Great video Scott. On my MX Master, my scroll wheel button is command W. My button below the scroll wheel is command T. My scroll wheel on the left side of the mouse is volume up and down. My bottom button on the left of the mouse is delete. My top button on the left of the mouse is enter. The large button on the left of the mouse that you press in completely with your hand is just “back” in whatever app I’m using. I’ve found this setup works really well in general efficiency.
I not only bought the mouse, but used this as a mapping guide. i ended up going with trim front and back for the 2 buttons and the thump rest in conjunction with the wheel for zoom in and out, but may play with it more, never used the command editor and been doing editing for 3 years now, just a small timer however, cheers for the instructions.
You forgot to mention the battery life on this ia absolutely awesome! I got my MxMaster2S a couple of weeks ago and have had to charge it once so far. :)
I can attest to the fact that this is a wonderful device. I took delivery of an MX3 a few days ago and it dramatically changes editing in Fcpx. Should have bought one ages ago. 10/10.
I was researching for a video/photo editing mouse for my new laptop and found this video. So helpful and being able to customize buttons on per software basis is a game changer!!
I ordered one of these about two hours before you put this video up. because of the same reasons, i was sick of going backwards & forwards. Can't wait till tomorrow when it comes
From one Sc ot to another...PHENOMENAL video. I am sold. Thanks so much. I currently have the Logitech MX mouse, which is a little scaled down from yours, but I think I will go to my Local Best Buy so I can touch it and feel it to see if it will suit my hand size and tactile feel, etc. Thanks again.
You can make all those shortcuts on the keyboard, just change them so that they are all about your left hand. I can give you my config if you want. I came here because I wanted to know if I can scroll and zoom the timeline with the mouse, and you didn‘t say a word about that...with the trackpad I can zoom and scroll the timeline perfectly
@@seanc.5310 Only thing is the flow and a little longer battery life, higher dpi (which does not really matter for work). It makes sense better now that the price came down as well
Really awesome information - much appreciated - I am learning FCP through udemy at moment and instructor mentioned that a right click mouse would be recommended.
Looks like a great product. I won't spend the money on it now, but if I decide to start picking up more jobs for people I will probably invest in it. Scott, can you throw a link down to the video you referenced about the shortcut mentioned regarding trim to start/end? I couldn't find it in a quick look at your videos.
Okay okay okay, we're taking credit for the creation of this video! :) Left a comment on kit.com (if you all aren't on kit.com with your kits you need to do it -- now!) about how you set up this mouse, etc. and BAM! Here's a video on it almost the next day! Love it, love your videos, keep 'em coming!
I just got one of these after seeing this video, but logitech options does not recognise final cut, ever single other app on my mac is recognised but final cut is blanked out.
Thank you for the review, I bought the Mx Master based on your suggestion and I'm very satisfied with it. Then only problem I have is that the logitech app doesn't let me customize the moouse with the "bracket" option.
It lets you customize any key command you want on the mouse. Just route bracket key to mouse button and then make sure in fcpx that you have the bracket button routed to what you want it to do.
I just got one of these after seeing this video, but logitech options does not recognise final cut, ever single other app on my mac is recognised but final cut is blanked out. Very disappointed.
This keyboard is nice! I have the same keyboard, but it's very useful for video editing. Thank you for the very easy-to-understand video. With love from Japan :)
“Buhh-ens” hahaha but seriously thank you for all that you do and how much you help fellow filmmakers!! I know if I ever come across an issue or a problem you’ve more than likely covered it in a video and it’s always so much help!! Thank you!!!!
Hey Scott great as always. I just have small note if you can make your Vloging videos shorter that would be perfect and will bring more viewers! Thank you and please don’t get any offend
Sorry, that's not a huge concern to me. My most viewed video on my channel is an hour long, so my content is more important to me. Time isn't an issue, neither are views. Thanks for watching.
Y’know Scott, I see the potential value of that mouse, so I bought one last week. Worked fine, but as soon as I downloaded the LT Options sw to my Mac, it started sporadically connecting & disconnecting, making it unusable. I have a 15” MBP with the latest High Sierra. I returned it & got a Magic Trackpad. I like the way you have it set up, though.
