Excellent. The main downside causing that instability is that it's made from wood so there's a slight flex when the rig's spinning at higher RPM, also the wheels on either side. Consider replacing those with heavy duty bearings instead so that the axle holding the Ferrite magnet is locked into place. It'll likely allow you to spin the magnet even faster whilst being more stable, to improve the energy generation even more. Best of luck 👍
With all respect it looks impractical. It's so big and so much wire but it bearly lights up a few less and a small motor. The efficiency will be much better if the coils where in a axial design with magnets passing both ends of the coil. The long coil design decrease the number of turns per unit lenght. This decreases the magnetic field strenght of the coil which is a contributer to drag when the coil is loaded. But since the voltage induced for a straight wire is proportional to the lenght of the wire, and a coil of wire can be broken down into many tangents of straight wire, then the coil should still produce reasonable power regardless of the low number of turns per unit lenght. This is because the core plus the axial design will ensure maximum uniform magnetic field strenght throughout the lenght of the coil.
@@raloed.363 I'd love to see a demonstration of what you've described here. Sounds cool. Makes me imagine a large diameter wheel spinning, which has magnets on the outer edge, and smaller coil stacks all around the outside.
@@mcorrade True, I did not notice the date you made your comment, you sure have been busy since then for sure, I don't think I would attempt it anyway, seems there is a lot fuss for little gain.
I am ready to carry out the electricity generation project with angular resonance together with investors who agree to make an official protocol. I have worked for 15 years for this project. After the official signatures are signed, everything will be done openly. 98% of the videos published on are wrong and do not work. I know the mistake they all make.
@@olegvinokurov987Whoever builds such a system, the rule to understand is simple. You cannot produce energy without getting energy from outside with a disc that rotates continuously and whose angle does not change every second. Of course, if you try this, you will understand the subject better. At least 2 different resonance angles are needed to generate energy. This video system has 1 constant vibration resonance. Therefore, it acts as a kinetic capacitor (temporary energy storage). It does not provide additional energy to the system. Everything is within physics. There is no energy created from nothing. Existing energy is used in the best way. Gravitational energy is present everywhere. In my design (ARES), the robotic and mechanical system, whose angle changes every second, provides this.
what size of an Electromagnetic Generator would you need to power a house. with your average stuff in the house. also I would like to make one to power a water pump for a high banker for gold hunting.
Lolx someone already made that design to create anti gravity. U took the same idea 💡 and put coils and put a lever in the middle. Nice work Thoe keep it up but stop taking people credit not cool
Well, Well well, this is the most artistic overworked SCAM so far But never the less still a scam. PLEASE DON'T WAST YOUR TIME OR MONEY TRYING IT , AS CAN NEVER FUNCTION.
Это же извращение в прямом смысле. Один магнит на такое количество катушек, и темболее феритовый. Надо было в место этого магнта применить шар из диэлектрика с наклеенными на него неадимовыми магнтами с количеством могнитов в 2 раза большим чем мкатушек. Идея хорошая но недоделанная.
Yo genere más energía con un elevador de voltaje. Apenas y prenden los lees. Estoy de acuerdo. Es una pendejada. Necesita un exitador o un arrancador. No es autónomo. Además tiene vibraciones que nublan la fuente directriz generadora, lo que se ve en el osciloscopio. La ieee está decayendo la verdad
You should definitively balance your rotating apparatus, every thing look's wrong to me, even if the concept look's acceptable. Be strait and revise your concept before making it public as it is easy to balance a rotor. Here we can even see that the wheels that serve as flywheel are not even centered on the shaft. Bad looking even for a prouf of concept.
Excellent. The main downside causing that instability is that it's made from wood so there's a slight flex when the rig's spinning at higher RPM, also the wheels on either side. Consider replacing those with heavy duty bearings instead so that the axle holding the Ferrite magnet is locked into place. It'll likely allow you to spin the magnet even faster whilst being more stable, to improve the energy generation even more. Best of luck 👍
With all respect it looks impractical. It's so big and so much wire but it bearly lights up a few less and a small motor. The efficiency will be much better if the coils where in a axial design with magnets passing both ends of the coil. The long coil design decrease the number of turns per unit lenght. This decreases the magnetic field strenght of the coil which is a contributer to drag when the coil is loaded. But since the voltage induced for a straight wire is proportional to the lenght of the wire, and a coil of wire can be broken down into many tangents of straight wire, then the coil should still produce reasonable power regardless of the low number of turns per unit lenght. This is because the core plus the axial design will ensure maximum uniform magnetic field strenght throughout the lenght of the coil.
@@raloed.363 I'd love to see a demonstration of what you've described here. Sounds cool. Makes me imagine a large diameter wheel spinning, which has magnets on the outer edge, and smaller coil stacks all around the outside.
