I asked in a previous out bullet seating in regards to the rifling lands. And by all the stuff on the you tube I was about ready to consult a wiggle board. BUT a your advice set me straight on this subject. I have never had a fire arm question pop up in my head that man has not answered in plain on the spot terms! This man is a national Treasure to the shooting public!
Good stuff GunBlue! I started with a Lee Turret Press back in 2019 and I see no change to upgrade at this point. I don't shoot a bunch, so my batches are usually 100 or so and the Lee Turret Press has always worked great for my needs. I have switched it up a few times over the years as I've upgraded to some better equipment, but the core press has remained the same. Always enjoy your videos! 👍
I can see how thru your experience loading you have arrived to the most simplistic and no nonsense way of this. I love the fact you've taught me to not fall for all the hype. Being 36 I've come up with all the flashy stuff being pushed on advertising and magazines.. so boy you've saved me a lot of trouble and wasted money. Thanks
Proverbs 27:17 Iron sharpeneth iron; So a man sharpeneth the countenance of his friend. Whoso keepeth the fig tree shall eat the fruit thereof: So he that waiteth on his master shall be honoured. Thank you for another wonderful lesson.
I have been reloading for about a year and a half now mostly 45acp and various 30cal WW2 rifle calibers (7.5x54MAS, 6.5x50R Japanese, 30-06). These are fantastic videos on the basics of reloading. Thanks for explaining your steps so thoroughly and patiently. I also have noticed that you reply to your comments regularly which is good to see. I am looking forward to future videos. Especially the shotshell videos since I recently came into a MEC press that needs some TLC and I have no idea how it works...
Your reloading series is very good with lots of valuable information. I use basically the same system as you. I've been using the new Lee Powder Drum measure and am pleased with it so far. It allows one to have a separate drum pre-set for each commonly used powder-load. I don't have a nice loading room or bench since I live in an apartment. I mounted my turret press on a cutting board and I clamp it firmly to the bar when I want to reload.
Fantastic series. Iv'e seen all your videos (even Benny's Haircut)Thank you for your time and wisdom. I pray you continue making videos. I hope my son will enjoy them as much as I.
I do not reload rifle and probably never will, I'm a 9mm, .45acp and .380acp reloader. But, I found your series very informative. Thank you for your time and effort.
Great series on reloading. Very detailed. Thanks for the time and effort. Obviously you have taught in other areas over the years, and it shows. Thanks!
I still like my RCBS Single Stage system. If I'm planning to make some rounds, I first prime the cases a few days in advance. When I begin to load, I do about 200 at a time. The cases have already been de-primed, cleaned (including primer pocket, a pin tumbler takes care of that with cleaning,) sized and belled. So it's 200 powdered (check each tray once it's finished with a small 2 AA battery flashlight,) set 200 bullets (50 at a time, one tray,) seat the 200 bullets, and then crimp 200 bullets. I can do 400 per day pretty easily, 800 is some work. It's how I find my Zen. With a single stage press, I can "feel" the tension as each bullet is seated, likewise for the crimp.
There is a certain type of guy that will always badmouth Lee products, it’s amazing to see grown men throwing tantrums like spoiled children and they will curse at that product like it was a dog that just wet the bed. I was taught by my elders that any piece of machinery no matter how complicated or simple will require a learning curve, break in period, proper maintenance and some adjustment. I have yet to come across a product by Lee that has not performed as advertised and if there is something wrong they will take care of it.
Great video's, really appreciate it. I use two Lee Pro 1000's and a Lee single stage.... I have used the Disk Powder Measures for years, they work well.... however, I started using the new Auto Drum Powder Measure.... I will never go back to the Disk Measure! I have found the Drum Measure to be much simpler, easier, and consistent.... I bought two and mounted them on my Pro 1000,s.... I'll be buying another one.... the old Disk Measures are in the far back. dark corner of my reloading storage... that's probably where they will stay.
It looks like a well designed measure, especially when larger charges are needed. I have also found that the Lee adjustable measure for the disk system is exceptionally precise for dialing in particular handgun charges, though it's volume is limited. My Redhawk likes a certain volume of H-110, and it drops it perfectly, with no leakage of this extremely fine powder. But I certainly will try the drum. Thank you.
hi Gun Blue thank you for taking the time to make these great tutorials i love the the way you cut through the marketing bs and get to the nuts and bolts of how things work. After watching your videos and taking on board your advice i have bought a sako 75 chambered in 270 winchester, being a pre owned rifle i was a little worried how it would shoot but after trying it out last night i was very impressed with the results.i am looking a reloading and was wondering if you had some good recipies for my set up. Thank you once again keep up the good work.
