How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap.
very nice., saludo ako sayo brother., sa preparasyon palang.,talagang polido at ang materiales na gamit mo ay solid talaga., halatang my alam ka talaga brother saludo ako sayo..🫡🫡🫡💪💪💪 proud from bukidnon nka subscribe na ako...
Are you using Urea crystals? I assume the bottle you used before placing it in the sun was water and dish soap? The fractals turned out great, by the way.
@@scottjewell1420 its 1 part urea and 1 part destilled water adding 2% ox gall is a must. so as example: for 200ml fx -> 100g urea + 100ml dest. water + 2ml ox gall. only works with warm temperatures and applied best with cloth soaked full of the fx solution. add thin layer of the solution and wipe each side one time. let dry.
@@noelfrancisignacio8752 He knows that, that's not what he's asking. Before the guy in the video puts on the clear coat, he touches the tank in a few spots, it looks like that makes the crystals form from where he's touched the tank. Go back and have a look....
Hi Ron, I spotted that too. It looks like it made the crystals form more uniformly, like the centres of the crystal patterns are where he touched it with his finger before clear coating it. I'm going to try this myself... It would be nice if the painter confirmed this... Edit, Ron, I read through the comments and I was right, this was his reply to the same question you asked.. "Yes sir.. you point it were you want to start the crystal effect".... Good luck mate...
Hello brother i am from pakistan and i really like your tank design bro what kind of product you were using in whole process kindly explain me i would be very happy if you guide me.
Thats urea fertilizer sir you put urea fertilizer into hot water then mix until urea is melted ratio 1/1 urea and water then put small drop of dishwashing liquid and u mix it. Mix sure the paint is dry when you put urea to the surface then wait until the liquid is dry then mistcoat 2x your 2ndcolor ☺️☺️
Urea fertilizer po yan maam meron po tayong video tutorial nyan maam kung pano po yung pag gawa eto po yung link ruclips.net/video/oV61Rh-tRyQ/видео.html
Hindi gaano nagkicrystal eeffect sa akin sir, bat kaya? putol putol crystal nya unlike sa video mo mahahaba at solid ung line ng crystals, ano kaya reason don? nilagyan ko din butil para doon magmula ung formation ng crystals kaso un nga sir di maganda kinalabasan
Sir mraneng slmat Po s sagot nyo sir tnung kulang pho nka preper npo tpoz Po nag pramer Ako Ng Weber epoxy pramer tpoz Po ginamitan Kuna Po Ng silver tpoz Ng Lagay npo Ako Ng pertilazer hnd Po sya nag react sir patulong nman sir gusto kung mtutunan
Boss tanong lng.. ano kaya problema bakit maliliit ung crystal na na foform nya?? Tas additional pag nag lagay ka na ng black ilang minutes bago mo nahugasan? Nung tinagalan ko kasi sakin di ko na maalis ung black😂
Good po bossing bawasan nyo po yung yung urea si baka po sobrang tapang nong mix nyo tapus po dapat tuyo na yung black bago nyo hugasan patuyoin nyo po ng 45mins to 1hour po dipendi po sa kakapal nong black.. wag nyo po nasyadong kapalan yung black sir para madaling hugasan
@@abpworkstv9761 isa pang bossing... Di ko pa makuha ung malalaking crystal nya ... Pero nakita ko sa iba is kailangan maiinit ung panahon pero bawal daw ibilad sa araw... Ano kaya pedeng gawin kasi dito sa amin is malamig... Pede ba syang gamitan ng hair dryer?😂
Greetings to my friend. I'm watching your channel and your fantastic work and talent. I have one question. How do you achieve such big and beautiful shapes? I know that, in essence, the crystallization process must be disrupted at some stage. That is, to make a scratch with a sharp object. My result so far is just a little starfish. How are you doing at this stage, please? Thank you for your work, inspiration and advice!
Thank you sir for yor appreciation ☺️ by the way sir you try reduce the urea sir. I think you mix more urea than hot water sir try to mix again and this time reduce the urea and put small drop og dishwashing liquid
@@abpworkstv9761 boss after mo nilagyan nung urea ano ung parang tinutusok nyu po? At ilang minuto po nakalipas after nalagyan ng urea saka pd nang tusukin?
