A friend replaced his clutch but the pedal wasn't very smooth. I was helping him replace the clutch master cylinder but it didn't help. Pulling from my LHT knowledge, I asked him if he replaced the bearing guide while he was in there. Unfortunately, he didn't. A few weeks later I got this message... ***"FYI My clutch issue was in fact the release bearing guide I replaced both guide and bearing, and properly lubricated with Honda grease, and my S is back to wonderful 😎 Things to remember, replace the $35 guide when replacing the clutch, and lubricate as instructed"*** I recommend LHT often.
Just discovered your channel after i got my AP1. You are exactly the type of mechanic we all need, the car guys mechanic. The attention to detail is insane, it's a shame you're on the wrong coast.
Hey John! I ordered one of your brake master cylinder braces and install took less than 5 mins, and now the pedal pressure feels so good! it's nice and stiff now, it used to make a little clicking sound before if I pressed too hard on it and now it's gone! Must have been flex in the firewall...great product and it looks great!
Thanks for all these great informative videos. I am waiting on the parts to change my clutch master cylinder. Going to do the slave too. I don't have the maintenance history of this car and bought it as a project in the fall. So my thinking is to do it at the same time. How hard is it to get the clutch pedal off? The leak from the master cylinder has rusted the clutch pedal. So i want to take it off remove the rust and refinish it. You asked about preventing rodents in the video. I use little sonar speakers that plug into a receptacle. I have one on each side of the garage. They seem to work well. I am in Toronto Canada. So in the winter months when i am not driving my summer cars I am always worried about the car becoming a home for animals seeking refuge. Has worked so far.
@@LHTPerformance Billman says the Red Box is gapped special for the S2000 and is worth paying for. Others say the gap difference isn't worth paying for. If you haven't noticed any difference Ill probs just go to Autozone and save 40 bucks.
Hi LHT, I think my AP2 has the same idling sound as the red car in your video, would you recommend checking for valve adjustement or TCT? The car never misfires or gives me any trouble and maybe I'm just a little paranoid about the sound. My car has only 55000 miles.
Without actually hearing it I can’t really say. Usually a TCT will only make noise very low rpm while lifters are more noising around 3-4K rpms light load.
Are those rear tires on the red S2K directional? 15:37 Looks like they're installed incorrectly or rotated wrong. Oh, and it looks like u have a leaking valve cover 😄 Lol
I’ll buy a tshirt and sticker with that design John!! I just checked your store, I need a medium shirt please and also, what kind of material is it? Just wondering if it preshrunk if washed or dry fit material. Thanks!!
A friend replaced his clutch but the pedal wasn't very smooth. I was helping him replace the clutch master cylinder but it didn't help. Pulling from my LHT knowledge, I asked him if he replaced the bearing guide while he was in there. Unfortunately, he didn't. A few weeks later I got this message...
***"FYI
My clutch issue was in fact the release bearing guide
I replaced both guide and bearing, and properly lubricated with Honda grease, and my S is back to wonderful 😎
Things to remember, replace the $35 guide when replacing the clutch, and lubricate as instructed"***
I recommend LHT often.
Thanks bud. One of the reasons we include one in our complete kit
Just discovered your channel after i got my AP1. You are exactly the type of mechanic we all need, the car guys mechanic. The attention to detail is insane, it's a shame you're on the wrong coast.
best part of my evening....a nice bourbon and LHT.
Jorge, John, Ester you all are fun to watch. I'm proud of you all and your website. Keep that interesting content coming.
Thanks for watching. Glad you enjoy the content.
I got my shirt today, and a surprise license plate frame!. You guys are great!
Awesome buddy. Thanks for the support
Got my LHT trio in today. I think one of those keychains in the bag made it into my box. Thanks guys!
Thanks for the order. 👍🏻
Thanks for the always informative videos! Still patiently waiting for the shop S2000 mods! Hope you guys are safe and healthy!