Might I add that a semi progressive press can be an asset and very useful if someone has slight physical handicaps as well. I almost lost my arm about 6 months ago in a vehicle accident so have very limited movement with it. I purchased the lee turret press shortly after that and it has been working flawless. I typically do around 125 rounds of 9mm every week with no issues and with the semi progressive it can help speed up the process a bit, just gotta be attentive. Great press and if you want to use it as a signed stage just pull the indexing rod out. +GunBlue490 have you had a chance to try out the auto drum powder measure yet? Very slick set up, easy to set up and Is very consistent. Highly recommended. Thanks for the videos sir, very informative and greatly appreciated, God Bless!
Jesse Van Damme Regarding the measure; no, I have not. The principle reason is simply a lack of need at this time. When loading with the Loadmaster, I already have loads worked up which are very nicely accommodated with the Lee Disk system, whether with disks or the adjustable adapter. My Classic Turret press is used mostly for bolt action rifles where I only use two stations in single stage mode for neck sizing and bullet seating, and I simply charge powder conventionally with my old RCBS Uniflow measure. The only exceptions may be with my 30-06 Garand, the 300 Savage, and 32 Winchester Special, as I would use a full turret in progressive mode with them, adding a crimp. It appears to be a very nice measure that would be ideal for these.
+GunBlue490 Thank you for the quick reply, yes that makes sense, the auto drum came with my turret press kit. But as for the auto disk, if it ain't broke don't fix it lol. The auto disk says it's good up to 80 grains of powder, which I suppose vary depending on the density of the powder. I haven't had to go over 45 so I couldn't comment on that claim but for my needs it's been fantastic. I'd like to thank you again for the effort you put into your videos, I only hope someday I will be as knowledgeable as you are, in recent months I've taken a much greater interest into firearms and anything to do with them, read read read is what I've been doing with my time. I assume you've gained much of your knowledge from literature. Do you have any favourite books or recommendations?
Jesse Van Damme The largest case that I reload in my Loadmaster is 44 Magnum, which is easily handled with the disk system, which has the capacity for most 308 charges. However, if I were starting fresh again, I would certainly opt for the auto drum's simplicity.
Thank you for your excellent reloading series. I have used the Lee Disc Powder system too. For the most part it has done well. Sometimes though, it gets gummed up, the powder clumps in it. I have used dryer static sheets and a ground wire and it helps. Do you have any tips on keeping the powder dumping consistently?
I have a ruger american in 6.5 creedmore the Speer manual tells me that coal is 2.760 for 140gr hot core Speer bullet . I have measured my rifle and the jam with this bullet is measuring 2.715 .if I seat theses bullets at 2.700 is it safe to load that short . Or will it cause to much pressure. It puts the bullet .430 deep in case
I am curious as to why there is a limit to the amount of powder that can be dispensed, could there not be another disk added to the system making it a 3 disk set.
That's a question you would have to address to Mr. Lee. I personally believe that such a complex array of disks would pose far too great a risk of mixup, and there is really no need. The 2 disks cover most 308 based cases, and for the larger ones, it's a very simple matter to use a drum measure that's better suited, more precise with large charges, and far less complicated to set up on the rifle charging die. The disk system was originally for pistol cases, and even the 2 disks stretch caution, requiring a good deal more attention to detail. I'm going to cover heavier cases in due time.
Proverbs 27:17 Iron sharpeneth iron; So a man sharpeneth the countenance of his friend. Whoso keepeth the fig tree shall eat the fruit thereof: So he that waiteth on his master shall be honoured.
Progressive reloading is like weapon of mass destruction. New reloader should be aware that you can destroy a lot of brass, powder and bullets very fast. I have seen new reloaders undoing 800 rounds that were loaded incorrectly. When I see someone with a fully progressive system, I say to them be careful you don't completely cut yourself out of your hobby. I like to be a part of each step of reloading (man in the loop not man out of the loop).
Holy smokes. That's enlightening info, for sure. Where do you see these new reloaders? And, where do they appear to you with progressive presses? The next time I see a new reloader with a progressive press in my travels, I'll certainly warn him not to get tangled up undoing 800 rounds! ;-)
I asked in a previous out bullet seating in regards to the rifling lands. And by all the stuff on the you tube I was about ready to consult a wiggle board. BUT a your advice set me straight on this subject. I have never had a fire arm question pop up in my head that man has not answered in plain on the spot terms! This man is a national Treasure to the shooting public!