Brother your work is Amazing 👌🏼💘. But please add some details also that what are you using .. all the best 👍🏼✌🏼
I love it good job❤❤
Thank you 😊
Outstanding work , is your crystal free solution homemade or store bought ?
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap.
Qual e o liquido que passa no tanque antes do preto?????
very nice., saludo ako sayo brother., sa preparasyon palang.,talagang polido at ang materiales na gamit mo ay solid talaga., halatang my alam ka talaga brother saludo ako sayo..🫡🫡🫡💪💪💪
proud from bukidnon nka subscribe na ako...
sarap basahin ng comment mo bossing hehehe maraming salamat po :) godbless bossing ridesafe always
Quality ❤️‼️
Salamat bossing hehe
Ganda ng birada mo brod!
Salamat bossing :)
How to make crystal liquid ? Thanks so much. 🙏🙇♂️
Suuper work
Thank you ☺️☺️
anong ratio ng urea solution mo po paps at ang ganda ng effect? O machnic sa pag apply ng solution sa surface para s ganyang efffect?
Hello. Please tell me. Do I need 100% pure urea or I can use fertiliser with 50% of urea?thanks
Good Job
Thank you 😊😊
Hello po..ano pong pintura ginamit mo sa pang primer at ung itim na pagkatapos maglagay ng urea bossing??
Sir please tell me crystal paint complete process
Boss ano gamit mo na pintura? Anzahl din ba? At pano mixture mo boss 1 paint 1 thinner 1 hardener parin ba or may dagdag bawas
El agua esa que es lo que lleva, 🙏
Mas maganda yan kung may candy colors
request po yan ng customer sir :) para po bumagay sa. build ng motor :)
Are you using Urea crystals? I assume the bottle you used before placing it in the sun was water and dish soap? The fractals turned out great, by the way.
Yes sir thats urea fertilizer ill use emty bottle of dish soap for easy apply porpoise. Tnx for the compliment sir 😁
Wow looks amazing! What is your recipe for the urea solution mixture?
@@brunonero123 id like to know the method of application for getting crystaks like that .
@@scottjewell1420 its 1 part urea and 1 part destilled water adding 2% ox gall is a must.
so as example: for 200ml fx -> 100g urea + 100ml dest. water + 2ml ox gall.
only works with warm temperatures and applied best with cloth soaked full of the fx solution.
add thin layer of the solution and wipe each side one time. let dry.
@@scottjewell1420 ruclips.net/video/aQgXRpMq5mU/видео.html
Hawuda
Great work but need more in debt details
Thank you sir 😊😊😊
apila ako nyak hahaha
Hahaha sige
Ni tanpa di dasari warna silver ya ka ?
Làm hoá chất tạo vân như thế nào vậy ạ, cho hỏi cách làm chi tiết hơn được không?
Sorry i don’t understand
Ok yan idol... Ask lng idol bakit ganyan crystal effect nya ang ganda!!!!😮😮😮😮 Un nba ung pagsawsaw mo sa isang daliri tapos dampi sa tanke?
Opo sir tusukin mo lang yung medyo tuyo ma na part para dun mag simula yung crystal effect
مذا خليت وتشطب الصبغ
Hi have you ever try doing it on black then do crystal effect then paint silver sanded and clear coat
Yes sir much better silver 1st then black 😊
@@abpworkstv9761 thank you can you please tell me how you mix your urea
@@Mrjoker622 1/1 urea and water, boil until urea was melt din pot small drop of dishwashing liquid 😊
@@abpworkstv9761 thank you I will try that does it matter what urea I use there are different ones in store
Also I saw you use a stick and you were had some kind solution on it
When you're touching the crystal FX what are you putting on it or are you poking a hole to fracture the crystals
its urea fertilizer.
@@noelfrancisignacio8752 He knows that, that's not what he's asking. Before the guy in the video puts on the clear coat, he touches the tank in a few spots, it looks like that makes the crystals form from where he's touched the tank. Go back and have a look....
Hi Ron, I spotted that too. It looks like it made the crystals form more uniformly, like the centres of the crystal patterns are where he touched it with his finger before clear coating it. I'm going to try this myself... It would be nice if the painter confirmed this... Edit, Ron, I read through the comments and I was right, this was his reply to the same question you asked.. "Yes sir.. you point it were you want to start the crystal effect".... Good luck mate...
@@MickH60 noel was right though its the fertilizer but not mix
What mixture do you use for the crystals?
