RIPP Supercharger Kits For 3.6L V6 RAM 1500
HTML-код
- Опубликовано: 29 сен 2024
- rippmods.com/c...
The RAM V6 is a lot of truck for the money but there's no hiding that this vehicle's 3.6L V6 Pentastar engine still lacks overall horsepower. This lack of power becomes even more noticeable when towing, off-roading, or even just by adding some bigger tires. RIPP Superchargers now has a complete bolt on solution for you. This supercharger kit includes all of the necessary hardware and electronic components to install into your vehicle in under 9 hours. As tested on our Dyno Dynamics Dynamometer the factory V6 Ram makes a measly 260 horsepower at the wheels. After installing the supercharger power output is raised to *442HP & 410ft/lbs of torque at the rear wheels! That's a 182hp GAIN!, You'll have more power then a 5.7L or 6.4L Hemi V8 and retain a respectable mpg for daily use.
This kit is designed to perform check-engine-light free with all emissions and knock control features active, making it the most reliable V6 RAM Supercharger kit available. All this is done on a completely factory engine and drivetrain without any internal modifications required. This new-found power will make all aspects of owning your V6 RAM better, including but not limited to; towing, off-roading, camping, soccer practice, and tailgating. Okay we're not really sure how it'll make the last two better, but now you have a supercharger! So load up that trailer! Pile in, and show your friends how cool your supercharged Ram is!
PLEASE SELECT YOUR VEHICLES YEAR IN THE DROP DOWN MENU.
What's included:
Vortech V3 Si Trim Supercharger (Self Contained and Helical-cut gears)
PCM unlock service. (Only applies to 2015+ vehicles.) (use drop down menu)
Vortech maxflow Bypass valve / blow off valve
High boost PCV valve
Idler pulleys
Plug and Play Fuel Injectors (FIC)
2.25-2.5" Mandrel bent aluminum charge pipes
HP-Tuners Mvip2 - (RIPP tune included)
RIPP MAP sensor
Pre- assembled Mounting Brackets and hardware
Gates Belt
RIPP Custom Air Filter
All necessary Hardware
4 Ply Black Couplers and clamps
Vacuum lines, Vacuum T and fittings
Zipties
Fully Illustrated Color Instructions
1 Year Warranty
Tech line with Customer Service
All Supercharger kits come assembled and ready to bolt-on to your engine. Making installation quick and easy. This kit has an average installation time of 9 hours. Unlike other brands the RIPP Supercharger comes pre-assembled ready to bolt-on to your engine. 
Авто/Мото
RAM RAM RAM RAM RAM!!!!!!! 😅Take notes V6 can Handle 400HP+ supercharged....
Any words on the 3rd gen v6 durango????
Should you continue using 87-octane gas, or is it necessary to switch to 91-octane?
Great question, we get it a lot, that's why it made it to our top ten video. The short answer in 91oct for boost, but you will get better MPG. ruclips.net/video/ZS2yF9dAkkU/видео.htmlsi=wfDksiO43oREtvkP
will this work with my 2022 big horn?
This is for 4th gen RAM V6 1500 2021 is currently supported - but not 2022
I would absolutely love to try a RIPP supercharger. I just picked up a new 2023 Ram 1500 classic express, night edition as my new daily driver and weekend SXS hauler. I love the truck, but i came from a 3500 Cummins diesel .. lol. huge difference, so im always wanting that little extra HP and torque to crest hills, pass other vehicles and avoid gear hunting while hauling. Your product looks great.
What place in Canada does this type of work on the east side I love to get all that power outta my truck Or just to get the power outta this truck how much is the parts for a 21 classic same 3.6
Ill be ordering very soon, for a 2022 warlock. Stupid excited.
I was so excited throughout the whole video. I went from a 5.7 hemi to a 3.6l v6 and need more power but towards the end you mentioned the one I just picked up… the eTorque. Smh. Hopefully something comes out for it soon.
Anxiously awaiting the WK kit! And I went Magnaflow with custom piping for a total of $417. Anyone with the knowledge wouldn’t buy a prefab exhaust kit…just saying.
Next kit coming
If yall want to use my 2019 eam 3.6 warlock as a test vehicle I would gladly let you put one on my truck
This is a completed system which has been available for purchase since May 2020. If you are interested in purchasing one please check out www.rippmods.com.
Is there a way you could have an option for us 5th gen owners to pay like $1000 from us so you can start working on testing and tuning then when the kits come out we just pay the rest? Just a thought I would love to have one on my 5th gen
Glad to see how well Ross’s business has grown over the years. Still remember his Audi..