Thank you Scotty!! Bought it today and will be setting it up as you suggested. I don’t edit multiple timelines simultaneously however. What would you suggest I set up those little buttons to do by the horizontal scroll wheel as an alternative instead of going to other timelines?
Hi Scott thanks so much for this video. I just wanted to check if you are facing any scroll issues when you lift the mouse from the pad. I'm planning to buy this mouse but I've read a lot of forums which talk about issues with scrolling when the mouse is lifted up. Also the switching between ratchet scrolling mode and smooth scrolling is not that great apparently. Have you noticed any such issues with your mouse?
I can only set the basic controls with my MX Master 2S, logi options is up to date and I can see C1 and AF but no advanced settings are available (ie. brush size, advanced modifiers). Any tips on how to fix this?
I purchased the mouse after this video but I have a problem. I created a similar profile to yours on my mouse under the final cut application. As well as customised and saved my revised keyboard commands. However the mouse is not controlling final cut with the new commands, but is using the default commands. Perhaps its a logitech issue.
I have this mouse and dig it, my question is can I set it up for the different sections in resolve 17(cut page,edit,color grading,etc..) thanks in advance
When trying to assign keystroke assignments to the MX Master 2S, has anyone else had problems with security and privacy of the app? When I allow this to my Macbook, the keystroke assignment I want for that button does not work (or wont assign it). Know idea on how to fix this, awaiting a reply back from Logitech help desk via email...I am doing it step by step as per video but there is no mention of the security and privacy part that I'm encountering.
OK, so I am now using the mouse you recommended and LOVE IT!!!! My only question is this Scotty: I don’t usually edit in multiple timelines at the same time, so those two buttons for back and forward (you use it enter) aren’t useful the way it is currently. I have them set to up arrow and down arrow to go ahead or back clip by clip. Any other ideas for what they can be useful for? Also, I have to again thank you for one other tip you gave in this video that was extremely helpful: to enable the “Enter” button to go to the beginning. That is so useful for both when you are going through clips in the browser, when you want to quickly go to the beginning of the clip you are reviewing and also in the timeline. Do you know of any FCP X shortcut to go to the playhead wherever it may be on the timeline. I am finding that i get the playhead lost too often and have to zoom out a lot to find it. Thanks again. Your videos are truly amazingly helpful.
Scott McKenna Agree. I shot a wedding video for a dear freind’s daughter a few months ago, and am seriously considering pursuing that as a side line. I have watched some of your excellent videos on this, and would be so grateful if you would point me in the right direction, as far as online training sites go for this. Also, how to start such a business. Any help would be appreciated Scott.
althought the mouse wont me bind only the command or option key. it wants me to press a combination with them and not to bind them alone, anyone else know how to do this? thanks
Thanks for the video. I am a PC user and just ordered the m1x MacBook pro. I have a vertical mouse that I love, but will I lose any functions of a typical mac mouse by using my pc vertical mouse? Is the magic mouse just some bs name, or does it have additional functions, lol. #20 year pc user going to apple, lol
Do you have any issues with the side scroll wheel? Mine seems to be intermitent when scrolling my timeline. Sometimes works great, sometimes won't scroll at all even though the timeline is selected
@@scottmckenna thanks so much...I was curious about the OS requirement for the MX Master 3 and I asked logitech and they responded: "Logitech Options is not compatible with Apple silicon ARM M1 / M1 Pro / M1 Max and is compatible with Apple Intel-based computers."...ah? does this mean that if I get the MX master 3 the logitech options software will not install on my new m1pro and I won't be able to use the advanced features? the mouse will work but just the basic functions? what? I have a couple of older macs one running 10.13.5 and an old one 10.9.5 and I'm considering getting the original MX which doesn't require OS 10.15 but I wonder if it would work on the M1pro...hmm... I haven't seen anyone saying anything about the logitech options NOT being compatible with the M1pro..why would logitech say that? thanks
What is buhin? 🤣 Just kidding. I was looking at the upcoming Master 3 but it sounds like I'll be waiting for a few weeks before the distributors have it. So now I'm looking at this S2 and I'm wondering if there are any really significant differences worth the wait or if I should just go and buy the S2. If the differences are significant I will wait for the 3. And one last thing, do these features work with all video editing software or is it specifically geared to Final Cut? FYI I'll be using Windows if that makes a difference
Unfortunately, Logitech has an issue with their software on Mac. It interferes somehow and causes the cursor to skip once in a while. I've researched and did enough troubleshooting to find the solution was to uninstall the Logitech software. So then it just becomes a regular mouse... which, ergonomically is nice, but I would prefer the ability to use it as intended. This was never an issue on my PC.