Ratio 1 / 1'1/2 "1 fertilizer / "1'1/2hot water / 3drops dishwashing liquid :)
@@abpworkstv9761 what fertilizer? Ammonium nitrate? Magnesium sulfate (Epsom salts)?
@@jakederanger285 urea
Klo dasaran gold bisa ga
mag kano kaya ang bayad nyan idol.?
Hello brother i am from pakistan and i really like your tank design bro what kind of product you were using in whole process kindly explain me i would be very happy if you guide me.
Thats urea fertilizer sir you put urea fertilizer into hot water then mix until urea is melted ratio 1/1 urea and water then put small drop of dishwashing liquid and u mix it. Mix sure the paint is dry when you put urea to the surface then wait until the liquid is dry then mistcoat 2x your 2ndcolor ☺️☺️
What did you put on by hand that made the crystals go like that.. Thx and good job
@@abpworkstv9761 will this work with waterbased paint or just with thinnebased paints?
@@kennethandersen6920 thinnerbased bro 😊
Hello, very nice work! Wondering what it was you applied by hand on the tank? Was it a peice of fertilizer??
Apa nama effect nya bang.. Ada jual di shopie ka
how to make the dot? are you using a nail? and at what point in time?
Yes sir.. you point it were you want to start the cyrstal effect
Do you do when it's still wet or as it starts drying?
Much better cguro sir qng ginamitan mo ng candy toner...
Tama po kayo sir :) mas maganda po yun. Kaso yan po kasi yung request ng may.ari para bumagay daw sa ikakabit nyang sidecar :)
boss ung mixture mo ng urea fertilizer iba pa ung nilagay mo mismo sa tanky nung nasa arawan na? urea ba ung nilagay mo mismo? pano? salamat idol
Opo lods botil po ng urea lods lagay mo xa pag malapit na matuyo para yun pag simulan ng crystal hehe
Salam satu hoby mas...
Thank you ☺️
Idol ilang minuto bago mag crystal yung urea?piraso ba ng urea yung nilagay mo habang nakabilad ??thanks po in advance
Opo bossing botil po yun ng urea tingin ko nasa tatlong minuto lang boss or limang minuto depende po kasi kung mainit panahon hehe
what do you dab on to make the white spots?
യൂറിയ
Yuriya
Pwede ba anzal clear top coat (car show) sa ganyan paps... Or anu topcoat mo?
Pwede paps kahit anong clearcoat
Kung naka patong yung black paint sa crystalized matibay padin ba boss kapit sa basecoat?
Sa base po talaga nakapatong yung blackpaint boss aalisin din naman yung crystal after ng blkpaint
After black spray paint dry up then how much pressure you apply to wash that tank ?
Rob gentle untiil urea remove to the surface sir
Bro cryatal liquid eppudi pannanu nu tamil la solringala
Liquid name please
Thats Urea fertilizer sir
What did u put at 9:00 ?
I am not positive, but, I think it was Urea crystals. It would be nice if he were to explain as he goes.
sir tanong ko lang ano po ung dinidikit niyo after niyo buhusan ng chemical?
Butil po ng urea bossing
Where are you form..?
General santos city sir from phillipines ‘
idol ano po yung nilagay mo..bakit nagkaroon ng cryztal effect
Urea fertilizers po bossing yung pataba po sa halaman hehe
What is this colour name to change in RC book
ano po inilagay sa grey bago black
Urea fertilizer po yan maam meron po tayong video tutorial nyan maam kung pano po yung pag gawa eto po yung link ruclips.net/video/oV61Rh-tRyQ/видео.html
what do you do on 9:25 ?
looks great 👌
I pot some piece of urea fertilizer to start reactions
BOSS TANUNG LANG PO
CATALYST LANG ANG PANG TOPCOAT CLEAR KO PWEDE BA YUN LANG MISMO CATALYST
hindi po bossing
Some kandy of any color would have put it over the top
Sir yes sir 😁😁😁
Sir. Anu PO Yung Ginamit nyung pinang buhos sa tangke.?? Salamat sir godbless
Urea fertilizer po sir na tinonaw
@@abpworkstv9761 salamat po sir
Niru Indonesia nihh
Boss pwede ba yan sa samurai paint?
Pweding pwede
Po bossing ☺️
Sir ung urea ba diba po ihahalo po un sa mainit na tubig tapos may sabon, kailangan po na maligamgam sya iapply or kailangan malamig na?
