How to Install Jeep Wrangler Fenders - Tutorial
HTML-код
- Опубликовано: 24 авг 2024
- In this video, I will be showing you how to install a set of Rough Country front and rear fenders on my 2014 Jeep Wrangler Unlimited. I hope you enjoy this tutorial installation video!
RC Jeep Fenders - goo.gl/YN2PDi & goo.gl/rQ3U3V
AdventureDex T-shirt - goo.gl/Xugwbd
www.adventuredexonline.com
My Jeep Build List - amzn.to/2AwJHCc
Camera Used: amzn.to/2ngtL3W
Thanks for watching!!
Follow me on Social Media
Facebook - adventuredex
Twitter - adventuredex
Instagram - adventuredex
Special Thanks to Rough Country
Best fender install video I've seen on youtube.
What did you do with the amber side light and its wires?
I think it looks great, I get my jeep wrangler in 4 days. I'm so happy to join the jeep community and start hooking it up. Thank you for inspiring me.
🙌🏼🙌🏼🙌🏼🙌🏼 Thanks! Congratulations on our Jeep!
Thanks, Dex! I had someone hit my Jeep and found the fender in the street next to it, run over and cracked in a few pieces. I appreciate the quality how to videos. Keep them coming!
Get the inner fenders too. They look and fit great
Thanks clay! They are coming soon!
Nice everything rough country makes seems to be top notch
Thanks! RC is great for accessories. I am not 100% sold on their lifts but love their LED's and accessories like these fenders!
Great look can't wait until you add those inner liner fender you showed in your video!!!!
Thanks bro! Stay tuned!!
Love the flat fenders. Not a fan of the rubber going between the fender and the flares. I personally am going with MetalCloak fenders. They actually reinforce the fender to the point you can stand on them.
Thanks for sharing!
Thanks again and I look and let me tell me and I'll send it to you in the morning and then I will ge t@@adventuredex I
Not a fan of RC, but thank you for your honest review. They look pretty good.
Thanks Ray! One thing you can always count on is getting the good, the bad and the ugly. No bullshit on this channel! Thanks for watching!
AdventureDex that's why I watch your videos, keeping them honest.
I installed flat fenders on today not as expensive as these but j love em. I had to use rivets on all sides though and no rubber trim..
Thanks for sharing!!
Nice video.. going to order mine today... also i will clean and spray all the white under the wheel well with spray can bed liner black.. I don’t like all that white showing... thanks!
Thank bro! I have the inner liner set as well so that will be coming next!
Excellent.... thanks!
Thanks!
Looks much better than those factory fenders 👍👍
Totally Agreed!!
I like the fenders, they look cool. I agree with you the rubber strip will not stay in place, maybe glue them on.
What I also don't like are the fact that the plastic spash guards are now also gone, water and mudd can enter the engine bay much easier. I not fond of the look under the fenders without the guards...
Thanks for the comment! Yeah the rubber piece is hard to install without help. I have inner liners that I will be installed soon!
AdventureDex then the fender install will be perfect. You just have to find a way around the rubber strip...
Yah agreed
Notification squad, I have these fenders too, I love them so much.
Thanks Ben!! I appreciate all the support!
Love god not fenders
Now it looks really nice and completed perfectly
Thanks Alan!
Im just going to keep my stock fenders for now, The winters are brutal here in Canada . It's going to keep my jeep from rusting out.
Nice! Been following your build for the longest now! My rig’s rockin paint matched (natural green pearl) JCR Off-road Mauler Narrow fenders.
Thanks for all of the support! We have come a long way!
Excellent video. Wondering if you are going to get and do a inner fender installation video. Also, what about fender lights on the front?
Thanks for the comment! Inners are coming next! The fender light was eliminated!
putting some epoxy on the inserts would help keep them in place if you ever plan to remove the fenders and put them back on.
Thanks for the suggestion!
I'm new to your channel and subscribed. Your videos are well done and helpful. Other than the angry brow, your Jeep looks great.
Dex, what do you call that kind of fenders? Please advise. Thank you!
Nice vid man! And I’m running bush waker pocket fender flares!
Nice! How do you like them?
You would think that there would be a rubber gasket running the length of the fender to sit between the metal parts. I'd be concerned about rust with these fenders. They do look sweet though
Thanks! Yea, I am not a huge fan of the rubber but it won't cause any rusting is installed properly! Thanks for watching!
Awesome work dude, they look great. Also, the Bahamas have a nice coloured license plate!
Thanks! and Yah there cool!
Do u have to install liners, or are you going to leave it like that
No link and are you not going to put fender liners on there?
Hey Dex, slightly off topic....But I notice no decal on the side of the hood. Any reason? "Adventure Dex" would be obvious. But how about "AD 2015" ? I kinda liked theme I finally associated mine with. Just a thought.
Yeah I want to have an AdventureDex one made! Thanks for watching!
Is it possible to put the rubber strip on first and then bolt the fenders to it wedging it between the fender and the jeep?
The rubber strip has no adhesive so it will just fall if it is not held in place! Its a bit of a pain but if you have a spare pair of hands its doable. Thanks for watching!
I found this helpful but I have a couple questions. 1. Installing the rivet inserts. I am doing everything by hand (no electric drill like in the video) and I just can't seem to get it to work. Any tips? 2. Do you worry about the bottom of the engine/brake line/ everything else being exposed under the front fenders? it just makes me a little nervous. Love the video though, I subbed
Just got these. I appreciate the video & will be using it for my install!
Just get the heavy duty rear bumper to put the spare tire back on.
Yah, I am planning on getting the Teraflex Hinge to mount my spare!
