Customer Almost Thought I Made His 2016 Crf 150r A Lemon
HTML-код
- Опубликовано: 9 сен 2024
- 🌴🎮🔥 Subscribe To All My RUclips Channels!!!
Subscribe To My Reaction Channel:
/ @browardveetvreactions...
Subscribe To My 2nd Reaction Channel:
/ @browardveetv2-h3k
Subscribe To My Vlog Channel:
/ @browardveetvvlogs
Subscribe To My Lemon Update Fail Channel:
/ @lemonupdatefails
Subscribe To My 3rd Shift Channel:
/ @browardveetv3rdshift
Subscribe To My Shorts Channel:
/ @browardveetvshorts
Subscribe To My Riding Channel
/ @browardveetvmore
Love the videos bro. It took so many kicks because it was pre flooded from the grip change, those carbs has a mechanical accelerator pump so every time the throttle was twisted it shot fuel into the intake through the leak jet.
And ever more since everytime he kicked it he twisted the throttle
True💯💯💯
Yeah, flooded the crap out of it. Should have held the throttle wide open and kicked it over to clear it out.
@@jth_printed_designs this won’t work on this style of bike better off closed throttle and just bumb start it ngl 2t yea open that throttle and kick it to death lll
Facts them 150r be iffy like that no matter how much compression you got
Beatn tf
Out his bike in front of him😂😂
legit
No cap I was finna say biting that clutch up 😂😂😂
fr
Lmfaoo fr fr, probably why bro thought he almost made it a lemon🤣🤣🤣I gotta go back to work was on break so I can watch the full vid but I seen how he was testing it like damn😂
Messing with the throttle when outting on the grip probably flooded out the carb as to why it took a few kicks to clear it out
I came here to say, that is definitely the reason it wouldn’t one kick. It was just a little flooded from putting the grip on the throttle with the gas on. I was thinking damn Vee didn’t catch that?😂
Damn that motor sound so good getting me in the mood too get back on the bike
NBS
I swear small bore bikes sound so good, that's why I wanna get rid of my 450 for a 250
@@jesse6779 you’ll be able to ride the 250 so much faster than our 450s. I need one too lol.
@@OleMisss thats another big reason I want a 250 4 stroke, can get the power down instead of either wheel spinning or doing wheelies
Sometimes when starting them after sitting or after hauling them you have to tip them over till gas pours out the overflow tube bring it back up twist the throttle a few times then kick. Works like a charm.
He flooded it when putting on new grips
Yeah you flooded the carb snapping the throttle like that when putting on new grips
Use hairspray when putting on grips. Dries fast and grips don’t move when it’s dry. Easy to get the grips off when they are toast
Or spray paint
@@elitecystuning 🤣
Not to correct the Vee magic lol but with 4 strokes they start a whole lot better if you top dead center the piston before kicking it.
what you were doing works a whole lot better for two strokes.
And if anyone is wonder what TDC is, slowly press the kicker down until you feel the kicker get hard, bring the kicker all the way up, then kick it.
Lmao I love the look on your face when you were talking bout it shoulders shrugging and all like what the fkkk 😂😂 it’s got the veetouchhhh!!
You know you're good when people have more fun watching you ride there bike than riding it themselves.
good lol takes no skill to ride on the street
@@ThatsAyz125
Says an obvious hater
drunk on Hatorade.
@@sfsdbincali not hating just riding on the street is not hard anyone can do it
@@ThatsAyz125weird
It's definitely a different feeling on the track vs the street. You will never get to the level of high feeling doing wheelies or n the street as you will racing
Nice work on the bike bro, good job! Enjoy your videos. Keep at it fam. You're a living legend with more to come. Peace.
the reason why it took so many kicks is because you flicked the throttle so when you did that you pumped too much fuel into the engine which flooded it
That CRF150R is a sweet bike. They are expensive new too. *Ppl need learn how take care of there performance machines or get a trail bike* ! Thankfully there is V in FL to help. 💯👍🏻 - Ohio
Vee man it was flooded after the grips being put on g
Vee man the legend 🍋
I just appreciate you bro as a black man doing his own shit 🦾I love seeing us doing positive bro stay up and strong 💯
why u gotta bring race into it
As a white man I just appreciate his work...........
You're tightening the brake and clutch perch too much. They should just be snug so the can rotate if you drop it instead of just snapping off.
Yo, soft scrub and an sos pad will make them white plates look brand new.