If you need advice on your audio for these videos, DM me. Great work, just giving constructive criticism. Time to bring you audio game up to par with your video.
I had trouble with this too. This is how I did it in Logitech Options version 7.12.82: Make sure you have selected Final Cut from the applications list in the upper right corner of the Logitech Options window and Mouse on the upper left corner. Click the green circle over the button you want to assign a keystroke. A menu opens. Scroll down to Keystroke assignment. A side window opens. Click it once with the left mouse button. Press the keystroke you want to assign to your mouse button. Move your mouse out of the menu to a clear area in the Options window and click once to close the Menu. Check to see if it worked by hovering your mouse over the button you assigned. The words "Keystroke assignment :" and whatever you assigned (Cmd + B, for example) should appear. If it says, "Keystroke assignment : None", it didn't work. Try again. I had to fumble around a few times till it worked. Then I had to learn how to make a custom Command Set for FCPX keyboard shortcuts. I followed a combination of Apple's online support page, "Final Cut Pro X: Modify keyboard shortcuts in the Command Editor" and Scott Kenna's video for the specifics of his setup.
Great video, I am trying to pair the mouse with Logitech options and am struggling. I can pair it outside of the software just in Bluetooth settings but not through Logitech options. This means when I am in the software it shows no mouse is connected. Do you know why this is happening? Thanks!
I don’t think it is the mouse because I have tried 3 of them! I also called Logitech and they said they were going to get back to me but they never did. They had horrible customer service.
@@scottmckenna Well, she has a small hand and I am concerned that she might not feel comfortable with it. I dont mind the price of the mice, I just want the best there is for small hand people.
I have smaller hands too and was ready to return the MxMaster...but I hated the thought of giving up all those buttons! I bought a 'mouse' bean bag to put under my wrist and now I can reach all the button action pretty easily. Big mouse. @@LordOfThunderUK
I noticed the same buh-in issue. I honestly think many people pronounce it that way...I LOVED his video and actually bought the product because of it. Today, I set it up for FCP, PS, LR, etc.
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
That whole trim start and trim end is life-changing! It's going to save me so much time!
Heck yea.
Great video Scott. On my MX Master, my scroll wheel button is command W. My button below the scroll wheel is command T. My scroll wheel on the left side of the mouse is volume up and down. My bottom button on the left of the mouse is delete. My top button on the left of the mouse is enter. The large button on the left of the mouse that you press in completely with your hand is just “back” in whatever app I’m using. I’ve found this setup works really well in general efficiency.
I not only bought the mouse, but used this as a mapping guide. i ended up going with trim front and back for the 2 buttons and the thump rest in conjunction with the wheel for zoom in and out, but may play with it more, never used the command editor and been doing editing for 3 years now, just a small timer however, cheers for the instructions.
Have been using the trackpad until now. Only just bought the MX Master, but so far it’s saved me a heap of time! Thank you.
It's the best
You forgot to mention the battery life on this ia absolutely awesome! I got my MxMaster2S a couple of weeks ago and have had to charge it once so far. :)
Truth.
I couldn't live without my MX Master and my 27" 5k iMac. I have an MX Anywhere Mouse 2 that I use when traveling with my MacBook Pro.
I can attest to the fact that this is a wonderful device. I took delivery of an MX3 a few days ago and it dramatically changes editing in Fcpx. Should have bought one ages ago. 10/10.
Agreed.
Dude your button setup is _exactly_ what I would have chosen for FCPX! Can't wait to get my mouse & retire the "Magic" Mouse. 👍🕹️
Awesome. You’re going to love it. I’m obsessed with the mouse. It helps the workflow so much better.
I'm a convert to the MX Master as well! Probably will be buying the 2S in the next few months.
Such a great mouse.
Great video, I love how you show us the way you set it up!
Glad it was enjoyable.
I was researching for a video/photo editing mouse for my new laptop and found this video. So helpful and being able to customize buttons on per software basis is a game changer!!
It's the best mouse ever.
