Love those keycaps on this board. I don't see Tai-Hao getting enough use even though the thin keycaps bring out the unique sound of the boards they're on. Good combination on this one.
@@brettcloud8550 I found a picture of the V1 layout and seems like it is a 6.25 here's the link: ucarecdn.com/e37f8d1a-4f1e-43ef-a049-ab7420248af6~1/nth/0/-/format/auto/-/quality/lighter/-/stretch/off/-/resize/648x/-/format/auto/-/quality/lighter/
@SHAGGY OW Nice! I dont know what I'm going to be putting in mine. If they only have a brass plate at launch, I'm putting in my glorious pandas. If they actually manage to make a polycarb plate for it, I'm putting my inks in there. Not sure about caps. I'm pretty close to going in on the kat crusader gb. Was tempted to go into gmk awaken, but I think I'm going to wait for dots v2. Will probably just throw on one of my cheaper pbt sets until my preferred caps arrive.
@SHAGGY OW yes! Shansui didnt wow me as much, but avanguardia is very cool. I have a portico coming in the next couple months as well. That one comes with an fr4 plate. I've got some everglide dark jades lined up for that thing. If they have an fr4 plate for the gmmk pro the everglide might go in there.
We’re the switches really snug when you install them? When placing my black ink switches it was very tight but I did make sure everything is aligned perfectly and there was not bent pins.
Hi, Cool video I'm currently in the market for a new keyboard and I'm looking at this one (ID80v2) or KBD67 lite. What is the better keyboard between these 2? I don't mind the difference in layout. ID80v2 is 90usd more but I would need to wait a minimum of 3 months for the KBD67 Lite. Any advice would be appreciated : )
Hmmm... the KBD67 Lite is the safe choice as the extra thick integrated plate of the ID80v2 is not be for everyone. But if you don't mind having a harsh... OK wrong word, I meant extra firm typing experience, then give the ID80v2 a try. :)
@@FIZOdigital Awesome, thanks for the answer. Looked into it a bit more and I think I will go with the KBD67 since it's gasket mounted and I never tried Keyboard with this type of mounting. Also, I'm picking up some c3 tangerines that are dropping today. Now all I need is some keycaps and my build will be finished (except I will have to wait 3 months to get it lol)
Hey! I don't know if you built one already. It's has already been a month haha. If so haven't done so or would like to build another one, KBDFans currently has the KBD67 Lite instock. A budget, gasket mount board + hotswap, etc etc. Check it out. It'll run you about a hundred bucks.
Kung mas type mo yung super tactile and super sharp yung tactile bump niya, go for Dark Jades. If you are after a rounder tactile bump and sakto lang ang tactility get the holy panda. :)
Unfortunately, Idobao only sells barebones kit. Perhaps you can check KBDFANS, they have Fully assembled kits (kbdfans.com/collections/fully-assembled-keyboard)
@SHAGGY OW yeah fuck i guess ill just throw the pre-order in right now for my xmas gift to myself =D its fancy looking AF, just need to find the tactile beasts i want, been looking at them yok purple trash pandas
@SHAGGY OW im coming from gat browns so be easy on that review lol. I just want a tactile switch that isnt too loud. obviously the board will play a big part, but im not gonna be lubing and taking apart each switch and what not. I aint got the patience for that. But then again i dont want to pay $100 in some zealios
@@BlueManatee they are sold as Add Ons, if you check shop.tai-hao.com/products/abs-104-c01gy303 the base set contains 104 keys, in order for it to be compatible with the ID80 you need to get the 1.5U Alt+1.5U Ctrl as well as the 1.75U Shift add-on keys. HTH :)
I don't own a Tofu, so I can't do the comparison, sorry. Anyway, I think the ID80 is painted white and not electrophoresis. So the e-white should be better. But never the less, the finish of the ID80v2 is acceptable specially for its price.
I like this combination, integrated plate and dark jade would provide super duper tactile feedback right?
great video, I just bought the v2 veresion of this in black
Subbed. Fuckin dig this board 💯
Dude that sounds clean af. I just ordered mine I'm so excited omg.
Love those keycaps on this board. I don't see Tai-Hao getting enough use even though the thin keycaps bring out the unique sound of the boards they're on. Good combination on this one.
love the beat you did on individual keys haha
Total dimensions of this keyboard?
how long did it take to ship?
Did you lube the wire of the stabs
Great video. It's detailed and shows your work process. Nice!
you did not change the hollow case. rest is awesome!
Awesome combo of the board with the xtrfy m4 I see you are a man of exquisite tastes.
bro buy Durock stabilizers it is wayyy better
Agree, Durock stabilizers are really great! In-fact their switches are great as well. :)
Its less hollow than v1 the acrylic helps it.
Is there a function key? I love this board and I’m waiting on mine to arrive.
has it arrived if yes is it good?
I wouldn't think so because it has a dedicated F key row?
A little hollowness ?! I love it, V2s are a nice upgrade i can see from the V1s
yh there is quite a bit of hollowness
For the stabs, is the spacebar 6.25?
I'd like to know this as well.
@@brettcloud8550 I found a picture of the V1 layout and seems like it is a 6.25
here's the link: ucarecdn.com/e37f8d1a-4f1e-43ef-a049-ab7420248af6~1/nth/0/-/format/auto/-/quality/lighter/-/stretch/off/-/resize/648x/-/format/auto/-/quality/lighter/
Just found the answer, it is indeed 6.25.
ID80 V2 or KBD Fans 75% board v2?
If you haven't gotten either one yet, don't sleep on the upcoming GMMK Pro.
