Это видео недоступно.
Сожалеем об этом.
Arex Rex Delta - Is This The Best New Polymer Striker?
HTML-код
- Опубликовано: 14 авг 2024
- Thanks for watching! Be sure to leave a comment and a thumbs up if you like the video. If you like what you see, consider subscribing and there’s more content on the way.
Music by Onlap.
![Baby Kia - WYG (feat. LAZER DIM 700) [Official Music Video]](http://i.ytimg.com/vi/avlLsOH_oJc/mqdefault.jpg)
![Megan Thee Stallion - Mamushi (feat. Yuki Chiba) [Official Video]](http://i.ytimg.com/vi/OdxSbc0ap-s/mqdefault.jpg)
I’ll take this over any other gun on the market right now.
It fixes almost everything Glock refuses to (for me)
It conceals great, and it is very reliable!
I blacked out the rear cocking indicator (Sharpie) and painted the front sight with some orange glow in the dark paint.
I have been carrying it for about 6 months and I haven’t gotten bored with it at the range yet.
I guess I'm in the minority on this one. I find the ergos more comfortable with this gun over the Glock 19. The recoil was very manageable. I didn't mind the 5.5-6 lbs trigger because of the clean break and excellent reset that follows. It's by far better than any stock Glock trigger I've felt. I prefer the look as well over the boring Glock look. Fully ambidextrous controls that actually work. I paid $425 for it and I think it's a good value for all of the features it comes with.
Is it as good as the P-10C?
I would say no but it's not that far off.
Anything that doesn't have metal spikes drenched in poison has better ergonomics than a Glock lol
It’s the great thing about having options. There’s something for everyone! Thank you and cheers!
yea. what doesn't have better ergos than a glock?
2x4 grip > Glock lmfao
I paid $360, I own 21 pistols , and this gun was the size I've been looking for. Smaller than my G19 , lighter , comfortable, feels better than my G19 in my hand . The CZ P10c (big to carry) edges it in many categories except for size, btw its trigger has actually gotten better after 1000 rds. Bottom line is buy it. No plate for optics which sucks.
So far I haven’t seen much negative about this thing. It’s good to see an honest review.
Thank you Joe! It will be interesting to see more reviews on this. Perhaps I’ll be in the minority. Cheers!
Opinions are like assholes. Everyone has them. I can't stand this guy review because it's all personal shit instead of actual review of the gun. What do you expect from a GLOCK FAN GUY???? I would RATE his review 1 out of 10. Enough said. 🤣🤣
This is a good thing! Another good pistol on the market, some will like it, others will not. I have a lot of pistols and recently bought a Rex Delta. Today, Delta is my EDC weapon. More ergonomic and snappy for concealed carry, excellent precision and finish, the slide has grooves for better grip and the grip is ergonomic and comfortable, the trigger reset is awesome, good price, it is an extremely good choice.
Still like it? Some have reported premature barrel and slide wear, mags are noisy, polymer feels cheap. Just wanting to know if you still like it. Deciding between this and IWI Masada.
@@arthurwood7525 I have been using my Rex Delta for 8 months, daily. I use it on a Kydex holster. I don't think the polimer is cheap. The mag is made by Mec-Gar and is very good finish, I think is better then polimer mags. I still thinking this is a very good pistol.
@@AlvaroMB cool bro thank you
On disassembly everyone keeps saying to pull the trigger first but you don’t have to. AREX said you do not have to pull the trigger that’s why the disassembly is made the way it is.
I have never heard of this gun or even company before but I def wanna get my hands on one at the range
Right on! Thank you and cheers!
I have one. Very nice shooter. Grips take a bit of getting used to. Scotch Brite or fine sand paper will smooth out the edges if you find the angles a little sharp.
The zero one pistol is really fantastic.
Arma excelente para o porte diário!!👍👍
So Far you have done one of the best reviews of this pistol. I'm now a new subscriber.
Thank you very much and welcome to the channel! Cheers!