Got mine today and have just finished customising. Bought purely based on your review and the fact I trust your judgement. You were right!
You'll love it.
I ordered one of these about two hours before you put this video up. because of the same reasons, i was sick of going backwards & forwards.
Can't wait till tomorrow when it comes
Awesome. Let me know what you think.
I will do Scott. I was just sick of the Apple magic mouse lol
Me too. It's the least magic thing ever.
Scott McKenna ha ha very true my friend
Hi, how do enable the mouse to zoom in and out on the timeline by using the scroll wheel? Thanks
Looks super convenient. Tempting
From one Sc ot to another...PHENOMENAL video. I am sold. Thanks so much. I currently have the Logitech MX mouse, which is a little scaled down from yours, but I think I will go to my Local Best Buy so I can touch it and feel it to see if it will suit my hand size and tactile feel, etc. Thanks again.
Finally picked one up, and you were right: game changer. Thanks for introducing me to this
The best.
Thanks! This was really helpful!
So stoked to edit in FCPX with this and see such a productivity boost!
Such an efficient, well designed program.
Thanks, mate! I bought this mouse because of this video and I couldn't be happier. Cheers from Brazil!
Awesome. It’s a great mouse.
phenomenal video. I just got this mouse and the keyboard for Christmas and was a little lost on how to make it all work. Thanks.
I’m late to the party but I use an apple mouse and ordered the mx master 3s a few days ago so waiting to try it out
i am japanese video editor. very impressed. thank you teaching.
Awesome.
Love what I've seen of this mouse. Tired of my magic mouse.
Yes it’s an awesome mouse.
You can make all those shortcuts on the keyboard, just change them so that they are all about your left hand. I can give you my config if you want.
I came here because I wanted to know if I can scroll and zoom the timeline with the mouse, and you didn‘t say a word about that...with the trackpad I can zoom and scroll the timeline perfectly
James! Did you find how to zoom in and out the timeline with the mouse?
@@mlhoudelot keep ctrl pressed and scroll
Love my OG MX Master. Trying to find an excuse to upgrade.
Don’t need an excuse. Buy it lol
Sean Marsalis 👍👍👍
I hear ya man. I see no reason either, couldn't be happier with mine.
@@seanc.5310 Only thing is the flow and a little longer battery life, higher dpi (which does not really matter for work). It makes sense better now that the price came down as well
Really awesome information - much appreciated - I am learning FCP through udemy at moment and instructor mentioned that a right click mouse would be recommended.
great video. super helpful. thanks so much
Great video. much appreciated. just ordered mine. can't wait. Thanks!
You are a Wizard Harry!
Awesome! I think this will speed up my editing A LOT!!! I've been using a mouse keyboard and track pad. 😂
Same!
I do a lot of similar things as you but I use my Wacom Intuos tablet. Haven't used a mouse in years.
Yup, some nice options in those as well. I just never got used to using one of those things because I was never into that type of work.
If you do more photography I think it's a must have tool.
what's the difference between the mx master 2s and the mx master 3? Why does the mx master 3 cost more?
MX3 is USB-C and charge much faster, better wheel, version specific for Mac but I saw a ton of people complain regarding lag issues, scroll etc.
Great video on this mouse Scott, very thorough, and quite a testimonial from someone with your credentials. I'm going to buy it, thank you.
Glad you found it helpful. I buy it for every new employee I get. It’s amazing.
Looks like a great product. I won't spend the money on it now, but if I decide to start picking up more jobs for people I will probably invest in it. Scott, can you throw a link down to the video you referenced about the shortcut mentioned regarding trim to start/end? I couldn't find it in a quick look at your videos.
ruclips.net/video/UkPCoegMwXE/видео.html
Yes! Just ordered this mouse!
Thanks Scott... I just ordered the MX 3
Nice
Another great one bud! Have been thinking about buying one, I think you’ve pushed me to the purchase hahaha
Do it.
So so good
any way to use the scroll wheel on the mouse without holding shift to scroll the timeline? so dumb you have to hold shift to use the scroll wheel
Okay okay okay, we're taking credit for the creation of this video! :) Left a comment on kit.com (if you all aren't on kit.com with your kits you need to do it -- now!) about how you set up this mouse, etc. and BAM! Here's a video on it almost the next day! Love it, love your videos, keep 'em coming!
you're welcome.
