Dvmega firmware update Bluestack micro+

Поделиться
HTML-код
  • Опубликовано: 18 дек 2024

Комментарии • 5

  • @rayjackson8546
    @rayjackson8546 4 года назад

    Eric,
    Well thanks for the video and the upgrade went as expected, but the BlueDV Plus will not connect to the Bluetooth or when connected to a usb port on the computer. all I get is the 2 Red Leds flashing and no connection ... and the software gets an error and will not save data to the BlueDv. My suspicion is that the BlueDV was DOA . Any Suggestions since Gigaparts has no tech support and I had to request a manager at Gigaparts to get a return/replacement.
    Rather disappointed with the bluedv plus(unfortunately I had to wait over the 30 day to implement this new product)

  • @bubbarob1978
    @bubbarob1978 7 лет назад

    Thanks for the video. I have all the same setup but I have the single band (UHF) model DVmega. Do you know if the procedure is the same for the single band unit?

  • @rayjackson8546
    @rayjackson8546 5 лет назад

    This is great if you have the Bluestack but what about using the raspberry pi to do the upgrade. I have 2 pi s and don't really want to but another board to upgrade the 2 older dv megas. Yes buying the Bluestac (BS) just to upgrade the firmware on the dvmega is cheaper than buying a new DV mega
    Thanks
    ND9W

  • @africantwin173
    @africantwin173 7 лет назад

    nice vid on how to update firmware with bluestack. Now show us how to do it without the 40 euro bluestack. I like running PI-Star image.

  • @mavgk6155
    @mavgk6155 6 лет назад

    Radiogeeks show a different pin