I think the original Arex Zero One is awesome, but with the CZ P10C, the M&P 2.0 and Glock 19 being available I'd be interested to see if people will buy the Delta or not
I completely agree brother! Thanks for watching and cheers!
Tac toolbox in the house!!!! Nice to c you suportn other pewtubers man, thats why tac toolbox is the best☝️🤠👊👊bak up top!!!!
P320 over all the pistols you mentioned. I own all of them and the sig shoots straighter and softer than any of them
I have a Rex Zero 1s, M&P 2.0 Compact and 2.0 5in FDE which is a great shooter and been very impressed with the 2.0 line overall. With that being said, I do intend to buy the Delta as an a addition.
I love my Delta!
Great review as always! You know what they say about a camel being a horse designed by committee...Delta, standing for 10 guns they copied. Agree, too angular and I see a little bit Glock, some PPQ, Ruger, Taurus, Springfield, a little of this and that, etc...
Very well said Mean! There’s a lot of influence here but maybe too much? Thank you and cheers brother!
I’m all for ultra aggressive texture everywhere because I have no problem taking sandpaper to my polymer frames. However I do realize many people aren’t comfortable doing that and don’t want the scuffed up look
I hear you though it would be a shame to have to do that when there are other options that may better fit the bill. Thank you and cheers!
Many folks complain about some handguns that the grip isn’t grippy enough but if too grippey a little sandpaper to take down the edges can make it your own like a CZ 10.
After seeing your review I am sure I will check out the Rex but keep the review in mind, thanks for all the great information. Thanks for the video and great job on an informative video!
Right on Mark! You’ll have to keep me posted if you get one and what your thoughts are. Thank you and cheers!
KS, it's me the negative naysayer. This is a gun that's interesting. As usual, your videos are very efficient and top notch! I may be critical of many guns but never your videos. I also think the grip design needs alot of refinement. It looks very 15 years ago. Although the overall geometry and undercut look well done.
Thank you MIO! I do agree that some refinement would go a long way to help this one out. The weight is ideal, so maybe a next gen will get the grip sorted out. Cheers as always!
I love this pistol 👌🏼💪🏼💪🏼💪🏼
I really like the little trapezoid shaped spot on the front of the frame to put your thumb on. I really wish glock would start doing that as well. I really like how much it helps a thumbs forward grip.
Great point Brian! Thank you and cheers brother!
Adding some Talon Grip material to the front and back of the grip and on the trigger guard takes care of any comfort issues with this gun. I'm speaking from experience. Otherwise, this gun is fantastic, especially for the price!!
I really appreciate your videos. RUclips is truly unfair with what they are doing. You are 1 of the most low keyed gun guys on RUclips and give great info. Thanks for all you do.
Thank you very much Jeff! Truly means a lot my friend. Cheers!
Great info, I’m happy with my Delta so far, feels really natural with my personal grip and hand size. Do you happen to know if the rear sight mount is identical to a Glock or other common sight mount? I’m interested in the OuterImpact adapter for mounting a Reddot without drilling and tapping holes. Thanks in advance if I get a reply!
Finally someone brave and honest enough to call out the exessive trigger pull weight. Big kudos for that!
For the gun itself, it is disappointing to hear about the heavy pull, I was that close to ordering it immediately based on the overall reputation of the brand.
I don’t mind 6 pounds but any opportunity to have something lighter is preferable in my opinion. Thank you and cheers!
Yea I waited on this review and im not interested in this one. I held one and like you said just felt weird so I passed till I heard more about it. Thanks you saved me 400+ bucks 👍
It’s an odd one indeed Youngguns! I think there are others in this price range and size that are just a bit more refined. Thank you and cheers brother!
An honest review. 👍
Thank you very much! Cheers!
Another great video, but not going to get away from my good ole CZ P10C :D haha
Thank you very much Tango! Tough to beat the P10C. Cheers as always!