I don't see Final Cut Pro x in the application settings for mx master 3 I need BIG HELP!
I just got one of these after seeing this video, but logitech options does not recognise final cut, ever single other app on my mac is recognised but final cut is blanked out.
Did this issue ever get solved??
Awesome video on how to program the MxMaster, thank you.
Glad it was helpful
Thank you for the review, I bought the Mx Master based on your suggestion and I'm very satisfied with it.
Then only problem I have is that the logitech app doesn't let me customize the moouse with the "bracket" option.
It lets you customize any key command you want on the mouse. Just route bracket key to mouse button and then make sure in fcpx that you have the bracket button routed to what you want it to do.
Thank you, I finally managed to assign the bracket as you designed it.
I just got one of these after seeing this video, but logitech options does not recognise final cut, ever single other app on my mac is recognised but final cut is blanked out. Very disappointed.
Super useful video! Thank you 🙏🏼
Great Helpful Vid !
This is super useful!
Best mouse ever.
@@scottmckenna I’m sold after your video. Just ordered the MX Master 3 (its my first logitech mouse) 🤩thanks brother!
This keyboard is nice! I have the same keyboard, but it's very useful for video editing. Thank you for the very easy-to-understand video. With love from Japan :)
Are you going to do an update with the model 3s?
“Buhh-ens” hahaha but seriously thank you for all that you do and how much you help fellow filmmakers!! I know if I ever come across an issue or a problem you’ve more than likely covered it in a video and it’s always so much help!! Thank you!!!!
Glad I can help.
You called it my friend. TY!
Glad it helped.
before learning fcpx im trying to get all right tools for it...👍 like in every over job
This is great thanks
hahaha this is going to be a great upgrade for my work flow thank very good video
Great video! Just fyi, I don't know if it's just me, but your affiliate link isn't working for amzn. Would've loved to support!
you can export settings, could you export yours?
Love my mix mouse. Another awesome video.
Glad you liked it. Thanks.
Hey Scott great as always.
I just have small note if you can make your Vloging videos shorter that would be perfect and will bring more viewers!
Thank you and please don’t get any offend
Sorry, that's not a huge concern to me. My most viewed video on my channel is an hour long, so my content is more important to me. Time isn't an issue, neither are views. Thanks for watching.
SO HELPFUL !!
That was super techie and informative!
Nice
wow amazing tips
Very Helpful thank You !!
Y’know Scott, I see the potential value of that mouse, so I bought one last week. Worked fine, but as soon as I downloaded the LT Options sw to my Mac, it started sporadically connecting & disconnecting, making it unusable. I have a 15” MBP with the latest High Sierra. I returned it & got a Magic Trackpad. I like the way you have it set up, though.
Interesting. Sorry to hear you had issues. It's been great for me.
Thanks for the video! How did you program text shortcuts? All I can find is pre-programmed options in my MX 3
Thank you Scotty!! Bought it today and will be setting it up as you suggested. I don’t edit multiple timelines simultaneously however. What would you suggest I set up those little buttons to do by the horizontal scroll wheel as an alternative instead of going to other timelines?
is it really Master 2S or Master 3 mouse? can 2S really be set up for Final Cut needs? people said it works only with master 3...
OMG I need one of these!
Yes you do.
Zoom in zoom out the timeline. Can I do with the scroll wheel Mx master Logitech mouse ?
That is exactly what I'm trying to do... ANYONE?
Hi Scott thanks so much for this video. I just wanted to check if you are facing any scroll issues when you lift the mouse from the pad. I'm planning to buy this mouse but I've read a lot of forums which talk about issues with scrolling when the mouse is lifted up. Also the switching between ratchet scrolling mode and smooth scrolling is not that great apparently. Have you noticed any such issues with your mouse?
Really good and helpful video
does it have a third middle mouse button (DaVinci Resolve requires)
I can only set the basic controls with my MX Master 2S, logi options is up to date and I can see C1 and AF but no advanced settings are available (ie. brush size, advanced modifiers). Any tips on how to fix this?
I purchased the mouse after this video but I have a problem. I created a similar profile to yours on my mouse under the final cut application. As well as customised and saved my revised keyboard commands. However the mouse is not controlling final cut with the new commands, but is using the default commands. Perhaps its a logitech issue.