Ain’t no way you made them grips look that easy 😂😂
Ok Brother Sounds Good and congrats on the 2024 CFR150R, nice
My husband and Sons love your channel man it only flooded itself out because it's a four-stroke and you was twisting the throttle when you put it on you never have to hit the throttle on a four-stroke with that V touch just remember that anytime cold start or hot
Took 20 kicks because you were giving it throttle putting the grips on and flooding the carb 😂 but it got the vee touch
If my mechanic decided to do a burnout and wheelies after I paid him to fix my bike... I'd be pissed
Good job v Get it in gear
It took 20 kicks because you flooded the motor a bit when you were twisting the throttle when you were putting the grips on
Grips DO NOT always come off that easily 😂 🤦♂️
when put on properly is more worth it to change the throttle tube lol
Remember when you was putting on the new handlebar Roberts you with gassing it up when the bike was off that's why it's gave you so much kicks to turn on cuz it was gassed out you forgot about that not it would have been a one hit wonder. You are amazing dirt bike mechanic 🧰
Lol vee touch bikes like not today 🤣
Spray brake cleaner in their slides right on five minutes they’re dry and tight and they don’t move. Been doing it to Harleys for years and my 13 years of racing motocross and arenacross
Love your video’s vee good stuff.
That fulla gonna blow it up before he even learn to wheely🤣
actually he does know how😝, mad you don’t have one?
Yes I had to do an adjustment before having customers pick up and they always question me like did you really fix my bike or just take my money…
But like this one dude, he blew his bike up right after I rebuilt the top end. He didn’t mix the gas. Then says “you fix my bike just enough”. That’s not what Millenium said haha.
All my stuff is documented, recorded, and make sure bikes are 100%
I will give you a tip, when you’re putting new grips on, soak them in hot water for 5 minutes and they become easy to slide on. When they cool they are firm and job done
I will give you a tip, when you replace the grips, buy the ones with the clamp/screw so you dont have to worry about any of that crap.
You can also put air with a compressor in it while pushing it on
No bro you all good you Flooded it when you put on new grips on the bike is fine just to much gas
Tight to see you turn the wrenches for once bro!!
Yezzir
bothers me he didnt warm it up 😭😭
U was hittin the gas it was slick flooded
Great job. Traffic on that street sucks for testing
def got the vee touch , its them 150 them shits never start 😂🤣
If urs doesn't start that means its clapped the fuck out and need a rebuild
not true 150r is a notoriously weird bike to start just how the motor is
@@keld1d im a proud owner of one ...I can go in my garage right now and it will start first kick no choke ....if the bikes don't get maintained properly and have a ton of hours on them valves get tight and carbs get outta wack i completely rebuilt my engine new oem crank, bearings,cylinder ,HC pro circuit piston it absolutely riiips my 200 lb ass around like nothin
@@willkelley7747 ye but still even perfect bikes can still be hard to start just how the crfs are
lmao 🤣i dont even own one them 150 dont start 😂
You know it works good is taking a razor blade to the grips if you have a problem pull them off that way.. and use hair gel to put them back on just a little bit or even Hairspray you got to put it on quick though once hairspray sets it won't move but it's slippery for like 15 seconds.. I prefer to use hairspray it works better your shit won't move at all .. but it sets up quicker than Jill
You’re suppose to use the grip glue:
The person that put them on before didn’t use the glue either that’s why they were so stretched on to the bar, and came off so easy. Give it a couple weeks those grips will be slipping on the bar and throttle tube.
Man was scared to jump on the 150 lol
I have a 400ex i need top end rebuilt. Can you help me out. I'm in Alabama
You Alabama wierdos are definitely in bred lol he’s in Florida lol do you know how far Florida is from Alabama you in bred. 🤡🤡🤡🤡🤡
Them stains as you put it sure aint permanent. Just sand them down then polish them ive done plastics way worst than that mate. Good videos though keep it up G
it took a lot of kicks to start cause when u changed the grips u twisted the throttle slot and it’s also a 150
Got an SSR150. Wish I would’ve bought something more quality made had a some issues but I’ve been having fun on it.
I like ssr they arnt bad. You can make them run pretty nice for the money
Just save up for some months and sell it and buy a Honda 150 or 85cc
BRUH GOT TO MUCH MONEY TO MESS HIS BIKE UP 💯💯💯
You gave it the Vee touch and it wouldn’t crank or do a hole shot for you haha
Need to adjust this handle bars up a few clicks, better ride
Put that Vee touch on it🤙🏼
V I know the bike is fuel ejected however I know for a fact if I turned my throttle before starting it would not start right away Remember you turned the throttle several times when you were put in on the grips
And I'm referring to2018 CRF450R
Also I love your blog and you're one of the best Bike mechanic I know. Keep striving and take over the 🌎
that bike is carbureted, and if a bike is fuel injected you can twist the throttle all you want and it wont flood or anything when the bike is off, nothing happens unless the bike is on
You a rider bro love it
Working out paying off big for v he got them pipes
Damn that 150r sounds and looks good
Bruh rode tf out his bike haha GONNEEEEE
i wish this dude was where i live. id love to take my bike there. i had a valve adjustment. overall look over by a guy. i have a 2003 crf450r. the bikes not a fan of idleing. it likes to shutoff after it warms up . can never let it idle. maybe i need a carb rebuild.