TangoXrayNiner - I have to agree with you brother. The funny thing is that after purchasing and shooting the P 10C I can almost shoot any striker pistol well. The ergo, the trigger, and the accuracy of the P10C are just great. At the current price it’s hard to beat CZ.
Liked my Zero 1 so maybe I'll give this a shot. Might as well add to the collection, but I doubt it will surpass my M&P 2.0 compact. Definitely does not win in the aesthetic department lol
It’s tough to beat the M&P 2.0c Tony. They are awesome guns and the price is right on them. Thank you and cheers!
I know right? I've picked up a few new guns the last 3 years that I've gotten into them. (it's like drugs, I think? LOL) some I want to like more then others but I keep coming back to my M&P 2.0 and I'm like wow I like this gun! I paid more for some of the others I have and do like but want to like more then I do if you know what I'm saying. S&W just got the 2.0 right!!
@@KSGunGuy01 Like the 509 Myself Just wish it wasn't so expense : Especially since an APex is a Must
@@RedRoyce they really did perfect the striker fire value friendly game. I have a full size 2.0 for duty and a compact for conceal carey
Surpass your 2.0, lol. P320c shoots softer and straighter.
CZ P10C sells for about 370 dollars. It’s an incredibly accurate pistol made from a Top Tier Quality manufacturer that has an outstanding “real” trigger. This pistol is late to the party from a don’t know who, please tell me your name again manufacturer. I’ll pass on this one, but thanks for showing us this video.
Completely understood! Thank you and cheers!
You don't have to pull the trigger to disassemble it. Positive point to rex in this
He had to pull tue trigger cuz he pulled the slide back farther than was needed, at least thats how a glock is and that gun is built like a glock!
@@DC4EVA The rex is different, no need to pull, even when ready to shoot
That's an interesting new gun. I like how Arex is trying to make the same stuff other companies already make, in the future they'll make even better polymer striker fired pistols. I'd give this a try, but it wouldn't be my first choice... I believe the Rex Zero would be better for me.
I think you’re right about future releases! Thank you and cheers!
I handled one about three months ago and the trigger felt great! Ergos were OK but while racking it I was let down with how rough it felt. If the accuracy is there then I would say it is worth it. The one I looked at was going for $415 Brand new.
The grip angle looks pretty similar to a cz steel frame but a lot more barbaric...
You can see the inspirations from several manufacturers and maybe they are trying to perfect them all in one. Needs some more refinement though and I can see it being a great comfortable shooter the next gen BUT I’m not interested considering we have endless opportunities to build and buy something for our preferences
While I looked very close at the zero I just went all in on a sig 229 ase. No regrets. Arex is still missing something for me personally but it’s awesome they are trying and seem to be doing well
And then you hear the price.... note to self make sure you watch the whole thing before commenting... if I see one at a good price I’ll try it and take some elbow grease to some of those edges
I hear nothing but good things about the Zero 1, though the 229 is tough to beat Rooster. I do agree that they priced the Delta well. Thank you and cheers!
Oh I'm extremely satisfied with my purchase!! 💪💯
Awesome review and thanks. Perhaps I missed it how was the reliability?
Makes me think of a VP9/Ruger American combo in some ways.
Wow >> 30,000 Subs can't be wrong !!!! BTW this looks like a good gun on a Hollywood space ship
Thank you very much Dan! A great group of shooters we have here my friend. I do agree about the Hollywood analogy. Cheers!
Not sure, as I don't own this (and wont unless it goes on crazy clearance), but I can give a suggestion, the cuts under the trigger guard are for people who put their support index finger on the front of the trigger guard. On guns I hold by the front of the guard, I often add grip tape to the bottom of the guard for my support middle finger. My hands sweat a lot, so I generally have issues with grip and that helps.
That makes a lot of sense! Thank you for sharing and cheers!
This firearm is definitely modeled after the Springfield XD mod 2.