Say you’re zoomed in on your timeline and you want to go from the front to the back how do you scroll horizontally? I definitely see the value.
The thumbwheel inside your thumb scrolls left to the right. The scroll wheel on the top goes up and down.
Alright Scott....you've convinced me lol.
How is the horizontal scroll wheel? I heard it’s not a responsive. I would love to be able to quickly horizontal scroll through my timelines
Works great for me.
I have this mouse and dig it, my question is can I set it up for the different sections in resolve 17(cut page,edit,color grading,etc..) thanks in advance
Only if they let you route keyboard shortcuts for those screens. If they do, than yes.
Nice informative video i like
Glad to hear.
When trying to assign keystroke assignments to the MX Master 2S, has anyone else had problems with security and privacy of the app? When I allow this to my Macbook, the keystroke assignment I want for that button does not work (or wont assign it). Know idea on how to fix this, awaiting a reply back from Logitech help desk via email...I am doing it step by step as per video but there is no mention of the security and privacy part that I'm encountering.
OK, so I am now using the mouse you recommended and LOVE IT!!!! My only question is this Scotty: I don’t usually edit in multiple timelines at the same time, so those two buttons for back and forward (you use it enter) aren’t useful the way it is currently. I have them set to up arrow and down arrow to go ahead or back clip by clip. Any other ideas for what they can be useful for? Also, I have to again thank you for one other tip you gave in this video that was extremely helpful: to enable the “Enter” button to go to the beginning. That is so useful for both when you are going through clips in the browser, when you want to quickly go to the beginning of the clip you are reviewing and also in the timeline. Do you know of any FCP X shortcut to go to the playhead wherever it may be on the timeline. I am finding that i get the playhead lost too often and have to zoom out a lot to find it. Thanks again. Your videos are truly amazingly helpful.
It’s all about customization so whatever you prefer.
Scott McKenna Agree. I shot a wedding video for a dear freind’s daughter a few months ago, and am seriously considering pursuing that as a side line. I have watched some of your excellent videos on this, and would be so grateful if you would point me in the right direction, as far as online training sites go for this. Also, how to start such a business. Any help would be appreciated Scott.
Hey! hows the mouse been over the years? Still worth it?
Solid
althought the mouse wont me bind only the command or option key. it wants me to press a combination with them and not to bind them alone, anyone else know how to do this? thanks
Thanks for the video. I am a PC user and just ordered the m1x MacBook pro. I have a vertical mouse that I love, but will I lose any functions of a typical mac mouse by using my pc vertical mouse? Is the magic mouse just some bs name, or does it have additional functions, lol.
#20 year pc user going to apple, lol
The magic mouse is as far from magic as possible. It doesn't even come close to this mouse
Do you have any issues with the side scroll wheel? Mine seems to be intermitent when scrolling my timeline. Sometimes works great, sometimes won't scroll at all even though the timeline is selected
Nope. Mine has worked great so far.
will the MX Master 3 for mac be a massive improvement over the original MX version? I want a new mouse to use with my 16" M1pro MBP...thanks so much!
I have both now. The 3 isn’t a huge improvement over the 2s. It’s layed out a little different but that’s about it. Feels nice though.
@@scottmckenna hmm...I'll go take a look at both at Best Buy...thanks so much
@@scottmckenna thanks so much...I was curious about the OS requirement for the MX Master 3 and I asked logitech and they responded: "Logitech Options is not compatible with Apple silicon ARM M1 / M1 Pro / M1 Max and is compatible with Apple Intel-based computers."...ah? does this mean that if I get the MX master 3 the logitech options software will not install on my new m1pro and I won't be able to use the advanced features? the mouse will work but just the basic functions? what? I have a couple of older macs one running 10.13.5 and an old one 10.9.5 and I'm considering getting the original MX which doesn't require OS 10.15 but I wonder if it would work on the M1pro...hmm...