I have a '15 3.6L. Are there any diagrams and or pictures of the finished installed product in other trucks available to view?
I jus got a new 2022 ram classic warlock with the 3.6L I didn’t see a kit for it on the site but most parts I find are compatible with the 2019s and newer. Is there a kit for a2022?
Thank you for the comment, we do not have a kit currently built for the RAM 2022 models, but we do have it on the list of ones to make. No current ETA for start.
Would this work on my 2025 1500 big horn truck 3.6 pentastar where can i order one
Hi @cavertgreen15
We do not currently offer supercharger kits for 2025 1500 Big Horn 3.6L Pentastar, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
Will this kit come out soon for the 3.6L newer Jeep GC models?
Do u work with any body in Canada that can do the work to get all that power with the kit idk
Does this work for a 2017 3.6l v6 tradesmen?
Hello @sloowsid2708,
We do not currently offer supercharger 2017 3.6L V6 Tradesmen, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
Has there been very many with the 3.21 rear gear ratio? I'm waiting for the 22 year to get the green light.
The best people to contact for this are gear manufactures like Richmond, Yukon or Nitro Gears. They can help you properly source the correct gear for your set up.
So I have a warlock with a hemi air box and RAM air adapter. Is there any way to incorporate that with the super charger kit, Plus also a hemi throttle body
You can certainly adapt the supercharger to use a factory airbox by having a pipe fabricated for it. That said the airbox would be a restriction in comparison to the large open air filter provided with the kit.
I would love this for my 2021 but I got no idea how to put this in
Hello @Pogchompers
Of course. Our kit comes with instructions for installation, though we do recommend that you bring it to an installer that you trust for the installation and tuning, and if they have any questions, they can always contact us through email or through our phone lines. If you have any additional questions, or need more clarification, please email RIPPmods@RIPPmods.com, we will gladly help you there.
Very informative!
I have the Laramie 3.6L V6 if you want to test them superchargers out
This is a completed system which has been available for purchase since May 2020. If you are interested in purchasing one please check out www.rippmods.com.
BUMMER. I have the 19 Ram eTorque design..Was getting my hopes up but I will have to trade in for a v8
Can you guys make a kit for v8 5.7 hemi ram 1500
Is this setup for 91 octane or 93
91 octane
Im wondering why i will superchar my pentastar while the transmission are so wick ? Yes i have been replaced 2 transmission already 2015 durango and unbelievable 2021 gt model
We have had 0 transmission problems to date ourselves and no more than 5 noted to us from customers over the course of 10,000 kits sold. This RAM regularly tows a car and open trailer regularly.
I have a 2009 Ram 1500 with the 3.6; is this the same engine? We just had to rebuild mine at 91,000 miles due to valve seating issue (which I hear is typical for this engine)
I’m thinking maybe I don’t have a Pentastar since you spoke highly of it
It’s the same 3.6 but the newer ones don’t have the valve seat issues or head issues.
I want someone to contact me about prices and demand because I want the same project on my car 2022 v6
Please email RIPPmods@RIPPmods.com with that question, they should be able to help them there.
I have a 2021 Durango RT you guys have a kit for a Hemi 5.7?
We have kits for Durango's on our site www.rippmods.com
Won't this eat up the transmission that comes with the 3.6l pentastar?
Not at all. The majority of our 10,000+kits are on the 8spd and it not only handles the power without problems but this Ram also tows very often.
@@RIPPMODS good to hear I haul a camper with my stock pentastar but I would like to have a bit more power to it as I haul
Will this fit on the new generation 3.6l?
@@logankollatt2857 no because of the etorque
I purchased the set of coils and laser iridium spark plugs for my 2015 ram 1500 3.6l on August. Installed them and this month I got a misfire code for cylinder 1 the mechanic came and tested everything, out of the 6 got 1 bad coil.
Hello, sorry to hear that, they are under warranty, email sales@rippmods.com with an explanation and your order number and they will send you procedures. You can run one OE coil to replace the misfiring one in the interim.
can this be used on a 2022 Ram 1500 Warlock V6?
Yes email sales@rippmods.com for more information
@@RIPPMODS Thanks for the reply!
Is there a supercharger kit for 2019 Durango yet?
Is there one available for a 2022 3.6 with etourque
Hello, this was covered in detail at 19:05
Is this still a real thing? Last time I looked I saw no buy link… I want this.
Thank you for commenting, here is the link for purchase of all of our ram products. rippmods.com/collections/dodge-ram
Will the wk kit support the 2020 durango as well?
