How-to Seam the edge of a mirror I Tips & Guide
HTML-код
- Опубликовано: 18 янв 2010
- In this video I show you how we "seam" or lightly sand the edge of the mirror. This gives it a nice safe edge.
Learn more at www.woodstove-fireplaceglass.com
#tips #guide #homebuddy #DIY #woodstoveglass #fireplaceglass #woodstovefireplaceglass
Woodstove Fireplace Glass
"The View you want...With the glass you need."
www.woodstove-fireplaceglass....
(217) 223-0999
3429 Northwood Dr. Quincy, IL 62305
Follow and tweet us on twitter : WoodStoveGlass
Follow us on Instagram: woodstovefireplaceglass
Like & follow us on Facebook: woodstoveglass
Subscribe us on RUclips: myglasstrades
Fireplace Store
Wood Stove Shop
Wood Stove Glass
Fireplace Glass
Glass Installation
Fireplace Glass Repair
Areas Served:
California, Oregon, Washington, Idaho, Montana, Wyoming, Utah, Colorado, Minnesota, wisconsin, michigan, Pennsylvania, New york, Vermont, Maine, New Hampshire, Massachusetts, New Jersey - Хобби
Thanks for a clear, easy to understand video showing a successful edge.
Now I have an edge on my sharp table glass problem. Thanks.
thanks!
when i saw your finger running down that edge at first i was crying! If tat had been my nad it would be missing a thumb right now ahhahaha.
using a higher grit sand paper and sanding down the corners works well. but make sure you wet the belt down and continue to spray water on the glass as you sand it. otherwise the glass gets too hot and will chip. Then use a lighter grit to give it a better finish.
mike how do you recommend to wear out a new 200 grit belt ?
Hi mile can you tell me how composing glass (double glass
)
Thanks, I'll give it a shot. Aloha!!
I think you are supposed to use water and a good sealing dust mask to avoid silicosis
So I saw these glass sanding bands for a portable belt sander, but I'm not sure if I need to use water, because it's not a wet band sander. Any help?
Hi, how do you round the corners of a table top glass to the size of a $0.25 quarter?
Thanks!
great job, the seam edge is the easy way to protect the people from the clean cut mirror edge
Very true! Makes it easier to handle.
@@myglasstrades yeah right
Am I the only one that was super worried about him cutting himself while rubbing the edges of the mirror?
Thank you, we appreciate your concern! if for any reason you need help in finding a perfect glass for your woodstove or fireplace, you can call us anytime for your glass needs! 217-223-0999 or visit our website www.woodstove-fireplaceglass.com
Surely the fine dust particles must be dangerous of ingested into your lungs
I want to buy that machine
how its called the machine hand u used????
A belt sander.
Brother, how much is this machine?
Sir parchage this machine pls tellme why
can someone tell me how to remove waste like 2mm in a piece of glass?please help i dont know anything about glass :/
See video XDco0E9syWs
yes thks just got to see it .
What's it's name
Hi, This is a glass blow molding machine
200 grits to seamed the edge ?
120