Hey man I just did that yesterday, you have to lock the roof first, and before install the windshields clips you have to enter the front end under the windshield molding. and everything goes really smooth.
theres water on the carpet near the doors on one side of the car, no sign of leak in roof or ceiling, seems to be coming from under the plastic covering on bottom of the door, could this be from the roof molding as one of the clips on top of the car is popped out
The video I needed! Thanks man! one thing, could you please share the part numbers? I couldn't find them in the description and really need to change the molds to my 8th gen NM, found them in the comments below THX!
Hi, I want to replace mine as well but when I try looking the product up the picture it displays is different. My rubber pieces on the side of my front windshield flew off while driving down the freeway. Do you mind sharing a direct link where I can purchase this?
@@fastgbody What did you end up having to do go get that molding above the windshield in? Also did you encounter any problems getting the old molding out?
Hey man I just did that yesterday, you have to lock the roof first, and before install the windshields clips you have to enter the front end under the windshield molding. and everything goes really smooth.
Thanks for the tip, I’m going to this soon and appreciate your wisdom.
What’s the part numbers? I don’t see them in the description
73158-SNA-013 / 73168-SNA-013
I was thinking same thing!
Hi may I check can I replace the roof top center molding without removing the windscreen?
Thought this was a 10 year old video then I got the corona reference haha, thanks for this!
Lol. No problem
@fastgbody Where did you buy the strips from, along with the clips? Thx for the help and great video
Where did you get those parts, and for how much did you get it?
Thank you very much for this video. It was a life saver helping me get this done on my car.
theres water on the carpet near the doors on one side of the car, no sign of leak in roof or ceiling, seems to be coming from under the plastic covering on bottom of the door, could this be from the roof molding as one of the clips on top of the car is popped out
How did you get the top windshield molding in I’m wanting to replace mine just not sure how to do it
The video I needed!
Thanks man!
one thing, could you please share the part numbers?
I couldn't find them in the description and really need to change the molds to my 8th gen
NM, found them in the comments below
THX!
How do you take the old ones off without breaking those clips?
Hey great video where did you get that weather strip needed help thanks men...
I have Honda Civic 2008
There are no part nos description ☹️
Hi, I want to replace mine as well but when I try looking the product up the picture it displays is different. My rubber pieces on the side of my front windshield flew off while driving down the freeway. Do you mind sharing a direct link where I can purchase this?
I just need to replace my passengers side. So is the passenger side considered as the “left” or “right” for when I order the part?
Good question. From what I’m told it’s described as sitting in the drivers seat. Left is driver right is passenger
Where can I find Ceiling molding
Where is part information?
Nice video I thought they put my windshield all in ward lol thanks for the advice
Good job.
How much do they cost?
My 08 needs them for years now.
I got them for around $220 from the dealer
@@fastgbody Thanks
Link where can I buy?
Nice video but I came her to see how to remove and fit the molding above the windshield. How was that done ?
That is not fun. It basically needs to be glued back in. I will do it one day but for now it’s just popped in
Having issues finding one's for coupes.
whats the part number on the rubber molding on the top in the beginning of the video??? and also did you buy new clips???
Yes I had to buy new clips. It’s almost impossible to get the new upper windshield molding on with the windshield in though
Hello boys , what this price $$ this pieces?
Does anyone know where I can buy the side drip molding? The dealership in my area wants $$$.
I believe the molding above the windshield needs to be installed when the glass is set.
I ended up getting it but it isn’t fun. Took some patience and brains but I did get it finally
@@fastgbody What did you end up having to do go get that molding above the windshield in? Also did you encounter any problems getting the old molding out?
73158-SNA-013 and 73168-SNA-013 - Where can I get those? Any online link would help.... I found it in 1 site and the delivery cost was around 240+ :(
Local Honda dealer
Where did you get the wing and how did you get one color matched ?
It was eBay and they preprinted it
Where can I order this
what are part numbers? I need to do this badly EDIT NM found them below
No problem glad if helps
is it the same thing for the coupe
Yes but different part numbers
This should have been a re-call. All Honda that I've seen have this problem under 100k miles.
It was rather pricey to fix as well. I mean not to bad but still
@@fastgbody I went last week to the dealer for this, they want $850 for replace both sides. Insane!!
Min hit 300k then this happened on one side
Well lucky me for living in 3rd world country, it only cost me $120 for both sides.
Does anyone know where I can buy the side molding
Which side molding ?
Hi, I need the part number of the clips. Thanks
I will try to find my paperwork and get those numbers for you
Ditto
Guess no one got the numbers
Where can i buy it that pieces?
I’ll get you the part numbers. I went to Honda and got them
@@fastgbody thanks i appreciate!!
73158-SNA-013 and 73168-SNA-013
@@fastgbody but dosen't matter if my honda is LX?
As long as it’s 06-11 civic 4 door sedan no
Noice 🍻