I said this before and Ill say it again we need you in so cal. 😎
Hey John! I ordered one of your brake master cylinder braces and install took less than 5 mins, and now the pedal pressure feels so good! it's nice and stiff now, it used to make a little clicking sound before if I pressed too hard on it and now it's gone! Must have been flex in the firewall...great product and it looks great!
Great. Thanks for the review. Now the cars are getting old you can see how much the fire wall flexes. Thanks for the review.
Thanks for all these great informative videos. I am waiting on the parts to change my clutch master cylinder. Going to do the slave too. I don't have the maintenance history of this car and bought it as a project in the fall. So my thinking is to do it at the same time. How hard is it to get the clutch pedal off? The leak from the master cylinder has rusted the clutch pedal. So i want to take it off remove the rust and refinish it. You asked about preventing rodents in the video. I use little sonar speakers that plug into a receptacle. I have one on each side of the garage. They seem to work well. I am in Toronto Canada. So in the winter months when i am not driving my summer cars I am always worried about the car becoming a home for animals seeking refuge. Has worked so far.
love the videos and great information, cant wait to get my first s2k
Those spinners need to be saved for the right moment.
We will a limited run of them in the store real soon.
I’ll buy a shirt with that new design!
There in the store now.
When I see LHT... I click
Have you guys noticed any difference between the "Red Box" Honda NGK PFR7G-11S vs buying the NGK PFR7G-11S from the parts store?
No. Same plug.
@@LHTPerformance Billman says the Red Box is gapped special for the S2000 and is worth paying for. Others say the gap difference isn't worth paying for. If you haven't noticed any difference Ill probs just go to Autozone and save 40 bucks.
@@taylorc2542 We always gap plus before installing. Use what makes you feel right.
I'd be interested in a shirt with the new design.
There in the store.
Ah yes. Been waiting on those spinner turbine for awhile now😁
They will be some on the store in a couple of days. 👍🏻
How often do you replace slave cylinders? I would think that dark, contaminated fluid would harm those as well.
Flush the fluid regularly and they last a long time.
Is that a factory spoiler on the black S2000? I think it would look nice on my wife's 2002 ...
I don’t know. Maybe the owner will chime in.
Hi LHT, I think my AP2 has the same idling sound as the red car in your video, would you recommend checking for valve adjustement or TCT? The car never misfires or gives me any trouble and maybe I'm just a little paranoid about the sound. My car has only 55000 miles.
Without actually hearing it I can’t really say. Usually a TCT will only make noise very low rpm while lifters are more noising around 3-4K rpms light load.
@@LHTPerformance I think it's more of a lifter tick at low RPM. Is there a way that I can send you a video of it? Thank you for the response!
@@BryantSong Send it via Facebook or Instagram and I’ll take a listen
@@LHTPerformance sent thru facebook
Why don't you guys offer decals for sale?
Which spark plugs do you use for all the s2ks?
Can you do some CRZ/Insight videos?
Unfortunately our channel doesn’t provide enough to purchase cars for the channel. We film what comes in.
Are those rear tires on the red S2K directional? 15:37 Looks like they're installed incorrectly or rotated wrong. Oh, and it looks like u have a leaking valve cover 😄 Lol
I’ll buy a tshirt and sticker with that design John!! I just checked your store, I need a medium shirt please and also, what kind of material is it? Just wondering if it preshrunk if washed or dry fit material. Thanks!!
The shirts are 50/50. We wear them every day and wash them on hit with no shrink.
A nice rum and coke and LHT ;)
I was told before that rats hate the smell of peppermint oil, if you want to give that a try😉
My s2k feels like the trans shakes bad when I’m on 2/3krpm and it goes away if I push the clutch or gas can you help me lol 😐
2:00 Oof, that's ooooooold.
nice hair george, lol @ xmas tree still up and i though i was late
Lol. I know, everyday while eating lunch we say , ‘ we need to take the tree down’.
Keeping rodents away: pepermint oil is your friend :)
ruclips.net/video/bMo0s7h11AQ/видео.html
Clutch issues suck 😢