And Springfield XD’s kind of Suck!! Slide Heavy with a lot of muzzle flip / perceived recoil, Stupid grip safety, and small mag release. Have owned several different XD & now the mod 2 tactical, that’s my take.
@@nmhvactech5474 I've had a full size Mod 2 and SC Mod 2. You are right about the slide height and extras but they shot really accurately for me at least. Just not my thing with all the extra safety features.
Then get an xdm
4:40 i believe the term for that excess plastic from molding is "flash" or "flashing". Great vid btw!
Good to know! Thank you and cheers Diego!
Been working sooo many hours...but I am trying to catch up on your always excellent vids!! Cheers brother 👊🏻👍🏻🇺🇸
Thank you Fresh! Much appreciated brother. Cheers!
I just received my arex delta m. Mime did not have the same texture style. It is more like a 220 grit sand paper. No ruff angles. The only texture on the slide is the trapezoid for the thumb. Mine also has 3 slots on the picatinny rail. Mine came optics ready with 4 plates. I have a red dot on mine. I got the Fde color/ black slide for $469. Not many rounds through it yet but I like the way it handles.
30k man CRAZY remember us first subbers when your 1.8Mil
Haha! Thanks 88. It’s been a fun journey because of awesome shooters like you! Cheers as always brother!
Hey KS! Thank you for doing this video! I’ve been waiting for a good review. MAC did this as well, and he too noted the sharp angles. I was hoping this would be a great gun after seeing the pictures from Shot Show. What’s the chance of you doing a review on the Stoeger ST9? I’m interested in that as well.
Off topic question; because of your videos on the Shield, I’ve decided to make that my next carry gun. Are the differences between the 1.0 and 2.0 noticeable? Any caveats? Thanks for the great vids!
Thanks for the questions Scott! The angles are odd indeed. As for the Stoeger, we shall see. There are several that need to be done before I bring anything else on. Congrats on the Shield! There are definitely differences between the two. The 2.0 will have a better trigger and more substantial grip texturing, though some think it’s too much. I still recommend it over the 1.0. Hope that helps. Cheers!
Another 4" barrel polymer striker fired gun. After the Glock 19 success all the handgun manufacturers keep making the same gun with a few suttle differences. I guess if I was a handgun manufacturer I might also try to copy and improve the most popular handgun. Looks like the Rex Delta falls short.
I do agree Randy! After a while they all begin to look the same. Still fun to see what different manufacturers come up with. Thank you and cheers brother!
I think that it has potential in the market based on price point, the fact of how light it is, and the ease of disassembly. I personally did not handle this pistol but have been very interested based upon those features; will have to see how things go though and if there are any mid release changes made. Based on KS's review I am a bit skeptical yet. I trust his take on things because we have very similar opinions.
It actually took a long time for anyone to make a direct G19 competitor in the same size. There were smaller and bigger, but nothing the same. This was strange because in a lot of ways the G19 is the perfect size for a lot of applications. But not the dam has broken and there are quite a few poly-striker guns in this size. So if a manufacturer is going to try, they need to have better features and/or value than what's out there. I don't see it with this one. As far as I'm concerned, the best value in this size gun is the M&P 2.0 Compact. Stronger, better ergos and features than the Glock 19, and significantly cheaper.
@@bbmw9029 i would agree with that assessment for sure it is hard to beat the M&P 2.0 but I also like the FNS 9c it is very similar to the M&P 2.0 but with stippling more like the CZ P10c and is completely ambi controls like the XD by Springfield. It is one firearm I think gets overlooked far too much and like the m&p it is 17 round capable and has Apex trigger availability. The G19 in my opinion is outdated and ill equipped out the box for the money. The Delta has some appealing features but needs some refinement in areas to truly make it a contender with the big names it is the first offering I am sure that they will absorb the reviewers and consumer feedback and make tweaks and come out with a gen 2.
I don't like the glock sights or trigger. I'm more of a FN guy
If you are operating this weapon with a gloved hand, I would imagine that those sharp edges would be more of a benefit for grip, than a nuisance. However, I would imagine that the average shooter would be better off sanding them down. Nice review as usual.
