was what connectors to use as i was shoving the wires in, this was also 2 years ago and I can do anything audio now, Cant knock people who try to learn buddy
@@sha13imran And the cycle repeats 🙏🙏 fuck that guy Im learning and hope to do anything audio one day too, motivated me!
Man you just gave me Reason to do stuff for myself
Hey bro thanks for the video, BIG HELP! You're a boss for adding weblinks for the parts too.
I searched so fricken hard for a video explaining literally EXACTLY this! Golly! This was a fresh glass of sweet tea after hours of searching for a simple amp wiring tutorial that wasn't about wiring the subwoofers to the amp and their different impedance's. I literally just wanted to know the best way to go about those different terminals on the amps. And I literally have a mono amp that's one style terminals and the speaker amp that's the other style just like you had in this video. This was perfect and you explained everything really well. Thank you bruh. Like forreal. Lawd
P.S. You got my sub homie. You earned that shyt
Your teaching is awsome❤ good job 🎉
I like that u like it to be clean & look good & be done good... Im the same way, I really can't stand when people dont do it good & make it messy & tacky. Anyways thnx for all the tips(: ur video was perf for what I wanted to see
Very informative, nicely portrayed! Great job, brother! Thank you!
Thank you for this video. I figured there was a way to have cleaner wiring in a set screw . I need some of those caps
You definitely know your stuff. Thanks for sharing
Killer video, very informative and straight to the point!
I subscribed bro , love your vid and soooo happy to see someone else bend the tip of the wire to help fill the gap :)
@kristianpallone8726 thank you 💪🏾💪🏾
J u the man you've helped me more than you'll ever know thank you an godbless you bro
very informative; thank you !!
Wawwww very very good am in D Caribbean just looking at your u can learn because some of D. Videos not so good dis one teaches me a lot am Peters
Thanks Man! learned something
Thank you sir great video helpful 👍
yo i just wanted to say thank you, a few of your other videos really saved me with my install and i appreciate you... your full of information and its valid bro thank you for being out here.
Man its comments like this that make me feel like this is my purpose. to help everyone with what i love to do. So i need you to know this comment pushes me to keep going.
Nice presentation, very clean!
Thank you for the information! ❤
I have that same crimper but looking at that ISWISS joint you recently reviewed.
kabel is 10mm2 or bigger?
awesome, good deal
Thanks man 👍
I learned a lot, very well explained. You are a professional. Brett Elite Tree Profesionals
I was never sure of those spade connectors could handle the amperage. I’m gonna give this a try because my wire keeps coming out of the amp.
QUESTION :
I have the Boss R1100m, RCA cables out of my stereo unit to amp,sub wires to mono sub, but how/where do the front and rear 2way speakers get hooked up to ?
thanks bud
Thanks man im having tons of trouble installing into my 2017 camry
The connector to the speaker itself is a quick connect female right ? Lik when you get a metra harness to connect to original
No, either spade terminals or soldered onto the posts. Essentially no different than a connector your talking about
Very informative.
You shouldnt out saulder in the wire ferruls because if the wire becomes hot enough the saulder can melt at the high temperatures
So are you telling me that I just can't twist it and stick it into the amp 🤔 or is there an advantage to the accessories I'm adding to my wire to stick it into the amp 🤔
That's the worst way to do it. You need a proper fit for ultimate flow.
nice job
Those spade ones I got same ones they dont seam to fit in my kicker dx amp
spade style is garbage and annoying to make the wires
So I am switching out amp and sub wire is already laid, do I have to disconnect the negative terminal from the battery? I'm having a hard time disconnecting it
could you answer this!
You probably should since you would be disconnecting the hot wire to swap the amps. You'll get a spark if you don't. You could short something like that.
Could you do connection with a pre amp equalizer with amp connection?
lets get it bro
My bigga figga. 😂🤣😂🤣
Ab is good for mids and highs I need loudest sound
I wish amps would not put a remote wire in the middle of the power wires. The remote wire shouldn't even be right there next to those terminals in my opinion.
Where do I connect my blue wire in the case that my CarPlay harness doesn’t have a blue wire to connect to my amplifier?
So ground first then power ? What about if ur trying to disconnect it ground first power last? I don’t wanna blow any thing or short circuit .
Just disconnect your negative on your battery
Ok I’ll work from there thanks
hey boss, question for you.. i have a taramps md800.1 i have 4 gauge wire ofc wire through my car but 4 gauge doesn't fit this amp. i have 4 gauge spade terminals but those dont fit either what would you suggest i do?
Shave them down until they fit or get smaller spade terminals. They make different sizes while still working with the same gauge wire
You can use input reducers
Is it worth it to make sure the spade connectors and ring connectors a 100% copper if you going to be using 100% copper wires? Seems like it's a bad idea to use a metal with higher resistance then the wire itself when the point of the copper wire was to reduce resistance in the first place.
No it would be so insignificant of a difference it is a complete non issue
when i turn the volume up the sub cuts out anyone know what’s happening. the amp stays on but a pop happens and no more sound comes out until i reset
You were clipping gain is set to high
Sell me that old-school amp
Can I send u pic of wat I got
Help me
Quite some emphasis in your tone when you said "Alot more quality." Highly doubt that. Wtf is Zapco?? lol Pioneer has been around since you were wearing diapers. Not talkin sh*t js. Just talkin.
So where do the wires go. Where's the install. Thumbs down
Read the title 😅
RTFM