6 Ways to Finish Your Weaving | Twining, fringe, and more

Поделиться
HTML-код
  • Опубликовано: 4 сен 2024
  • Here are 6 ways to finish weaving and hang it up.
    You can find a written guide on the Fibers and Design website:
    fibersanddesign...
    Here are the important timestamps of the video to make it easier to find which methods you would like to see.
    00:50 Method1: Add fringe to warp ends
    3:00 Twining edge
    03:35 Take warp off loom
    04:00 Method 2: Tie the warp ends off
    08:15 Method 3: Send in warp yarns into weaving
    11:30 Clean the back of the tapestry
    12:09 Twining vs. No Twining edge
    12:27 Method 4: Twined edge and simply hang up
    14:20 Calculating warp waste
    16:18 Method 5: Tie loose warp ends onto a rod
    16:30 Securing top ends with twining and bottom ends with hemstitch
    22:46 Method 6: Tie new yarn onto a rod
    You can find the Beginner Frame Loom Weaver's Guide on the Fibers and Design website: fibersanddesign...
    Weaving Tools Resource: fibersanddesig...
    Don’t know where to start with weaving or need supplies? Fibers and Design’s Weaving Tools page is dedicated to all things tools for weaving- from building your loom to the yarns for creating your designs.
    Music credit:
    Ikson "Up here (chill beat)"
    Thank you so much for watching!

Комментарии • 28

  •  4 месяца назад

    You have taught me more in the 4 videos I have watched so far than I have learned in 3 weeks of other videos. Thank you so much for spending all this time for us novice weavers!

  • @thesci-fibro5835
    @thesci-fibro5835 3 года назад +3

    This is ridiculous... You're SOO underrated, like wth? These are some really high quality videos and all of them are free, I really hope the algorithm booms your videos up

  • @angelarae63
    @angelarae63 4 года назад +6

    Just what I have been looking for! Now I have several ways to finish my little weavings! Thanks so much!:0)

    • @fibersanddesignweaving
      @fibersanddesignweaving  4 года назад

      Glad to help! I am really happy that these tips helped you :) Thanks for watching!

  • @vanessaisom8620
    @vanessaisom8620 3 года назад +4

    Thank you for this tutorial, it was so helpful. I love weaving, but finishing off I always get nervous about. I have a fairly large weaving ready to come off the loom, but I think I will practice these techniques on small pieces first, to gain confidence. The large piece is for a prominent place in my home, so I want it to look good. Thanks again.

  • @marzannaw6797
    @marzannaw6797 Год назад

    The best tutorial I've found ! Thank you a lot

  • @lilliandsouza4577
    @lilliandsouza4577 3 года назад +1

    Thank you for this! I love all your videos and find them so helpful to refine my technique!

    • @fibersanddesignweaving
      @fibersanddesignweaving  3 года назад +1

      Hi Lillian! I am happy to hear that the tutorial is helpful ! Thank you for watching :)

  • @MarianaBorges-hy7kp
    @MarianaBorges-hy7kp 3 года назад

    You are awesome. I was searching for some tutorial like this one for days hahah thank you so much!!!

  • @sarahhelene5527
    @sarahhelene5527 3 года назад

    Hi!!! Great video. Thanks so much for explaining everything so thoroughly. Could you let me know what loom you are using and what cotton yarn you prefer to working with? Thanks so much!

  • @aislinn9261
    @aislinn9261 4 года назад +4

    This was such a great tutorial - thank you so much!! Can the last technique be used for bigger weavings in your opinion? I don’t want to make my weaving as long as my loom as I think I made it too big!

    • @fibersanddesignweaving
      @fibersanddesignweaving  4 года назад +2

      Hello! Thank you for that great question! You know, I also struggle with that sometimes too. I think that it really depends on the weight of the piece and the materials used.
      In this tutorial, the warp and weft (and added yarn) were the same color, so they didn't have any problem "blending". Also, this piece was also small and didn't weigh much. So it worked well- however, I have tried this with larger pieces and I didn't like the result so much. The area where you add the new yarn tend to have a gap, and I didn't really like that.
      It is a bit of trial and error- but in my experience, when weaving a larger piece, I try to calculate how much warp to save for the hanging section ("warp waste") and choose a warp color that fits the piece. I tend to use the remaining warp to hang pieces (esp the larger ones).
      I hope this helps! If you have any further questions, please ask :)

    • @aislinn9261
      @aislinn9261 4 года назад +2

      Fibers and Design Weaving thank you that’s really helpful! I think I might try the warp waste technique then just to be extra careful!

  • @jenniferbrighty5120
    @jenniferbrighty5120 4 года назад +2

    Hi, Gina I love your video tutorials. I have a question, do you weave from the top down and is it easier than weaving bottom up?
    Thankyou for all the ways to finish the weavings.
    Jen

    • @fibersanddesignweaving
      @fibersanddesignweaving  3 года назад +1

      Good Question Jen! Well, it varies...I usually weave from the bottom up, but other times a design may change and I continue the design in another way. But, in regards to building the design, usually the design is created under the hands. How do you like to create your designs?

  • @constanzaespinozagomez9932
    @constanzaespinozagomez9932 4 года назад +1

    Justo estaba buscando sobre esto! ❤️ In spanish pleaseee

    • @fibersanddesignweaving
      @fibersanddesignweaving  4 года назад +1

      Happy to help! I hope to have the tutorials available in various languages in the future :) Thanks again for watching :)

    • @constanzaespinozagomez9932
      @constanzaespinozagomez9932 4 года назад

      @@fibersanddesignweaving Te he enviado un mail titulado "Preguntas". Espero lo puedas respondas. You are great! Saludos

  • @ziggiezag938
    @ziggiezag938 4 года назад +2

    On that last one, couldn't you have taken the wrap back to the middle and done the odd loop there and had more yarn to weave in the end?

    • @fibersanddesignweaving
      @fibersanddesignweaving  4 года назад +3

      Right! :) Just like I did in 16:18 . I wanted to show a few variations in the tutorial :)

  • @sapkarian
    @sapkarian 3 года назад

    Your tutorials are so great, thank you! One suggestion: please use yarn that has more contrast with the surface you are filming on so it is easier to see. This is hard on the eyes!

  • @JanisGagliardi
    @JanisGagliardi 3 года назад

    What type of warp string do you use? I like the look for fringe!

  • @joolzable
    @joolzable 4 года назад +2

    How did u attached the pom-poms above that?

    • @fibersanddesignweaving
      @fibersanddesignweaving  4 года назад +2

      Hello! The pom-poms forms are created with short rya knots. After the rya knots are added, cut them down to form this pom-pom shape. Hope this helps!

  • @miancuarts
    @miancuarts 2 года назад

    What kind of loom frame are you using?

  • @sahrakunoow8918
    @sahrakunoow8918 11 месяцев назад

    haujui kitu kwenda zako

  • @elisaumoso6198
    @elisaumoso6198 Год назад

    where to buy materials c.o.d

  • @miriammorales5683
    @miriammorales5683 3 года назад

    Thank you for your tutorials. They are clear and useful. However, this one is too long and too slow. Hard to finish it. It would be so much nicer to have six short videos, one for each method, so as to easily find our favorite one and see it as often as necessary.