It’s unfortunate to buy a firearm and immediately have to sand down the frame just so it will be comfortable. I think there are other options that just do it better. Thank you and cheers!
That is a good looking piece. Sharp corners? I didn't see anything that I couldn't fix with some fine grit sandpaper. And that take-up, think safety. A bit longer/heavier to the wall, clean break, short reset is good there.
I do agree that the clean break and short reset are ideal. That said, a pound lighter would still be safe and preferred by many. Thank you and cheers!
Good review. I will give it a try. I like the weight of it.
Uma excelente pistola!! No porte velado, considerando capacidade e ergonomia é imbatível.👍👏👏👍
Love the Delta pistol
Awesome review KS an thanks for showing this Firearm Sir
Thank you very much Jerry! Cheers brother!
Nice review. Doesn't grab me,
I hear you Keanon. Thank you and cheers brother!
really good review! I just got one and I am excited to pick it up, I have glocks and a P320 and I wanted something else that also fits some G19 holsters. under $400 online
Hell I'm torn between a p10c and Beretta inox I know I'll get both but which one first ?
I own the P10C and it’s great. I like the way you think about getting both. You can’t go wrong either way!
KS I noticed in a few sneak peek vids of this that many of the testers were wearing tactical gloves and I believe that they aimed at ensuring that the grip texture provided excellent traction with wet or muddied gloved hands. Naming it Delta in a sense kind of denotes that it was intended as a duty sidearm maybe geared more towards professional operators than civilians. Let's face it we are one of very few countries that allows its citizenry to keep and bear arms so the majority of the global market is military and police and a large percentage of these wear some form of glove now-a-days. I do agree that one should not have to buff down sharp angles to comfortably shoot with bare hands, I felt that the P10C Gen1 texturing was overly aggressive like that and was quite pleased with the refinements of the P10 G2 series.
Being it is a gen1 pistol and the attention to quality that came with other pistols from this manufacturer previously they will be taking notes and make slight changes rather quickly based on consumer feedback. Let's face it there aren't too many offerings that can match how well S&W made their 2.0 grip textures on the M&P line it is my favorite out of the box grip surfacing for sure and I think it sets the barr for what a grip surface should be. That being said the new Steyr grip modules and surface may very well have raised that barr although I haven't had any significant time handling it in a range day yet I did get to handle one at an expo a few months back and it is going to have any Steyr fan giddy that's for sure (hint hint 1776) 😊
I have seen other reviews of the Delta where testers have said that they didn't like the first impressions of the trigger when dry firing that it seemed heavy and rather long traveled. But that when it came to actually shooting the weapon their opinion was changed and that they found it was rather pleasant and very unnoticeable; was this the same experience for you? I know that of all the reviewers I watch you and no offense are like me and a bit of a trigger snob so to speak. Would love to hear your thoughts on that and maybe after another range session wearing shooting gloves. Great video Thanks for Sharing Brother see you Wednesday for the chat.
Very good points Coiler! I do agree that its intent is most likely for law enforcement and such and they may benefit from the grip contours. Time will tell on that one. As for the shooting, during slow fire, it wasn’t bad at all and the reset is fantastic. During rapid fire, the ergos just made it unpleasant but it was still reasonably accurate. I am no doubt a trigger snob which plays into things. Tough to avoid that. I may do a follow up but haven’t decided yet. We shall see! Thank you and cheers brother!
@KSGunGuy I heard that the Rex Delta is pre-cocked and the spongy trigger is caused by the trigger fully pulling the striker back to fire. I don't have one to check it out. The red cocked indicator in the back should move back a tiny bit when pulling the trigger back to the wall.
Yes, I believe you are right C! Very good points brother. Thank you and cheers as always!
Ordered one and got it today and that medium backstrap dug so badly into my palm I can still feel the rawness in my hand. Also noticed the trigger does pinch just a tad too on my trigger finger
Yikes! That's no good at all. The grip can definitely be rough. Thank you and cheers!
