From my experience, you get more crystals if you do a 1:1 ratio of water to urea. 100ml of water should be 100g of urea, 50ml water:50g urea, 500ml water:500g urea, etc. The rest of your process is spot on those. Warm the water to help the urea dissolve and a drop of dish soap to help is spread across the surface
@@anthony_trillanes the way it works is, you put a first coat down of what ever bright/reflective paint/primer you want (the crystals dont stick to metal too well on their own and will make the piece look patchy when you wipe them away), cover it in the crystals, let them dry, then do a light dusting of your black paint over top. You dont have to go on heavy with the black, you want to allow the crystals to aid in the "shading". The crystals are water soluble, so you dont need to sand them hard or with any rough abrasive, a wet sponge will do the trick. What happens is, the paint adheres to the crystals and when you wipe them away, it reveals the bright/reflective base underneath. The thicker the crystal, the more black paint will adhere to it. The thinner the crystal area, the greater chance the paint will adhere to the base coat instead and thats what gives you the shading effect.
Hello thank for the video do you use the solution on the just base coat only or I can use it on base coat with clear coat to get the chrystal thank you again
Hey, this is a pretty cool trick and it saves some money I bet, for those on a budget. One question, does heating it when drying make the crystals grow differently or in a tighter pattern or do they grow the same way air drying or heat drying ? Thanks for the info on how to make it.
Hi there , yes when add water, the solution react and temperature drops, tha's why you have t to heat the water. You can make simple, just add "heated" water in a water bottle 500ml in a half of urea and shake it until all been disolved. That's it!
I picked up some urea from the hardware store. It came in pellets and is not completely white. Its urea by a company called Espoma. Any idea if this stuff will suffice?
It takes minimal effort really to set it all up and try it. Idea start there first then of it doeant give you the desired outcome look for answers. 🤷♂️ If its Urea it should work. If its granulated try breaking it up into a powder. In thinking the only disadvantage will be the time it takes to break it down in the water. The bigger the granules/ pellets, the longer it will take too dissolve. You cant just use more heat to do it either because it will evaporate the Urea. Try breaking it up and fallowing his steps here. Good luck
Another video a guy said use some alcohol in the mix to get the smaller tighter shapes, as the alcohol evaporates to cause the oxidisation to happen faster, setting off smaller clusters.. does that make sense to any one.
Thanks for the tutorial... but your urea looks like salt and the urea we get at our place is urea prill...( small balls like thing) is there any difference between the two?? Thank you
not really, heating it up is to just to increase the solubility of the urea. use a 1:1 ratio of urea and water, so 100ml water use 100g of urea. for best results use ox gall, or any other good surfactants.
Can any urea be used? I see many that are just labeled urea but not urea prill. I noticed some are for plant care and they look correct but that’s just a web photo so I can’t tell. Thanks for posting this.
@@GarasiPaintwork that's good to hear you're into gunpla to. By the way, the black paint you used after the crystals were formed, is it normal black or clear black?
After apply solutions to your project, dont left it too long, when the fx are formed you can directly spray your black. Ya, it's normal even your fx will gone..
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap. It's probably the silver paint I am using (Rustoleum enamel). It is oil-based, so it probably does not let water stick to it 🤔.
I tried this and got really bland crystal effects. The dish soap is essential so that it doesn't bead up, but i got really small crystal patterns, even when heating up and letting air dry How do i make sure those crystals get big and Chunky?
Sir I am new in you tube and while making a crystal painting video I used some clips from this video. Please give permission. If you have any problem I am ready to remove the video
No, if your result showing nice and smooth surface, and you can dry it with sunlight or just shade. You can see technical information at the package of your clear coat
@@pierrex3226 Поздрав из Бугарске, брате. Овде у БГ ово зовемо "карбамид" или "поликарбамид". Продају га као вештачко ђубриво. Опростите ми ако имам грешку. Користим гоогле транслате, иако су нам језици веома блиски. Поздрав брате! Желим вам добро здравље!
Where can you buy that urea? Anyone have a link... On Google I get many different products, such as cream for skin. I want to experiment with it, who can help me? Thank you in advance
From my experience, you get more crystals if you do a 1:1 ratio of water to urea. 100ml of water should be 100g of urea, 50ml water:50g urea, 500ml water:500g urea, etc. The rest of your process is spot on those. Warm the water to help the urea dissolve and a drop of dish soap to help is spread across the surface
Is destilled water better?
