Thanks for mentioning lining up the two arrows, which was the issue with my son's Dymo. It was about two seconds from being chucked into the trash, so thanks.
Thank you, thank you, thank you. I didn’t have issues for years. Then suddenly I did. Those little hatch marks lining up was the perfect tip that I needed . Mine were quite off. I also didn’t know to hold the tape as it went in. Evidently I lost that skill over the years. Lol I wish I’d have watched your video before I ordered a new Dymo Label Maker. Oh well, now I have two, and I don’t feel so stupid now . Thanks so much!!
Super good. Are last tape was jammed from running out and getting stuck We had to overcome removing that, and then figuring out how to get the next one in, so thank you thank you
Here is a quick rundown: 1.: open the lid on the back of the device 2.: Toss it into the trash, where it belongs This is the worst labeler thing on the market since ever. The video is nice btw
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great ruclips.net/user/postUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
For me it doesn’t help. The arrows are lined up but the tape gets into it with the need to push it and then it’s not pulling the tape through naturally like it used to .
mines not even clicking therefore no loading. it's a piece of plastic with plastic stuck inside and clogging it i think. no way to clean it out either, for a machine so seemingly simple. one star.
Yeah I can’t say it’s well made. I have unclogged them before by sliding the two dials back and forth till you can find the jam and then fishing it out with a needle. Good luck!
This thing is absolutely useless. I have pressed this trigger handle til my wrist hurts, it will not make a letter show on the tape and it will not cut the tape. I’ve wasted my money on this piece of plastic that does not do what it says it will do and I am very disappointed
Thank you. I can't believe there's NOTHING from this company packed with the product or even on their web site. Ridiculous. This helped. Thanks.
You’re welcome. Glad I could help.
Thank you so much. All I needed was the one little trick,that you supplied, hold the tape and click till the tape grabs and is ready to print.
Awesome! I’m glad I could help!
Thanks for mentioning lining up the two arrows, which was the issue with my son's Dymo. It was about two seconds from being chucked into the trash, so thanks.
You’re welcome. Glad I could help.
That's exactly how I got my label maker 😂
Thank you so much! I found this is my desk and tried to fix it, this video was so simple and easy to follow, I loved it.
@claires23 glad you found it helpful!
Thank you, thank you, thank you. I didn’t have issues for years. Then suddenly I did. Those little hatch marks lining up was the perfect tip that I needed . Mine were quite off.
I also didn’t know to hold the tape as it went in. Evidently I lost that skill over the years. Lol
I wish I’d have watched your video before I ordered a new Dymo Label Maker.
Oh well, now I have two, and I don’t feel so stupid now .
Thanks so much!!
Glad I could help!
Thanks! This is exactly what I needed. I was having so much trouble getting the new label tape to actually feed into the machine.
You’re welcome. I’m glad you found it helpful.
heck yaa dude 45 second tutorial. thank you forreal!!
You’re welcome! If it’s quick and easy you gotta keep the tutorial quick and easy haha.
Quick easy and straight to the point! Helped me so much!
Awesome! Glad to help
I was about the throw my label maker, am glad I wanted your video and fixed the hatch marks. Thanks
@jaskaur9530 Glad I could help!
Thank you!!!!!🙏 Couldn’t find anything on their website so this was very helpful 😊
@artbyhannamelin Glad I could help!
You know, it really is the small things that make a big difference. Thank you!
I do what I can!
Super good. Are last tape was jammed from running out and getting stuck
We had to overcome removing that, and then figuring out how to get the next one in, so thank you thank you
You’re welcome! Glad I could help!
Thanks so much - didn't know I had to click and then close. Much appreciated!
You’re welcome!
I was about to throw out the whole thing lol thanks for this video you are a saint
This was very helpful. Thank you so much!
You’re welcome! Glad I could help!
Perfect! Exactly what I needed, thank you!
Thank you found a label maker in the trash tonight didn't know how to work it 👍🏻
Thanks mister u saved my bacon 😂
You just saved me! Thank you for the quick and easy video!
Glad I could help!
Thank you so much. turned out to be easier than I though haha 😅
Glad to help!
thank you so much ! i was going crazy
You’re welcome!
Feeding the algorythm for you bro. Thanks.
Thanks! Much appreciated!
Informative. Thanks.
It was the hatch marks - I wasn't lining them up! Thank you!
I’m glad it helped. You’re welcome.
Thank you! So helpful!
Glad I could help!
Really helpful!
I’m glad!
super super helpful, bless you!
Glad I could help!
Thank you!!!! 😇🫰
You’re welcome!
Any tips for when you reload the tape and it emboss the letters/ won’t cut across the whole tape anymore? Thanks for this video!
Unfortunately I’m not sure.
Realigning the arrows on the two wheels worked for me
Thank you!! I could not do this simple thing! lol
Glad to help!
Perfect, thank you!
You’re welcome! I’m glad you found it helpful.
Very helpful thanks
You’re welcome. Glad it helped.
Thank you SO MUCH 🙏🏼
You’re welcome!
graciassss no encontraba como poner Saludos
THANK YOU!!!!
You’re very welcome!
are the refills also compatible with the Dymo Letratag 100H?
Unfortunately, I am not sure.
Thank you for this, although I was clicking away I wasn't holding the tape in place so it wasn't loading.
You’re welcome! Yup, holding the tape in far enough is important.
How do you remove the loaded tape?
Here is a quick rundown:
1.: open the lid on the back of the device
2.: Toss it into the trash, where it belongs
This is the worst labeler thing on the market since ever.
The video is nice btw
THANK YOU!
You’re welcome!
thank you👽
Thank you!
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great ruclips.net/user/postUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
I agree, the quality of this product is not very good.
Thank youu!!
Thanks!
You’re welcome!
Takes me forever to put that tape through. And its so simple. Lol.
Haha. Pretty simple once you see how it’s done.
How to replace ink from this label maker???
The “ink” is really just the machine pressing the letters/numbers into the label itself. There isn’t separate ink.
For me it doesn’t help. The arrows are lined up but the tape gets into it with the need to push it and then it’s not pulling the tape through naturally like it used to .
MVP
mines not even clicking therefore no loading. it's a piece of plastic with plastic stuck inside and clogging it i think. no way to clean it out either, for a machine so seemingly simple. one star.
Yeah I can’t say it’s well made. I have unclogged them before by sliding the two dials back and forth till you can find the jam and then fishing it out with a needle. Good luck!
I was losing my mind trying to reload this. Thank you so so much! What a poor design!
You’re welcome
This thing is absolutely useless. I have pressed this trigger handle til my wrist hurts, it will not make a letter show on the tape and it will not cut the tape. I’ve wasted my money on this piece of plastic that does not do what it says it will do and I am very disappointed
Sorry yours does not work at all. I will agree, they are not the best quality.
So helpful! thank you!
Thank you!!
Glad I could help!
Thank you!!!
You’re welcome!
Thank You!
You’re welcome!
Thank you!!!