Great job. So what I’d the solution to fix those parts. Does the magnet need to go from one fix place and then it moves to the second space. Where should that magnet be placed in order to move to open and close. Was there a broken bracket that the magnet needs to be?
No, the magnet on each sensor one is opened sensor, another one is closed sensor the 1cm square metal pice as you can see in video i manually moved it from closed sensor to opened sensor let sensor get the signal send to ecm then pcm will know the roof at opened or closed position then ecm will does the next funtion That metal pice came off from roof latch Finaly in this video the roof latches need replaced fixed problem
OMG...Thank you, I've trying to troubleshoot this for 9 months. Great job! Would you be so kind as to share the device and software that you are using? Perhaps you know of a cost effective alternate? So far I have replaced the broken gears in windshield cowl motor a the l shaped screw arms. They seam to work fine now. Mine were cracked as well and since I already had it apart why not replace them. I really need get your diagnostic tool. Again thank you.
Diagnostics the most important If you sure components are bad just replace them Before you replace them should know what cause they broken or by time the material quality changed Just research on google he will bring you some websites sold the parts, eBay has everything
@@AutomotiveServiceExcellence link? I saw one but it said the magnet wasn’t included that i had to remove it from mine and transfer it and i don’t have the magnet
@@AutomotiveServiceExcellence Nope I am referring to the convertible seal (the one that presses up against the windshield cowl seal) did it just slide off once you unbolted the two T bolts on each side?
My left side latch is locked shut.. I tried removing the side and useing a 5mm hex but there is no bolt inside the hole for the 5mm hex! I guess my top is locked for LIFE now.. hahaha
@@AutomotiveServiceExcellence ok. Thanks. I might just end up selling the car. This top has me so frustrated. I would be so much happier to get a non convertible. " Dealing with the top leaking and the locking top issues I really don't recommend a convertible bmw. They have a very bad fail rate.
I CANNOT Believe this video popped up just when i needed it.
Why not
@@AutomotiveServiceExcellence its just perfect timing. the BMW community has clamored for a video like this for YEARS. thank you for your work!
@@AutomotiveServiceExcellence It was a compliment to you
Great job. So what I’d the solution to fix those parts. Does the magnet need to go from one fix place and then it moves to the second space. Where should that magnet be placed in order to move to open and close. Was there a broken bracket that the magnet needs to be?
No, the magnet on each sensor
one is opened sensor, another one is closed sensor
the 1cm square metal pice as you can see in video i manually moved it from closed sensor to opened sensor let sensor get the signal send to ecm then pcm will know the roof at opened or closed position then ecm will does the next funtion
That metal pice came off from roof latch
Finaly in this video the roof latches need replaced fixed problem
OMG...Thank you, I've trying to troubleshoot this for 9 months. Great job! Would you be so kind as to share the device and software that you are using? Perhaps you know of a cost effective alternate?
So far I have replaced the broken gears in windshield cowl motor a the l shaped screw arms. They seam to work fine now. Mine were cracked as well
and since I already had it apart why not replace them. I really need get your diagnostic tool. Again thank you.
@@carronagringa unfortunately he has not responded. I'm hoping that he will eventually. I'm not giving up.😄
@@carronagringa Unfortunately he hasn't responded
@@carronagringa use this link for software www.e46fanatics.com/threads/one-click-inpa-install-and-upgrade-to-ista.1227470/
I was using the Luanch 431v + scanner
@@carronagringa Thank you Leo. What did you finally determine the problem was?
Can’t understand a fucking word but a job well done sir. Sorry about Vietnam
😭😭😭😭😭
I have same problem i did open mine and it was broken the light was flashing like yours could it be the same issue?
Great video step by step fix very good
What tools do I need to open the cover? Can you provide me a list brother?
How did you fix it? What keeps the magnet on the sensor?
Replaced the roof latches
I’d be interested in having diagnose my 2001 BMW 330ci. How can I contact you?
Hi canmi send you my video of my issue with my bmw 120i roof which won't open thanks Trev in cape town south africa
Great video, thx - What app are you using for diagnostics?
I used Launch 431 + scan tool
Hi my name is Jorge I have the problem dont unlock the latch include I find is jam but Idont open , is posible pull the latch out side thanks
Did you try manually open
Hey boss do you know the part number of the sensor because my is missing and that's why my top.its not opening please and thank you so much
No sorry
I don’t remember
Hi if these latches are broken does it leads to electric leaks cz when these latches broke the battery drains
Is there any link between these?!
No
If they are broken they don’t cause draining battery
Bro my locks are broken and hydrolic stopped working what should I do now and if must put new where will I get it
Diagnostics the most important
If you sure components are bad just replace them
Before you replace them should know what cause they broken or by time the material quality changed
Just research on google he will bring you some websites sold the parts, eBay has everything
Where can i get the metal magnet ? Mine doesn’t have one
You need to replace the roof latch assembly
Search for ebay
@@AutomotiveServiceExcellence link? I saw one but it said the magnet wasn’t included that i had to remove it from mine and transfer it and i don’t have the magnet
You guys love your videos but when I ask for advice no one replies
I saw your question so in the video no body know what cause that
Sorry Bro!
What software is that your using to scan ?, i have an odb2 scanner but need that software that lets you access convertible top functions
I was using Luanch 431v + scanner
What is the tool you using
Is this also how you remove the top seal?
Do you mean the roof latches cover ?
if so, in the video from 11:35 to 12:30
@@AutomotiveServiceExcellence Nope I am referring to the convertible seal (the one that presses up against the windshield cowl seal) did it just slide off once you unbolted the two T bolts on each side?
Lâu không thấy chú làm videos tiếng việt nữa.
Chắc chú muốn chia sẻ a em thợ toàn cầu chứ ko riêng vn. A em việt toàn chế nên khó áp dụng
Chú mới làm lại kênh tiếng Việt, sau này các cháu xem tiếng Việt thì xem bên này
www.youtube.com/@HandymanVlogs
Hi I need help by any work shop by repair my top BMW 2003 E46 one latch is Jam , Dont work please
Thank you
i want to learn more about you. so what must i do?
Chú mới làm lại kênh tiếng Việt, sau này các cháu xem tiếng Việt thì xem bên này
www.youtube.com/@HandymanVlogs
how to replace the plastic when finish
My left side latch is locked shut.. I tried removing the side and useing a 5mm hex but there is no bolt inside the hole for the 5mm hex! I guess my top is locked for LIFE now.. hahaha
Lol!!!
Do you think I could cut the plastic trim under the latch to get to the bolts to the latch?
No Bro
You need to break loose the screws inside to hold the plastic cover
They are inside the roof cover
@@AutomotiveServiceExcellence ok. Thanks. I might just end up selling the car. This top has me so frustrated. I would be so much happier to get a non convertible. " Dealing with the top leaking and the locking top issues I really don't recommend a convertible bmw. They have a very bad fail rate.
Sao mấy cái video củ của anh ko tìm được nữa vậy
Chú mới làm lại kênh tiếng Việt, sau này các cháu xem tiếng Việt thì xem bên này
www.youtube.com/@HandymanVlogs
Can I bring my car for you to fix?
Welcome!
I live in California
where is this man's workshop
California USA
Sau lúc này chú nói tiếng anh ko vậy chú
Chú mới làm lại kênh tiếng Việt, sau này các cháu xem tiếng Việt thì xem bên này
www.youtube.com/@HandymanVlogs
Excellent
Big help
How can I contact you by email?
1:15
I don't understand a word you say.
What is the scanner you are using?
It is Luanch 431V+