@SHAGGY OW Nice! I dont know what I'm going to be putting in mine. If they only have a brass plate at launch, I'm putting in my glorious pandas. If they actually manage to make a polycarb plate for it, I'm putting my inks in there.
Not sure about caps. I'm pretty close to going in on the kat crusader gb. Was tempted to go into gmk awaken, but I think I'm going to wait for dots v2. Will probably just throw on one of my cheaper pbt sets until my preferred caps arrive.
@SHAGGY OW yes! Shansui didnt wow me as much, but avanguardia is very cool.
I have a portico coming in the next couple months as well. That one comes with an fr4 plate. I've got some everglide dark jades lined up for that thing. If they have an fr4 plate for the gmmk pro the everglide might go in there.
Soliiiiid!
bro buy Durock stabilizers it is wayyy better
have you tried doing tape mod on this board? if so, how was it?
hi sir ask ko lang pano niyo naalis yung acrylic bottom. hirap tanggalin nung akin eh hahaha
We’re the switches really snug when you install them? When placing my black ink switches it was very tight but I did make sure everything is aligned perfectly and there was not bent pins.
Gateron Black Inks are really tight/snug fitting switches.
good job
Thanks
Hi, Cool video I'm currently in the market for a new keyboard and I'm looking at this one (ID80v2) or KBD67 lite. What is the better keyboard between these 2? I don't mind the difference in layout. ID80v2 is 90usd more but I would need to wait a minimum of 3 months for the KBD67 Lite. Any advice would be appreciated : )
Hmmm... the KBD67 Lite is the safe choice as the extra thick integrated plate of the ID80v2 is not be for everyone. But if you don't mind having a harsh... OK wrong word, I meant extra firm typing experience, then give the ID80v2 a try. :)
@@FIZOdigital Awesome, thanks for the answer. Looked into it a bit more and I think I will go with the KBD67 since it's gasket mounted and I never tried Keyboard with this type of mounting. Also, I'm picking up some c3 tangerines that are dropping today. Now all I need is some keycaps and my build will be finished (except I will have to wait 3 months to get it lol)
Which is best gmmk pro or this ?
Is this worth it over the first version?
Great Video! Im also trying to get started with building keyboards. Do you have any tips?
Hey! I don't know if you built one already. It's has already been a month haha. If so haven't done so or would like to build another one, KBDFans currently has the KBD67 Lite instock. A budget, gasket mount board + hotswap, etc etc. Check it out. It'll run you about a hundred bucks.
ask lang po na compare mo na ba ito sir sa holy panda ano mas better sa dalawa ?? yung dark jade ba or holy panda
Kung mas type mo yung super tactile and super sharp yung tactile bump niya, go for Dark Jades. If you are after a rounder tactile bump and sakto lang ang tactility get the holy panda. :)
Where did you get the lubestation from?
Got it from KBDFans. kbdfans.com/collections/lube-tools/products/kbdfans-switches-lube-station
Anywhere to buy these keybords assembeld?
Unfortunately, Idobao only sells barebones kit. Perhaps you can check KBDFANS, they have Fully assembled kits (kbdfans.com/collections/fully-assembled-keyboard)
theres no light on capslock?
I didn't notice, but the keyboard has white backlight leds, but its turned off on the video. :)
How are the keycaps does it shine quickly?
The key caps are good, a bit thin in terms of construction but I haven't use it long enough for it to shine. :)
Thanks. I was thinking if I should get a high end ABS or average PBT instead.
I love it!!
When did this arrive to you?
I got mine 1st week of Dec 2020
What size stabs did you use?
I'm not really sure what you mean by stabs size. If are you asking about the space bar stabs size? Its 6.25U. :)
shiiiiit, now i really wanna just get this instead of GMMK pro. i wanna know how that quality is =(
@SHAGGY OW but by then itll be like 4/5 months until i even get my hands on it, ya know?
@SHAGGY OW yeah fuck i guess ill just throw the pre-order in right now for my xmas gift to myself =D its fancy looking AF, just need to find the tactile beasts i want, been looking at them yok purple trash pandas
@SHAGGY OW im coming from gat browns so be easy on that review lol. I just want a tactile switch that isnt too loud. obviously the board will play a big part, but im not gonna be lubing and taking apart each switch and what not. I aint got the patience for that. But then again i dont want to pay $100 in some zealios
@@PaulSanz63 Check out the Boba U4 if you want a silent tactile. They perform similar to zilents for way less per switch.
@@jorgeh4591 Thanks for the comment ma dude, will def check it out!!!
did you have to order any extra keys with this or just the base set?
Are you asking about the keycaps? Yes, I had to order extra 1.75u shift key and 1.5u Alt and Ctrl keys. As the Tai-hao base kit does not include them.
@@FIZOdigital which set includes the 1.5 alt and ctrl
@@BlueManatee they are sold as Add Ons, if you check shop.tai-hao.com/products/abs-104-c01gy303
the base set contains 104 keys, in order for it to be compatible with the ID80 you need to get the 1.5U Alt+1.5U Ctrl as well as the 1.75U Shift add-on keys. HTH :)
Anong camera gamit mo? Haha
Phone lang gamit ko.
Nice build bro! How's the quality of the white aluminum? Is it comparable to the E-White of Tofu? Thanks in advance!
I don't own a Tofu, so I can't do the comparison, sorry. Anyway, I think the ID80 is painted white and not electrophoresis. So the e-white should be better. But never the less, the finish of the ID80v2 is acceptable specially for its price.
ido80 matte texture, tofu glossy
Thanks for the info!