Good stuff GunBlue! I started with a Lee Turret Press back in 2019 and I see no change to upgrade at this point. I don't shoot a bunch, so my batches are usually 100 or so and the Lee Turret Press has always worked great for my needs. I have switched it up a few times over the years as I've upgraded to some better equipment, but the core press has remained the same. Always enjoy your videos! 👍
I can see how thru your experience loading you have arrived to the most simplistic and no nonsense way of this. I love the fact you've taught me to not fall for all the hype. Being 36 I've come up with all the flashy stuff being pushed on advertising and magazines.. so boy you've saved me a lot of trouble and wasted money. Thanks
Proverbs 27:17
Iron sharpeneth iron;
So a man sharpeneth the countenance of his friend.
Whoso keepeth the fig tree shall eat the fruit thereof:
So he that waiteth on his master shall be honoured.
Thank you for another wonderful lesson.
I have been reloading for about a year and a half now mostly 45acp and various 30cal WW2 rifle calibers (7.5x54MAS, 6.5x50R Japanese, 30-06). These are fantastic videos on the basics of reloading. Thanks for explaining your steps so thoroughly and patiently. I also have noticed that you reply to your comments regularly which is good to see. I am looking forward to future videos. Especially the shotshell videos since I recently came into a MEC press that needs some TLC and I have no idea how it works...
Your reloading series is very good with lots of valuable information. I use basically the same system as you. I've been using the new Lee Powder Drum measure and am pleased with it so far. It allows one to have a separate drum pre-set for each commonly used powder-load. I don't have a nice loading room or bench since I live in an apartment. I mounted my turret press on a cutting board and I clamp it firmly to the bar when I want to reload.
Fantastic series. Iv'e seen all your videos (even Benny's Haircut)Thank you for your time and wisdom. I pray you continue making videos. I hope my son will enjoy them as much as I.
I do not reload rifle and probably never will, I'm a 9mm, .45acp and .380acp reloader. But, I found your series very informative. Thank you for your time and effort.
Very well done! I wish I had seen this series of video's when I started reloading.
Great series on reloading. Very detailed. Thanks for the time and effort. Obviously you have taught in other areas over the years, and it shows. Thanks!
My education continues. Gun Blues Course is worth any amount. Thanks.
I still like my RCBS Single Stage system. If I'm planning to make some rounds, I first prime the cases a few days in advance. When I begin to load, I do about 200 at a time. The cases have already been de-primed, cleaned (including primer pocket, a pin tumbler takes care of that with cleaning,) sized and belled. So it's 200 powdered (check each tray once it's finished with a small 2 AA battery flashlight,) set 200 bullets (50 at a time, one tray,) seat the 200 bullets, and then crimp 200 bullets. I can do 400 per day pretty easily, 800 is some work. It's how I find my Zen. With a single stage press, I can "feel" the tension as each bullet is seated, likewise for the crimp.
There is a certain type of guy that will always badmouth Lee products, it’s amazing to see grown men throwing tantrums like spoiled children and they will curse at that product like it was a dog that just wet the bed. I was taught by my elders that any piece of machinery no matter how complicated or simple will require a learning curve, break in period, proper maintenance and some adjustment. I have yet to come across a product by Lee that has not performed as advertised and if there is something wrong they will take care of it.
Great video's, really appreciate it. I use two Lee Pro 1000's and a Lee single stage.... I have used the Disk Powder Measures for years, they work well.... however, I started using the new Auto Drum Powder Measure.... I will never go back to the Disk Measure! I have found the Drum Measure to be much simpler, easier, and consistent.... I bought two and mounted them on my Pro 1000,s.... I'll be buying another one.... the old Disk Measures are in the far back. dark corner of my reloading storage... that's probably where they will stay.
It looks like a well designed measure, especially when larger charges are needed. I have also found that the Lee adjustable measure for the disk system is exceptionally precise for dialing in particular handgun charges, though it's volume is limited. My Redhawk likes a certain volume of H-110, and it drops it perfectly, with no leakage of this extremely fine powder. But I certainly will try the drum. Thank you.
hi Gun Blue thank you for taking the time to make these great tutorials i love the the way you cut through the marketing bs and get to the nuts and bolts of how things work. After watching your videos and taking on board your advice i have bought a sako 75 chambered in 270 winchester, being a pre owned rifle i was a little worried how it would shoot but after trying it out last night i was very impressed with the results.i am looking a reloading and was wondering if you had some good recipies for my set up. Thank you once again keep up the good work.