Get some sand paper, and then run over the grip angles a few times.
OK...Between you and MAC's reviews, I just can't decide. I am still interested, but I am losing the urge to just impulse buy it. I had such high hopes. Oh well, I'll just build another P80 instead :)
I think it’s worth getting in hand at a shot to see if you like it, though with some many options out there... well, you know. I think another build is definitely in order! Thank you and cheers brother!
I have mine on order it’s due in next week but after seeing the review I think I’m gonna be a little disappointed just because I really hate trigger poles over 5 pounds because of my arthritis in my hands. So it’ll be fun to check it out she did a little bit but it’ll probably be moving on down the road from my collection.
I’m having a hard time taking off my back strap what suggestions do you have to change it out to bigger one
Hammer and punch from left to right
I really liked the look and feel of this one so i picked it up. However, I am having difficulty finding holsters for mine. The guy at the gun shop suggested that it looks like it would fit in a Ruger security 9 holster. Anyone have any success or suggestions on holsters?
Outstanding review, as always.
I always like to see people's first impressions of a firearm. That normally gives you their true belief about it. If you're doing two or three or four takes, it almost seems like you're forcing yourself to like the gun.
Right on! Thank you and cheers!
I have xdm .45, the texture used to annoy me, I used ladies foam finger board (file). It took care of it
I may pick one up when they are $350 or less
Right on! Thank you and cheers!
Great review. Question about your slot comment about it only having 1 and you were expecting 2 or 3. Why were you surprised by that when every Glock 19 that I have seen also only has 1 slot?
You can buy a Canik TP9 SF Elite One Series for $299 now. Granted, it only comes with one magazine, but you can purchase extra mags for $25 at Gun Mag Warehouse and still get a gun every bit as good as this for less money.
Those look very cool! Thank you and cheers!
The slide serrations are unidirectional, you can rack the slide but the bad guy can’t get as good a hold trying to strip it away from you.
@9:30 I am not too sure about this .. I was never 100% on Glocks with just 4 small tabs VS full contact . What could possibly go wrong in the worst case ??
Great point Dan! Thank you and cheers!
Woa, not what I was thinking. I'd rather STIER. Thanques I appreciate the review KS - haven't seen any other Rex Delta reviews yet but this review will be highly reccomended from me. I love their RexZeo1 line - fantastik! The designers should take some feed back on this and try a Gen 2 because I would love for ARex to have a great polymer pistol and why not, everyone except "Ole Green" has a good polymer gun. Haven't touched the Mossberg MC yet but I understand it's a good alternative to the Sheild and G43 lines...
I agree about a gen 2. They had some good ideas with this but there’s refinement needed. The Mossberg is a great little gun! Thank you and cheers!
Nice review. Thank you.
Drinking game:
Have a drink every time he says "no doubt" 😂
Great review as always. Looks like an interesting pistol.
Thank you very much! The Delta is definitely interesting. Cheers!
Very good review thanks. I couldn't try but this gun was an option for my next purchase. Angle and grip, too much light weight (yes, i like more heavy weapons) and trigger were my concerns about this gun : you answered them and i'll pass. You were way more realistic than some gun channel too kind for glockish new stuff.
Very interesting review. The polymer or plastic just looks cheap to me. Kinda like a toy type of plastic versus what the other manufacturers are putting out. I appreciate the full lefty controls though.
I think I'll pass on this one but thanks for the review! You are my top reviewer.
Thanks BloodySoup! I do agree that it looks and feels a little toy like. It’s accurate though, which helps. Cheers as always!
Bloodysoup74 I couldn't figure out what it looked like. But what you said nailed it. Looks cheap and almost fake
@@BassFace1776 Yeah looks a little off. Maybe the stippling and the looks of the trigger does it in for me. Idk lol
Good review. Interesting first pass for Arex. Would agree. There really aren't any angles on the hand. If it is uncomfortable to shoot then no go for me. Very light. As mentioned. CZ P10c or P07 are more attractive offers to me and I have them both. Be interesting to see how they refine it over time. Future models have potential to be super cool.