Hello tu conte replace les plastiques à l’intérieur de tes ailes ! Ou cela va pas fait très jolie ! Et pour les clignotants tu les place ou !
Merci beaucoup superbe j’aime beaucoup que tu fait
Je travail en France 🇫🇷 Paris
Sorry english only! Thanks for watching!
Hello. Seems these aren’t available anymore through the links you have up. Do you recall the price of them? Or the name so I can search for them? Thanks in advance!!!!
They were made by RazerAuto. You might be able to find similar style on amazon.
Could you provide the RC item number or the full description. I tried the link but it’s says it’s not available
Anyone had hole alignment
Problems with rear flares on 08 wrangler X
Thanks for the video!
Anyone know what that rubber trim is? Need it for my poison spyder fenders. Little sand pebbles get in between fender and the body and annoys me!
The video i’ve been waiting for!
Thanks!
Are you sponsored by RC? I'm assuming RC inner fender liners are next. My advice as far as nutserts go, get a pneumatic nutsert tool...worth it's weight in gold. I agree with weather stripping. Just doesn't look clean, looks tacky.
Thanks for the sharing! I am not sponsored by RC however they were kind enough to send over a set of their new fenders for review and installation. I will look into the outsert tool! Thanks for watching!
Nice! I have the similar Bushwacker fenders.
Thanks for watching!
Those look great I might have to get a set
Thanks Kyle! They are great!
Love the vid, that editing is on point
I appreciate it Anthony!!
Did you not reuse the inner fenders?
Nice video tutorial, what did you do with your side marker turn signal wire that you disconnected? Did you just tuck it away or is there a way to disconnect that cable? Thanks
They look great, what did you do with the side marker lights ?
Just zip tied them up and away for now. Thanks for watching!
What can you do when the nut inserts are loose already and they don’t stay to the Jeep
Pull them out and start over!
What about the fender lights.?
It was eliminated! Thanks for watching!
How do u feel about the grumper bumper and those heat hoods with the scoop thing sry I forgot what they are called
No a huge fan of it but that is only my opinion. Everyones Jeep is difference and thats what makes is unique and fun! Thanks for watching!
Hi what’s the name of the fender? And the cost
Great install video! I bought these fender flares to put on my 2015 JK. I’m curious... what weather stripping did you use between the flare and the body during your install? Thanks!
Forgive me if this question has been answered but what tire shine do you use
It looks good
Thanks Cody!!
I ordered a pair of decals a few weeks ago and haven't received them. How do I find out about it?
Hey Brian, I personally sent them to you however they are coming by snail by from The Bahamas. Please be patient. Thanks for the support! #jeepwave
AdventureDex , Thank you. Keep up the good work with the videos.
Awesome...look easier when you do it
LOL Movie Magic! Its not that difficult just need some common sense and patience. Thanks for watching!
Great job 👍👍😎😎😎👍👍& Great video 👍👌👌👌👍😎
Thanks!!
Where can I get the rubber for the protection?
can you stand on those fenders?
LOL not recommended! Thanks for watching!
Thanks
What grill is that, that you have on your Jeep?
So what happens to the light that was removed?
What tire shine applicator do you use?
A sponge or brush. Thanks for watching
Dude aweasome jeep its only needs a roof rack
Martin Arteagaa definitely not what it needs
Thanks for the comment! I am planning on getting one soon for camping!
Why not?? lol
Ultimate Survival it is not necessary but it would be cool one
Is that the brand?
Thank you for video
Thanks for another great video Dex! Quick off topic question, I have never lifted any of my Jeeps but I am looking to put a small lift on my 2013 Rubi. Would it be better to go with a body or suspension lift kit. I am only looking to lift it about 2 inches.
Jared Cone I'm not dex but I would look into suspension lift. I would look at teraflex or jks 2.5 in lift kit. would fit at most 35's with flat fenders.
Thanks so much for your reply, I will definitely look into that.
Thanks for the commnet! Miguel is 100% correct. I would recommend nothing other than a 2.5 Teraflex lift kit. I have installed many on my garage floor with some simple tools, jack stands and a floor jack.
Awesome, thanks Dex!
Jeeps looks great brutha
Thanks Jeff!!
What grill do you have on your jeep?
here is another question, were your tires out past the stock flares? That wouldn't fly in my neck of the woods.
Talez From the DashCam lateral stability
Huh?
I honestly don’t think any cop is gonna pull out the tape measurer for that.
oh yea i go to utah all the time and never get pulled over its fine. and wide tires are better for multiple reasons
Laws vary from state to state. That wouldn't fly in PA. Kinda like window tinting. Police look the other way most of the time until you run into one having a bad day.
Great video but the audio? What wrong with the audion or is it my phone
Is the audio bad????
At 0:13-0:24 the audio dosent sound right but the rest of the video sounds fine
Damn dude love it!!!
Thanks Andy!
what size lift and tires?
Nice
Thanks!
Sick jeep man, what size wheels u runnin?
Thanks bro! 37x20 Nitto mud grapplers 💪🏼
Anyone know what mic setup he's using?
Right now I am using rode wireless go mic
anyone know what fenders these are !!
Huh? What bout the turning lights?
Finally
:) haha yeah!
Wow $720. I think I’ll just cut my stock fenders can get the same exact look.
The same look but they will still be plastic. Thanks for watching
AdventureDex right but I’ll be $700 richer. Lol.
Haha! For real 🤣
VERY GOOD VIDEO
YOU ARE A CRACK
REGARDS
Not exactly sure what you mean but Thanks!
$700.00 for some Chinese plastic? I’ll pass
Chinese Plastic??? LOL
Dude it’s rough country, was literally made in Tennessee by hard working Americans. But anyways I’m just some guy on the internet, check em out for yourself