Hooray! I got the battery off! It took me over an hour to do it neatly. I put plastic slices underneath, which I made from a transparent water bottle, and slowly peeled them off with a flat screwdriver. When I put it back together, I'll glue it on with factory glue through tape, sticking out a small tab so that next time I can peel off the battery without any problems. I installed a hot swap board for switches.
Thank you very much! Your guide helped me a lot while disassemblying mine, and after almost three hours of work (there were a few side quests...) it works!!!! Thanks a lot, indeed!
For thouse who can't remove the battery: you can *very gently* carve out piece of plastic just above the green PCB with something like box cutter, and then *carefully* shove the same box cutter underneath.
I would disassemble the mouse and then clean everything early, if it's not working, yet then you have to clean the sensor. If that doesn't work either, then you need to replace this unit: che.grandado.com/products/reparatur-teile-maus-rad-button-board-fur-logitech-g900-g903-maus-roller-bord?variant=UHJvZHVjdFZhcmlhbnQ6MjgzMTUyNzI5&gclid=CjwKCAiA2rOeBhAsEiwA2Pl7Q6sNMolMADTfCyjwaoXnwjpZBB4IqkcskqWI_U_rzX987-Cdino1OxoCFJAQAvD_BwE
@@jugoslavs Thanks for responding to my message, I will try that. I send a message to logitech if they want to send me a replacement or repair it. I got a automated respond saying they will replace out of curtosy. But it was an automated message and then they redirected me to a logitech employee. He has not responded yet. We will see what happens. If they dont replace it, ill try spraying some wd40 on the wheel :/
yes of course here is the link: de.aliexpress.com/item/1005003335158960.html?spm=a2g0o.productlist.main.17.7a39d429WFTTSv&algo_pvid=761716f4-11c4-4668-97f0-d05fd33cd308&algo_exp_id=761716f4-11c4-4668-97f0-d05fd33cd308-8&pdp_ext_f=%7B%22sku_id%22%3A%2212000025276434992%22%7D&pdp_npi=2%40dis%21CHF%216.4%214.03%21%21%21%21%21%40211bf0a916737931250997337d0750%2112000025276434992%21sea&curPageLogUid=peT8tWyyA2Mc
микрики говно на этой мышке, Logitech тут обосрались по полной, двойной клик и не способность удерживать зажатие это бич этой модели, не ожидал такого от топового продукта. Перепаял на японские d2f-01f OMRON и о чудо, мышка стала работать идеально, так как должна была работать из коробки, не так ли Logitech ?! отдельное спасибо инженерам Logitech за намертво приклеенный аккумулятор, отдирать его из пластиковой ячейки доставило огромное удовольствие, надеюсь для вас там отдельный котел в аду приготовлен.
Hooray! I got the battery off! It took me over an hour to do it neatly. I put plastic slices underneath, which I made from a transparent water bottle, and slowly peeled them off with a flat screwdriver. When I put it back together, I'll glue it on with factory glue through tape, sticking out a small tab so that next time I can peel off the battery without any problems.
I installed a hot swap board for switches.
Thank you very much! Your guide helped me a lot while disassemblying mine, and after almost three hours of work (there were a few side quests...) it works!!!! Thanks a lot, indeed!
👍👍👍👌👌👌
For thouse who can't remove the battery: you can *very gently* carve out piece of plastic just above the green PCB with something like box cutter, and then *carefully* shove the same box cutter underneath.
👍👍👍
thank you so much! i just restored my G903 using your video! 🙏
I`am glad that the instructions helped you👍👍👍👍
great video
Thank you very much..
hi sir jugi may I know what g903 Switcher did you used? my left click is not functioning also.
I just updated the link..
thank you for the help! 😄
I'm glad that the instructions helped you👍👍👍
My mouse scroll is not working, it does when i press the mouse button 3 in and then scroll. 2 years and 2 months, just outside warranty :/
I would disassemble the mouse and then clean everything early, if it's not working, yet then you have to clean the sensor. If that doesn't work either, then you need to replace this unit:
che.grandado.com/products/reparatur-teile-maus-rad-button-board-fur-logitech-g900-g903-maus-roller-bord?variant=UHJvZHVjdFZhcmlhbnQ6MjgzMTUyNzI5&gclid=CjwKCAiA2rOeBhAsEiwA2Pl7Q6sNMolMADTfCyjwaoXnwjpZBB4IqkcskqWI_U_rzX987-Cdino1OxoCFJAQAvD_BwE
@@jugoslavs Thanks for responding to my message, I will try that. I send a message to logitech if they want to send me a replacement or repair it. I got a automated respond saying they will replace out of curtosy. But it was an automated message and then they redirected me to a logitech employee. He has not responded yet. We will see what happens. If they dont replace it, ill try spraying some wd40 on the wheel :/
@@-FyX- hi i have the same issue now, what happend to you :) ?
can you update the link for the switches?
yes of course here is the link:
de.aliexpress.com/item/1005003335158960.html?spm=a2g0o.productlist.main.17.7a39d429WFTTSv&algo_pvid=761716f4-11c4-4668-97f0-d05fd33cd308&algo_exp_id=761716f4-11c4-4668-97f0-d05fd33cd308-8&pdp_ext_f=%7B%22sku_id%22%3A%2212000025276434992%22%7D&pdp_npi=2%40dis%21CHF%216.4%214.03%21%21%21%21%21%40211bf0a916737931250997337d0750%2112000025276434992%21sea&curPageLogUid=peT8tWyyA2Mc
микрики говно на этой мышке, Logitech тут обосрались по полной, двойной клик и не способность удерживать зажатие это бич этой модели, не ожидал такого от топового продукта.
Перепаял на японские d2f-01f OMRON и о чудо, мышка стала работать идеально, так как должна была работать из коробки, не так ли Logitech ?! отдельное спасибо инженерам Logitech за намертво приклеенный аккумулятор, отдирать его из пластиковой ячейки доставило огромное удовольствие, надеюсь для вас там отдельный котел в аду приготовлен.
Да, это действительно безумие, какую чушь придумывают инженеры.😪😪😪😪
Эта батарея, это просто ужас. Извините, даже времени нет на английский переводить. Уже целый час потратил чтобы хоть какую-то часть отклеить.
can you update the link for the switches? thx
I just updated the link..