I do agree that future versions could be very good. We shall see! Thank you and cheers!
Internally it’s a Springfield XD clone. Honestly I was thinking this was just going to be another Glock clone, but it’s definitely not. Sure it’s got a lot of inspiration of a lot of different guns, but it’s basically a reimagined Springfield with a Glock takedown.
Like the video as always.
Very interesting! I hadn't though about the similarities to SA. Thank you and cheers!
Barrel looks exactly the same but 4" to xd mod 2, maybe same rails as well etc.
Interesting indeed. I haven't seen, or held one, but they are trying to get into a very hot, and flooded market. It's going to be a tall order to catch up with all of the 15 round ploymer wonders on the market.
I think this one missed the mark a bit but hopefully the next iteration will get things dialed in. Thank you and cheers Texican!
@@KSGunGuy01 I'm almost caught up. I thought I might get a little KSGUNGUY overload, but nope!
You’re a good man! Much appreciated.
Probably cuz it's a DA striker fired pistol.. lol
cant wait for my gen 2 to arrive..
It's seems like good quality. I hope MAC runs it through the gauntlet to see if it can perform like the reining champ, the first Arex. Gr8 vid. 🔫
It would be interesting to see how it does. Hopefully he’ll make that happen. Thank you and cheers Chicano!
the glock polymer is very flexible and very resistant, it has tolerance for deformation. The arex polymer appears to be very rigid looking at video, if it's true, it may be weak against blows.
Hard to say. Thank you and cheers!
Msrp on 09/15/2020 is 399.99. (Buds has for 369.99) that's amazing for what you get and being smack dead of covid/riots/antipolice era. I find the delta to be extremely underrated.
KS I love your reviews I watch almost everything you put out. I'm not really a fan of striker-fired pistols. I would love to see a Rex zero 1 review from you. It is one that I've been thinking about buying.
Thank you very much James! Hopefully a Rex Zero 1 will be in the cards at some point and there’s some other fun steel coming up soon. Cheers brother!
I really want to just move to florida
When you need a pistol and you're worried about its radar cross section....
Lol. Good point. Thank you and cheers!
That is a gun that is begging for a stipple job for sure. I do hope this gun gets a foot hold in the market. I know a lot of people will yawn and say, "Yeah another polymer wonder 9🙄" but if arex listens to customer feedback as well as Canik, they have a great looking pistol to build a following with.
Very well said on all points Jarrid! Thank you and cheers brother!
Looks like the ruger american and the ruger security. Had a love child and this spewed out.
lol. Maybe? Thank you and cheers!
Seems like it could use some fit and finish improvements. Looks like a decent gun but has some stiff competition, not sure it's going to take off
I completely agree D! Great point about the competition as well. Thank you and cheers!
Pretty cool but with pricing being a concern and the amount of good guns less than this one could play out poorly.....Who knows as time will tell....Good info as always sir....Good stuff....
Very well said Scott! Thank you and cheers brother!
Very Nice Review, I’m personally not very interested in this pistol! Carry on
Thanks Big J! I hear you there. Cheers!
I'm not interested either m&p and Cz all the way💪💪💪💪
Anyone have issues with the mag release? I seriously have to hit it with my purse in order to release my magazine.
Bro if they softened those angles up, HK would sue them. That’s a fucken VP
It’s actually quite different from a VP9. Thank you and cheers!
Good stuff!
Thank you Keith! Cheers brother!
Another good and honest review brother. Looks to me they over did it trying to make a perfect gun. Lol
I'll stick with my m&ps, looking to pick up the new czp10s.
Great video, carry on.