Those 150s rip... I need one
bro you are an amazing mechanic, getting those boys bike right, like better from out the factory.. you is a real deal boy, even more important you are getting the stats down of black hoodlums all turning out to be losers, drug dealers and gang bangers.. good for you brother you should be very proud..and also one should not judge from looks , perfect example
First off dude tried putting grips on when he seen the throttle tube was over to much and he does good work 🤣😭 oh my lord I wouldn’t trust a damn thing 🤣
No shit thats what I was thinkin when I seen that
Yo I’m tryna bring my bike. What do I gotta do?
mans like damn let me ride mane
Damn yo I wish u stayed near me I need my shi worked on
15:08 - 15:20 iguana crossing the street lol
When you was putting the grips on. You was twisting the throttle dumping fuel Into cylinder 🤙. No worry’s
When you put on the grips you flooded it. No big deal. It cleared right up. That is why it took 15 kicks.
Good job #Godblessup
Wd 40 get them stains off that white plastic love your vids there the best
Nice cut g
flooded it a little pumping the throttle putting the grip on thats all..no lemon
Salute bro I love wat u doin bro I need your help on my bike getting it running I’ll come to ya
Bro that 150 took like 10 kicks my 85 starts 1st or 2nd kick almost every time
Compared to 2 smokes, 4 strokes take forever to start, especially them 150s
Yeah that’s true my four wheeler takes forever to start but my 85 starts no problem
My 150rb kicks first try the flooded it
And clear spray paint works wel as grip glu
It’s a Honda it was born a lemon
What is a lemon
Carb bro you flooded it no biggie
Definitely revving it to long
There’s this stuff you can get at auto zone called orange hand cleaner or something like that lmao, an you can rub it on the stains at it’ll remove them, I did it for my bike
This guy looks like Eddie Murphy.
I wish you stayed over here
It was flooded cause of you keep open an closing the revs when changing the grips, can you find me an nice crf at a good price?????
Get back to me fam
This dude needs a 250 or a 450 cuz rideing it hard like that all the time is going to blow it up fast
No ....it will not lol shows what u know ....the 10 year old kids that race those bikes absolutely riiip those bikes they take some serious abuse
@@willkelley7747 I agree buddy I've been riding for 15 years my point is if you ride them hard all the time you do risk blowing them up but either way you have to adjust the valves every month or 2 if you ride them hard
@@nickolasvaughn667 doesn’t matter what size the bike. Every bike will blow up eventually,it’s part of riding
@@tgfgaming6336 no 💩 but it’s a big difference when it blows in 2 years than 5 or 6 you can make it last
@@fololoco6420 sorry I don’t baby bikes,I ride them how your supposed to o and also where your supposed too in the dirt
good torque Bro
hair spray the best grip glue
Love the energy but you ain’t gotta shred my boys tires like that
He mad about them oil marks or whatever they are he look pissed
Hairspray for them grips
🔥🔥🔥🔥🔥
It most likely flooded from putting the grip on
it took 20 kicks because you was messing with the throttle men you took on the grips. and it got too much gass in the carburetor
It’s a 150 it is a lemon lol
( rider of a fully
Modded trimmed down xr628r ) lol
I just bought a 2021 Crf150R what’s the first thing I should do to it before riding I still ain’t rode it been like a week tryna learn more about the bike since I’ve only ridden 2 strokes
I’m 13 looking for one my dream is to have one of my own just ride normally but I gotta practice to do wheelies and all that stunt I just a normal rider
the goon side of bikelife
Son got the Coronavirus emblem hair do😳
Nice Video Bro, I live in Lauderdale, where you located at like off of 31st or 21st Street like near 19th or something, you got any bikes for sale i am looking for a YZ85 or a KX or RM 85, hit me back, Dave
I’m up in Wellington with a 2024 crf 150 r we gotta go ride
You didnt help. First you wasted those grips by not gluing them with hair spray. Now they will twist and aren't safe. Second the handle bar was sticking through the throttle sleeve to making the grip causing it to stick.
Not how to change grips that was a whole load of aggression looooool
what a bunch of goons
Wonder how he got that bike 🤔
The bike loves you. You just flooded it when you put the throttle grip on that’s all.