Ehalo po sa mainit na tubig hanggang ma lusaw tapus palamigin saka lagyan ng kunting liquid dishwashing bago po eapply
Hindi gaano nagkicrystal eeffect sa akin sir, bat kaya? putol putol crystal nya unlike sa video mo mahahaba at solid ung line ng crystals, ano kaya reason don? nilagyan ko din butil para doon magmula ung formation ng crystals kaso un nga sir di maganda kinalabasan
@@ghelomotopaintstv4563 bawasan mo konte yung lulutoin mong urea bossing
Sir panong bawasan po? ang ginawa ko po kasi kung gaano karami ang urea, ganon din kadami ung tubig
@@ghelomotopaintstv4563 gawin nyo pong 3/4 yung urea bossing
Ini pake dasaran wrna apa kang?
Thank you ☺️
@@abpworkstv9761 what is base coat paint?
NR car
Boss pde pho b Jan gmiten Ang hanzal aks kulang po
Pweding pwede po bossing..
Sir mraneng slmat Po s sagot nyo sir tnung kulang pho nka preper npo tpoz Po nag pramer Ako Ng Weber epoxy pramer tpoz Po ginamitan Kuna Po Ng silver tpoz Ng Lagay npo Ako Ng pertilazer hnd Po sya nag react sir patulong nman sir gusto kung mtutunan
Anu yang parang tubig nayan db asin at joy yan
Urea fertilizer po sir yung pataba po sa halaman
Boss tanong lng.. ano kaya problema bakit maliliit ung crystal na na foform nya?? Tas additional pag nag lagay ka na ng black ilang minutes bago mo nahugasan? Nung tinagalan ko kasi sakin di ko na maalis ung black😂
Good po bossing bawasan nyo po yung yung urea si baka po sobrang tapang nong mix nyo tapus po dapat tuyo na yung black bago nyo hugasan patuyoin nyo po ng 45mins to 1hour po dipendi po sa kakapal nong black.. wag nyo po nasyadong kapalan yung black sir para madaling hugasan
@@abpworkstv9761 isa pang bossing... Di ko pa makuha ung malalaking crystal nya ... Pero nakita ko sa iba is kailangan maiinit ung panahon pero bawal daw ibilad sa araw... Ano kaya pedeng gawin kasi dito sa amin is malamig... Pede ba syang gamitan ng hair dryer?😂
Greetings to my friend. I'm watching your channel and your fantastic work and talent. I have one question. How do you achieve such big and beautiful shapes? I know that, in essence, the crystallization process must be disrupted at some stage. That is, to make a scratch with a sharp object. My result so far is just a little starfish. How are you doing at this stage, please? Thank you for your work, inspiration and advice!
Thank you sir for yor appreciation ☺️ by the way sir you try reduce the urea sir. I think you mix more urea than hot water sir try to mix again and this time reduce the urea and put small drop og dishwashing liquid
The temperature also sir is important make sure you put it into normal temperature not direct to the sun heat
@@abpworkstv9761 Great sir! I'll try to make a new concentration ratio. And maybe it will be better. So I'm going to make a 1: 1 ratio?
@@karelchmelir2006 yes sir ☺️
@@abpworkstv9761 how long we should leave it before spraying?
Boss sa paglalagay na ng urea kailangan po ba basa pa yung pintura or tuyo na? Ano po gamit mong urea boss? 40-0-0 o 46-0-0?
Dapat po bossing tuyong tuyo na po hehe 40 or 46 po pwede
@@abpworkstv9761 boss after mo nilagyan nung urea ano ung parang tinutusok nyu po? At ilang minuto po nakalipas after nalagyan ng urea saka pd nang tusukin?
@@mercaralk butil nga urea po pag malapit na pong matuyo saka mo tusokin sa parting gusto mo kung san magsimula yung effect hehe
@@mercaralk gagawa po ako ng tutorial nito bossing hehe 🙃 paki subscribe nalang po lods para ma inform ka pa lods hehe
@@abpworkstv9761 salamat boss naka subs nako
Unga num mattum sent panunga bro
Bhai mene aapki channel ka link apne WhatsApp group me sher kiya he
Sar aapka number mil sakta hai kuchh Janna tha sar
mag kano kaya ang bayad nyan idol.?
Nasa 2k po sir