I own a CZ P10C and fired an M&P shield pistol last month. After two rounds to familiarize myself with the M&P trigger it shot just as well as the CZ. The polymer striker fired pistol manufacturers have gotten so good that it’s hard to differentiate between them in terms of reliability and accuracy. The CZ P10C is just a great pistol at its current price point. You will not be disappointed.
Thank you Mike! I agree with the overdoing it. M&Ps and CZs are great choices indeed. Cheers brother!
I like a nice grip, but after shooting this gun at Shot Show Media Day... it was the first and biggest turn off. I told the designers and the reps there... they seemed insulted. lol. In particular it was the angles on the front of the strap.
Yeah, it’s been a real disappointment. Thank you and cheers!
$360 at Buds. Hell yeah.
Does anyone else have trouble with their hand getting caught in the slide? Like there isn’t enough distance between the dovetail and the slide and if you are not careful you can get a nice whack from the slide
Also you're like the 4th or 5th video I've seen that says it comes with a 17 round clip? But I have to 15 rounds one of them does have that little bump stock to give it the appearance of maybe being a 17-round but I assure you it is not. Not that that's a bad thing I mean 15 is still plenty
That’s why we have Dremels.
Dremels are a slippery slope 😉
Let me guess..another "Glock killer" ? LMAO
Beards4thewin J Glock must have died 100 deaths by now lol
Tough to dethrone the Glock. Thank you and cheers!
I don't know much about this gun but just wanted to give my my opinion and you can disagree not thin skinned but the Walther P99,PPQ ,H&K VP9, CZ P10c,Canik TP9sf, sfx,elite combat,Sig P320 x5 ,Ruger SR9 hell even my 330 dollars Sar 9 are just as good as a Glock and most are better in many ways ergonomics trigger pull and trigger reset I'm not saying Glock is a terrible gun but it's not 1990 there are much better options today 2019 many at a much better price than a Glock many hundreds less Canik is the new Glock my new Canik TP9sfx costed 460 dollars out the door and comes with many things with it two 20 round magazines 4 red dot plate mounts a holster Warren tactical sights match grade barrel all for 460 dollars not to mention the trigger out of the box blows most other stock triggers away including Glock and anything striker fired if Glock included everything l got with my Canik TP9sfx the price would be 900+ dollars at least not counting the aftermarket trigger the Glock will need to be as nice as the Canik l sold my Springfield XDM 5.25 9mm to get the Canik TP9sfx and l couldn't be happier the trigger on the Canik is better than the XDM was with a 165 dollar powder river trigger that was in the XDM in trigger pull and reset the stock Canik trigger is better any new Gen 5 Glock 19,17 are at least 500 dollars costing more than the Canik TP9sfx with everything mentioned above to me the Glock is no bargain and l think way over priced for what you get l don't blame Glock for it they make customers feel there gun is completely untouchable by any competing company and people buy it and if that's your choice I'm fine with it but l don't buy it
No, that title belongs to SIG. Lol.
@@gloriamaletta8667 i couldn't agree more
Do you think this is as reliable as their steel framed hammer fired pistol was? That thing was unstoppable.
Probably not. Thank you and cheers!
How did you get a hold of this one already? I just saw them available yesterday, and the price is surprisingly low! If you ask me, this pistol looks like something from the Predator movies. I like the look and the trigger appears pretty nice too. I just don't know if I will grab one or not. I would still like to get a hold of the Rex zero 1 first. Have a great weekend brother, be safe out there.
I ordered it the day K Var had them in stock and thankfully they shipped it quickly. I agree about the predator thing, lol. I hear nothing but good things about the Zero 1. It’s on my list as well! Thank you and cheers Fu!
Man i hope they make a 10 round mag for pos states like mine
I appreciate your content and hard work, so this is NOT directed at your review. Come on, gun industry! I'm BORED already! ANOTHER mid-sized, polymer 9mm??? Glock, Smith and Wesson, CZ, H&K, Sig Sauer, Walther, Canik, FN... This car is FULL!
What other sights would fit this?
I'm not sure. Thank you and cheers!