@rippsuperchargers will this work on 22 ram 3.6
It is compatible with 2022 Ram Classic models. It will not fit the new body style 5th gen Ram.
Why do the auto manufacturers never use this type of supercharger????
Its expensive and its easier to package the top mounted compressor for the OE's. But many high-end car companies have used it like BMW Alpina and Koenigsegg also Scion came with one too a few years back.
Does it come with a boost gauge??
Is their one for purchase?
No, but there is really no need, the supercharger is belt driven so you never have to worry about over boosting like a turbo ruclips.net/video/ZS2yF9dAkkU/видео.html check out this vid, it covers this question and a few others -
@@bigabe43 we don't even sell them because we really don't need them
Would this kit work for a 2022 Ram warlock V6?
We do not have software support from HP Tuners to tune 2022 RAM models yet but the kit itself does fit. Once tuning support is available our website will be updated to show 2022 compatibility.
Is there a video of them being installed in a ram?
We do not have any video installs of this vehicle.
Have you ever run more boost or are the 3.6l Pentastars only safe at 11psi or less?
Thank you for the comment. We have run all types of boost pressure. It really depends on how much horsepower you are aiming for, what horsepower are you aiming for?
@RIPPMODS I'm more concerned about Cylinder pressure. Not what it makes to the wheels. If I boost it to 12-15psi I'm sure that would hurt the engine, what do you think?
@@UPerformace 15psi will make some great HP numbers, about 500+hp. I'd look into upgrading headgasket and head studs at that point. Our standard set-up will not require any upgraded internals. Boost levels will maintain a safe environment even for everyday use.
You should do one with 4th gen hemi ram and your coil packs
Hello @ChrisDeVary
We do not currently exclusively have coils for a 4th gen Hemi Ram, we do have plenty of things in R&D. Please contact RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
@RIPPMODS I have a pair of your coil packs in my 2017 ram 1500 5.7l hemi right now just wanted to see dyno specs I live nowhere near a place woth a dyno but I have noticed a significant throttle response and 1mpg gain but not sure on the wheel horsepower
@@ChrisDeVary In accordance to our testing, there is about a 20 WHP increase on those engines. If you have any additional questions, please email RIPPmods@RIPPmods.com, we will gladly help you there.
😍😍😍😍
Awesome stuff👍👍
I need a supercharger kit for a 2018 Dodge Journey GT
We do not support FWD unfortunately not enough room.
😳 you CANNOT be serious 🧐 😆 😂 🤣 🤮
@@RIPPMODS it’s AWD tho
@@Whatkindacheeseisntyours lmao you can’t avoid toxic car community 😴 what’s your point replying to that, your comment serves no purpose 😂 respect all builds Bozzo
@@thomaskuerzi901 yes, but the engine is transverse and we do not support the layout as there is no room to mount the supercharger.
I wonder if they can do 4cy Honda accords
We do not currently support Accord, we have our first Honda product coming this fall for a Civic Type R
@@RIPPMODS sounds great
Are you going to make a kit for the etorque V6?
Thank you for commenting. We haven't started development on that vehicle. There is no eta right now, but we plan on it in the future.
Is there more mods for 2020 Ram 1500 3.6l it’s not a etorque?
@@kingkiko4263 rippmods.myshopify.com/products/2019-2020-ram-1500-classic-warlock-3-6l-v6-supercharger-system?_pos=7&_sid=4a66e229a&_ss=r
@@kingkiko4263 Ya if you google Ram V6 supercharger you'll find a couple people and companies that are doing it/selling it. As long as it isn't etorque.
Have anything for 5th gen?
Hello @logankollatt2857
We do not currently offer supercharger kits for any 5th Gen vehicles, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
@RIPPMODS Thank you, also is it not a good idea to put a turbo on a engine with high mileage? Around 100k
@@logankollatt2857 There is no issue with putting a supercharger on a high mileage engine. We have a few tests that we recommend to run on your engine, please contact tech@RIPPmods.com for more specifics.
So this should fit the 2017 Durango GT?
It will not. That kit is in the pipeline for development.
@@RIPPMODS ok please asap when it’s completed
@@RIPPMODS on a different note when the supercharger is installed do you replace/upgrade the throttle body?
@@jondoe8474 No, the throttle body does not need to be changed.
@@RIPPMODS ok thanks again . So its not a benefit if I replace it before.
Why do you guys advertise 16psi but the V6 can only handle 11-12psi which is 140hp
We do not advertise any of our kits to make 16psi. This RIPP kit is designed to produce up to 12psi which it does. At 12psi this vehicle gains 182hp. There is more involved in a final power figure than a standard boost-hp calculation.