@@HerbertSimonDachs Distilled water didnt seem to have any different effect in experience
@@Maskeddude Thank you! 😊
Can you help me I am having issues with my surface tension I am using 1:1 mix heating to 160f applying on clear coat sanded to 600 also tried 800
@@anthony_trillanes the way it works is, you put a first coat down of what ever bright/reflective paint/primer you want (the crystals dont stick to metal too well on their own and will make the piece look patchy when you wipe them away), cover it in the crystals, let them dry, then do a light dusting of your black paint over top. You dont have to go on heavy with the black, you want to allow the crystals to aid in the "shading". The crystals are water soluble, so you dont need to sand them hard or with any rough abrasive, a wet sponge will do the trick. What happens is, the paint adheres to the crystals and when you wipe them away, it reveals the bright/reflective base underneath. The thicker the crystal, the more black paint will adhere to it. The thinner the crystal area, the greater chance the paint will adhere to the base coat instead and thats what gives you the shading effect.
Thank you for posting this guide in english. 👍
Sorry for bad english
Your english is fine Bro! Thanks again for the video!
Thanks bro I was stuck in the same I was waiting to dry for more time after some more time it got disappeared... Thanks once again
Thank you it was a big help to me for my home projects. Good job 👍
Recipe worked perfectly. Thank you so much
I didn't get the receipe
What color did you use
Blessed thanks alot . Can i use on home wall?
Thanks to share. Its a amazing effect.
Thank you so much for this bro ❤I was searching for this from long time ❣️
Hello thank for the video do you use the solution on the just base coat only or I can use it on base coat with clear coat to get the chrystal thank you again
Thank you for your time and help with this process.
Parabéns pelo belo trabalho quê faz! Obrigado por ter a coragem de ensinar sobre esta técnica... virei seu fã e espero ver mais vídeos teus.
Sílvio Roberto poder traduzi pra min
Sílvio Roberto poder traduzir pra min
Great!!! Thanx & Appreciate the English format!!! :)
Thank you..sorry for bad english..
Obrigado Por ensinar essa arte, me ajudou muito na parte que eu estava com dúvida!
Hey, this is a pretty cool trick and it saves some money I bet, for those on a budget. One question, does heating it when drying make the crystals grow differently or in a tighter pattern or do they grow the same way air drying or heat drying ? Thanks for the info on how to make it.
Ya, when you heat it, that will grow large pattern
Bro what is powder name
@@shaikirfanroyals3418 urea
@@KM-fckutube where did get this sir.
@@KM-fckutube what is urea? What does it mean in Turkish, which product😊
Could you specify what type of urea prill you used here? Thank you! im from denmark we have lots diffent of urea
Will this mixture stay good for a while in the bottle?
Is this the same urea used for lawn and garden?
Ya..that it is
Hi there , yes when add water, the solution react and temperature drops, tha's why you have t to heat the water. You can make simple, just add "heated" water in a water bottle 500ml in a half of urea and shake it until all been disolved. That's it!
Oh yes..that's another simple way..thank you
Awesome thanks a lot !a
I am going to use it . Thank you .
Hello and sorry for my English.
where to buy urea?
urea is a plant fertilizer? or urea to make cosmetics?
thanks friend
Ya urea for plant fertilizer
@@GarasiPaintwork very thanks my friend
Water should hot or after cooling have to use urea sir please please please tell
Tx for the knowledge 🤝
I wonder if we could use DEF for this? DEF and dishsoap?
It works
I picked up some urea from the hardware store. It came in pellets and is not completely white. Its urea by a company called Espoma. Any idea if this stuff will suffice?
It takes minimal effort really to set it all up and try it. Idea start there first then of it doeant give you the desired outcome look for answers. 🤷♂️ If its Urea it should work. If its granulated try breaking it up into a powder. In thinking the only disadvantage will be the time it takes to break it down in the water. The bigger the granules/ pellets, the longer it will take too dissolve. You cant just use more heat to do it either because it will evaporate the Urea. Try breaking it up and fallowing his steps here. Good luck
Followed your recipe and the crystals grew either very small hard to see or lifted off the base. What went wrong?
Let it dry under sun, try it
What color did you use???