@@Johny40Se7enyes bit the coils will be axially placed on the outer edge. I would build it if I had the time and resources
@@raloed.363 do simple sketch or mock up of it using household things first, then reference to it 😉
@@Johny40Se7en I'm currently doing that with another project lol 😆
The music convinced me this is Free Energy!!!
Honda was already doing this with their brake systems years before this video came out.
That is one crazy looking reluctance generator.
Way to simplify manufacturing👍
Always looking for like minded peers to share with. I have some interesting new designs as well.
Nice music
Brilliant designs and would love to replicate
So your next project I assume 😁
@@SpaceManAus I wish I got too many other projects that are way ahead of that
@@mcorrade
True, I did not notice the date you made your comment, you sure have been busy since then for sure, I don't think I would attempt it anyway, seems there is a lot fuss for little gain.
robert adams motor generator.. is the best of all the effect of power in and out is reversed the you put load,, the greater the efficiency
have you ever seen a working adams motor ?
Does it shake like that intentionally? Is this how the imbalanced system works?
are you sure the coils should not be closer? 0:35
I am ready to carry out the electricity generation project with angular resonance together with investors who agree to make an official protocol. I have worked for 15 years for this project. After the official signatures are signed, everything will be done openly. 98% of the videos published on are wrong and do not work. I know the mistake they all make.
О какой ошибке идёт речь? Что нужно сделать чтобы работало?
@@olegvinokurov987Whoever builds such a system, the rule to understand is simple. You cannot produce energy without getting energy from outside with a disc that rotates continuously and whose angle does not change every second. Of course, if you try this, you will understand the subject better. At least 2 different resonance angles are needed to generate energy. This video system has 1 constant vibration resonance. Therefore, it acts as a kinetic capacitor (temporary energy storage). It does not provide additional energy to the system. Everything is within physics. There is no energy created from nothing. Existing energy is used in the best way. Gravitational energy is present everywhere. In my design (ARES), the robotic and mechanical system, whose angle changes every second, provides this.
EXCELENTE IDEA!
Dunno. It violates the conservation of energy. Looks good, very possibly he is blowing on the wheel with compressed air.
So this reduces the pushback from hystoresis or load?
what size of an Electromagnetic Generator would you need to power a house. with your average stuff in the house. also I would like to make one to power a water pump for a high banker for gold hunting.
you would need about a thousand of these to power a house
😂😂😂😂
Balancealooooo campeón ess una coctelera eso
Это может быть что угодно, только не генератор. It could be anything, just not a generator.
Well it seems that every idea I have it has already been created. But still I have 18; I might as well have original ideas in the future.
부피가 너무 커요... 발전량도 작아요 상업적인 문제가 있어 보여요
Brother ubtained output voltage & amps details please?
Eine Vision im Traum gesehen
magnetic needle bearings are wear its at
A GOOD PROP FOR A FAKE DEVICE
Those flywheels (wheels) are really out of balance!
Lolx someone already made that design to create anti gravity. U took the same idea 💡 and put coils and put a lever in the middle. Nice work Thoe keep it up but stop taking people credit not cool
You sound like a jerk
looks real to me
Вскипяти 2 литра воды на блине электроплиты чтобы доказать что в быту это ценно! 😅
Das habe ich auch gedacht
The music is not going to make it work, so dramatic!
Well, Well well, this is the most artistic overworked SCAM so far But never the less still a scam. PLEASE DON'T WAST YOUR TIME OR MONEY TRYING IT , AS CAN NEVER FUNCTION.
Это же извращение в прямом смысле. Один магнит на такое количество катушек, и темболее феритовый. Надо было в место этого магнта применить шар из диэлектрика с наклеенными на него неадимовыми магнтами с количеством могнитов в 2 раза большим чем мкатушек. Идея хорошая но недоделанная.
tanto para hacer funcionar solo un motor de mierda.
encima ay que cevarlo y ay rozamiento
Primero que todo no tienen la fuersa van a nesesitar una caja transformadora de rpm en potencia de empuje de no tener solo es una pendejada
Yo genere más energía con un elevador de voltaje. Apenas y prenden los lees. Estoy de acuerdo. Es una pendejada. Necesita un exitador o un arrancador. No es autónomo. Además tiene vibraciones que nublan la fuente directriz generadora, lo que se ve en el osciloscopio. La ieee está decayendo la verdad
Very low output. SCAM, SCAM, SCAM.
Un altro che ha tempo da perdere.
😂😂😂😂
ruclips.net/video/_dZ-zJMkYZc/видео.html
Interesting concept... Horrible music. This music simply does not belong... Sort of like putting mustard on ice cream... it's a bad fit.
Encore un bricolage sans intérêt, rien de nouveau sur la planète...
You should definitively balance your rotating apparatus, every thing look's wrong to me, even if the concept look's acceptable. Be strait and revise your concept before making it public as it is easy to balance a rotor. Here we can even see that the wheels that serve as flywheel are not even centered on the shaft. Bad looking even for a prouf of concept.
I had lunch today.🧽