I haven't seen anyone saying anything about the logitech options NOT being compatible with the M1pro..why would logitech say that? thanks
What is buhin? 🤣 Just kidding. I was looking at the upcoming Master 3 but it sounds like I'll be waiting for a few weeks before the distributors have it. So now I'm looking at this S2 and I'm wondering if there are any really significant differences worth the wait or if I should just go and buy the S2. If the differences are significant I will wait for the 3. And one last thing, do these features work with all video editing software or is it specifically geared to Final Cut? FYI I'll be using Windows if that makes a difference
Unfortunately, Logitech has an issue with their software on Mac. It interferes somehow and causes the cursor to skip once in a while. I've researched and did enough troubleshooting to find the solution was to uninstall the Logitech software. So then it just becomes a regular mouse... which, ergonomically is nice, but I would prefer the ability to use it as intended. This was never an issue on my PC.
Hopefully this will work...
ruclips.net/video/bUBJa1xp3ZA/видео.html
This mouse’s customization works for premiere pro on Mac rightt?
Yes. Any app
Doesn't this mouse have gesture functionality? Why no mention?
No
I am having a heck of a time getting this to connect to my mbp 2016. Any thoughts?
Really? I have a 2016 and it works great. Make sure you’re following the instruction correctly.
If you need advice on your audio for these videos, DM me. Great work, just giving constructive criticism. Time to bring you audio game up to par with your video.
I know this sounds like a stupid question but does this come in white. I get mad if the colors are differnt from my Mac and my mouse
I think so.
Hi Scott,
i have troubles in KEYSTROKE ASSIGNMENT to put key combinations like CMD + b to use in FCP X.
Can you help me?
thanks
I had trouble with this too. This is how I did it in Logitech Options version 7.12.82: Make sure you have selected Final Cut from the applications list in the upper right corner of the Logitech Options window and Mouse on the upper left corner.
Click the green circle over the button you want to assign a keystroke. A menu opens.
Scroll down to Keystroke assignment. A side window opens.
Click it once with the left mouse button.
Press the keystroke you want to assign to your mouse button.
Move your mouse out of the menu to a clear area in the Options window and click once to close the Menu.
Check to see if it worked by hovering your mouse over the button you assigned. The words "Keystroke assignment :" and whatever you assigned (Cmd + B, for example) should appear. If it says, "Keystroke assignment : None", it didn't work. Try again. I had to fumble around a few times till it worked.
Then I had to learn how to make a custom Command Set for FCPX keyboard shortcuts. I followed a combination of Apple's online support page, "Final Cut Pro X: Modify keyboard shortcuts in the Command Editor" and Scott Kenna's video for the specifics of his setup.
Thank you, Sheila. The settings I've been trying to program have not been holding. I'm about to try your suggestions. @@sheilamcduffie4985
Does the mouse work on vegas pro?
Damn you! I bought one and its sitting next to my magic trackpad 2...
Throw away the trackpad lol :).
Great video,
I am trying to pair the mouse with Logitech options and am struggling. I can pair it outside of the software just in Bluetooth settings but not through Logitech options. This means when I am in the software it shows no mouse is connected. Do you know why this is happening?
Thanks!
Sorry, can't help with that issue. Reach out to Logitech. Sounds like the mouse itself is acting up.
I don’t think it is the mouse because I have tried 3 of them! I also called Logitech and they said they were going to get back to me but they never did. They had horrible customer service.
Hmm..that doesn't sound right. Might be some sort of computer issue then. I know a bunch of people that have this mouse and have not had any issues.
Is that monitor the one sold by Apple? Amazon says its 22 inch?
Yes
@@scottmckenna Thanks.
Drinking game...Take a shot every time he says "button(s)"
Great vid btw
Thanks.
*Buh-en
Hi, my wife is smaller than me (I am roughly your size) and has shorter hands, so, is there a similar version for smaller hands???
It's not that big.
@@scottmckenna Well, she has a small hand and I am concerned that she might not feel comfortable with it. I dont mind the price of the mice, I just want the best there is for small hand people.
I have smaller hands too and was ready to return the MxMaster...but I hated the thought of giving up all those buttons! I bought a 'mouse' bean bag to put under my wrist and now I can reach all the button action pretty easily. Big mouse. @@LordOfThunderUK
genius.
Buh-In (button)...i love it. Not trolling, just thought it was funny!
I noticed the same buh-in issue. I honestly think many people pronounce it that way...I LOVED his video and actually bought the product because of it. Today, I set it up for FCP, PS, LR, etc.
Paindoctor funny.... I am an anesthesiologist changing career into digital media production. Are we both running away from the same thing? LoL!