Another video a guy said use some alcohol in the mix to get the smaller tighter shapes, as the alcohol evaporates to cause the oxidisation to happen faster, setting off smaller clusters.. does that make sense to any one.
Is there a certain kind of urea to use I tried and I can't get it to work
muchas gracias por detallar cómo se hace hacías un tiempo que buscaba saber cómo era preparación y de nuevo muchas gracias....
Cuáles son los ingredientes
Hello brother, the effects made by other people are bigger, like 3D, I wonder why yours is not like that?
Thanks for the tutorial... but your urea looks like salt and the urea we get at our place is urea prill...( small balls like thing) is there any difference between the two?? Thank you
Noo one n the same
Hello, could the water be preheated and then the urea added? Does it make any difference? Thankyou
not really, heating it up is to just to increase the solubility of the urea. use a 1:1 ratio of urea and water, so 100ml water use 100g of urea. for best results use ox gall, or any other good surfactants.
@@Thisniggatrippin Ok, thankyou
Pls pls sir translate Hindi. I'm in India. Love you sir.
Can any urea be used? I see many that are just labeled urea but not urea prill. I noticed some are for plant care and they look correct but that’s just a web photo so I can’t tell.
Thanks for posting this.
You can try one by one, i think all urea can be used.
@@GarasiPaintwork This did not work, for what it's worth.
200 g of Urea? That looks like a whole lot more.
What is your project media?
If didn't work, maybe you make a wrong step for making a solution
@@GarasiPaintwork that's what I thought. So I tried it a second time. Still not working. I am applying it to a primed wood panel.
Could you specify what type of urea prill you used here? Thank you!
Inikan yg kek di helm kita itu bg.. mantaplah itu...
Gan mau tanya nih..
Itu pake pupuk urea seperti jenis apa ya?
Bermacam2 kan itu.
After the sulution finish. You can use it? Or you have to whait some time? And after when you use it how much time you need for the crystals to work?
Just wait for normal temp solution and ready to use..
when I mix the ingredients the mixture becomes very cold. that is, I had to wait for the mixture to warm up? and then i use it?
Perfect 😂😂boss
Nice video. Just want to ask if it's safe to plastic model kits? Planning to do this effect on my gunpla.
I think 100% safe, cause this just water and urea.
Oh.. Great.. We have same hobby.. 😁
@@GarasiPaintwork that's good to hear you're into gunpla to. By the way, the black paint you used after the crystals were formed, is it normal black or clear black?
Ya just normal black
@@GarasiPaintwork I tried it and it worked, but left it for a few hours then the effect evaporates. Is that normal?
After apply solutions to your project, dont left it too long, when the fx are formed you can directly spray your black.
Ya, it's normal even your fx will gone..
Can I use it on the clearcoat applied 1 year ago. its my cars hood. please guide
Absolutely, but first wet sand with grit 1000 and apply like at this video
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap.
It's probably the silver paint I am using (Rustoleum enamel). It is oil-based, so it probably does not let water stick to it 🤔.
Bro did u got the solution..even i am getting same problem it disappearing
Not sticking properly
@@ChinnBabu-zi4sh Nah I gave up on it already. Got tired of it.
motif garis2 ini namanya apa?
sy lg cr yg bs buat sperti ini di Bali
What type of urea is this? 40-0-0 or 46-0-0?
Thank you very much
Nyc
What is urea?
I tried this and got really bland crystal effects. The dish soap is essential so that it doesn't bead up, but i got really small crystal patterns, even when heating up and letting air dry
How do i make sure those crystals get big and Chunky?
I think your solution is too hot, but keep in try..
Stay safe
Sir I am new in you tube and while making a crystal painting video I used some clips from this video. Please give permission. If you have any problem I am ready to remove the video
Link?
Which type of basecoat should I use and should I use topcoat before crystallizing
Choose yourself, and must use top coat.
Thanks for reply ! I had some more questions. Do I need to sand the clear coat and does it require sunlight to dry ? Does it dry under shade ?
No, if your result showing nice and smooth surface, and you can dry it with sunlight or just shade. You can see technical information at the package of your clear coat
Kansas color used??
Thank u so much ❤❤❤
Which fertilizer works?