Might I add that a semi progressive press can be an asset and very useful if someone has slight physical handicaps as well. I almost lost my arm about 6 months ago in a vehicle accident so have very limited movement with it. I purchased the lee turret press shortly after that and it has been working flawless. I typically do around 125 rounds of 9mm every week with no issues and with the semi progressive it can help speed up the process a bit, just gotta be attentive. Great press and if you want to use it as a signed stage just pull the indexing rod out. +GunBlue490 have you had a chance to try out the auto drum powder measure yet? Very slick set up, easy to set up and Is very consistent. Highly recommended. Thanks for the videos sir, very informative and greatly appreciated, God Bless!
Single stage*
Jesse Van Damme
Regarding the measure; no, I have not. The principle reason is simply a lack of need at this time. When loading with the Loadmaster, I already have loads worked up which are very nicely accommodated with the Lee Disk system, whether with disks or the adjustable adapter. My Classic Turret press is used mostly for bolt action rifles where I only use two stations in single stage mode for neck sizing and bullet seating, and I simply charge powder conventionally with my old RCBS Uniflow measure. The only exceptions may be with my 30-06 Garand, the 300 Savage, and 32 Winchester Special, as I would use a full turret in progressive mode with them, adding a crimp. It appears to be a very nice measure that would be ideal for these.
+GunBlue490
Thank you for the quick reply, yes that makes sense, the auto drum came with my turret press kit. But as for the auto disk, if it ain't broke don't fix it lol. The auto disk says it's good up to 80 grains of powder, which I suppose vary depending on the density of the powder. I haven't had to go over 45 so I couldn't comment on that claim but for my needs it's been fantastic. I'd like to thank you again for the effort you put into your videos, I only hope someday I will be as knowledgeable as you are, in recent months I've taken a much greater interest into firearms and anything to do with them, read read read is what I've been doing with my time. I assume you've gained much of your knowledge from literature. Do you have any favourite books or recommendations?
Sorry the auto drum says it's good to 80*
Jesse Van Damme
The largest case that I reload in my Loadmaster is 44 Magnum, which is easily handled with the disk system, which has the capacity for most 308 charges. However, if I were starting fresh again, I would certainly opt for the auto drum's simplicity.
Excellent series. Thanks for sharing your experience.
Thank you for your excellent reloading series. I have used the Lee Disc Powder system too. For the most part it has done well. Sometimes though, it gets gummed up, the powder clumps in it. I have used dryer static sheets and a ground wire and it helps. Do you have any tips on keeping the powder dumping consistently?
Great video. Step by step. Nice.
I have a ruger american in 6.5 creedmore the Speer manual tells me that coal is 2.760 for 140gr hot core Speer bullet . I have measured my rifle and the jam with this bullet is measuring 2.715 .if I seat theses bullets at 2.700 is it safe to load that short . Or will it cause to much pressure. It puts the bullet .430 deep in case
Thank you GunBlue490
Thank you for another excellent and informative video .
I am curious as to why there is a limit to the amount of powder that can be dispensed, could there not be another disk added to the system making it a 3 disk set.
That's a question you would have to address to Mr. Lee. I personally believe that such a complex array of disks would pose far too great a risk of mixup, and there is really no need. The 2 disks cover most 308 based cases, and for the larger ones, it's a very simple matter to use a drum measure that's better suited, more precise with large charges, and far less complicated to set up on the rifle charging die. The disk system was originally for pistol cases, and even the 2 disks stretch caution, requiring a good deal more attention to detail. I'm going to cover heavier cases in due time.
Proverbs 27:17
Iron sharpeneth iron;
So a man sharpeneth the countenance of his friend.
Whoso keepeth the fig tree shall eat the fruit thereof:
So he that waiteth on his master shall be honoured.
Terrific.
You have went over jump ,but when is it top much
The biggest problem I have with semi and progressive press is the fact that I can't check my cases with flashlight to make sure they are charged.
Progressive reloading is like weapon of mass destruction. New reloader should be aware that you can destroy a lot of brass, powder and bullets very fast. I have seen new reloaders undoing 800 rounds that were loaded incorrectly. When I see someone with a fully progressive system, I say to them be careful you don't completely cut yourself out of your hobby. I like to be a part of each step of reloading (man in the loop not man out of the loop).
Holy smokes. That's enlightening info, for sure. Where do you see these new reloaders? And, where do they appear to you with progressive presses? The next time I see a new reloader with a progressive press in my travels, I'll certainly warn him not to get tangled up undoing 800 rounds! ;-)