Urea
Anh có thể cho công thức bằng tiếng việt nam được ko. Xin chân thành cảm ơn anh
In which shops
Can it work on a 110scale rc car plastic lexan clear body shell on the inside off the body shell
I think not work, will work if you paint it outside
that it will not run down on the vertical elements of the car body
Thank you!
what is the correct name of this product? I'm from Serbia, so I'm interested in whether it can be found on eBay
Urea. Most common fertilizer in the world. It's in human urine as well :)
@@pierrex3226 Поздрав из Бугарске, брате.
Овде у БГ ово зовемо "карбамид" или "поликарбамид".
Продају га као вештачко ђубриво.
Опростите ми ако имам грешку. Користим гоогле транслате, иако су нам језици веома блиски.
Поздрав брате! Желим вам добро здравље!
46 percentage pure urea?
Thank you big sir
Hello sir bace silver autopaint or pu
How to use any paint
Thank you
Thanks. Trying out
Itu jangka waktu pakai sampai brapa lama bang?
Selama ini gak ada batas waktunya bang...
Thank you 🙏🏼
Is this solution put on the clear ?? Paint tank silver, clear then solution ??
No..after silver you can puy this solution
@@GarasiPaintwork Thank you will try tomorrow only one more question when you heat solution to what temperature do you want it ?
Just like room temperature, or you can just use warm water
@@GarasiPaintwork thank you
Will this work on plastic?
Yess of course
~ Hi, trying this process on crafts but what is... BLACK COAT? THANKS
Just aerosol paint
Can you spray a car with it
Product neme and quantity plz
Saya pernah coba pake pupuk urea yg warna biru. Tapi ga ada reaksinya. Memank harus dipanasin dulu ya?
Itu dipanasin,kaya panas2 kuku apa gimana?
Garasi Paintwork oke makasih
larutan bisa berathan berapa lama bang? ato larutan bisa basi kalo di diamkan setelah pemakaian?
Gak basi bg..
berarti bisa dipake untuk terus ya bang. oke bg. thanks ilmu nya
pakek pupuk urea yg apa tu bang,
Pupuk urea apa aja bg
What's the urea used for, where can I find it..?
I use standart urea fertilizer..
@@GarasiPaintwork so the best place to find it is on a agriculture store..?
Yup.. That's right
Urea 40-0-0 po ba yan boss?
Saya bikin ko retakannya ga kasar gtu mas...halus...trus klo d bilas hilang
whats the use of dishwashing soap plz?
You just can use regular dishwashing soap at home
@@GarasiPaintwork thank you ,but i think you misunderstood my meaning ...i mean ,why you put the dishwashing soap in?
Where can you buy that urea? Anyone have a link... On Google I get many different products, such as cream for skin.
I want to experiment with it, who can help me? Thank you in advance
Anu yung urea san pde maka bili?
Tu apa saja bahan y bg..dpanasin pakai tiner tu bgg
Would UREA SUL fertilizer work?
Saya sdh coba seharian, tp kristal nya jarang panjang, hanya berkisar 1-2 cm. Penyebabnya apa y mas?
Mohon bantuannya
Mgkin terlalu lama keringnya mas, coba dijemur...
Where we can get urea prill
Home depot store
It's work for wall painting
Bang kalo bikin kristalnya agak besar dan panjang di gimanain yah bang.
Saya bikin pendek dan kecil mulu... Mohon pencerahannya bang
Coba dijemur dipanas bg..krna yg pernah saya coba..klo di diemin aja tanpa dijemur, memang jadi nya kecil2
padalah pake hedraiyer bang
Obrigado valeu!!!!!!
Itu sabunnya brpa tetes mas..?
Secukupnya aja mas...
Product neme plzz 😢
What is urea prill?
Fertilizer you can get on grocery store.
Nitrogen fertilizer ?
Yes that is
Thank you sir , 🤘
plz explain what is urea😔😭😑
You can googling
@@GarasiPaintwork ok i see
@@GarasiPaintwork ready made spray available?
Si this the same urea pee?
Yes you right
@@GarasiPaintwork really? 🤔
I copied the same steps and didn't get a single crystal!
Gan itu apa urea putih bukan yg merah
Sama aja mas..
Water should be worm re
Por quanto tempo dura essa soluça guardada
Urea mins Urea fertilizer
Yess
Its not working
mana keranjang kunignya
anyone tried this ?