BetaFPV Pavo 20 Unboxing + Full Setup And Test!
HTML-код
- Опубликовано: 11 сен 2024
- Welcome to 954 Films! 🎉 In this exciting video, join us as we unbox, set up, and put to the test the incredible Betta Flight Pavo 20 drone. Get ready for an immersive journey into the world of aerial exploration!
📦 Unboxing:
Witness the unveiling of the Betta Flight Pavo 20 as we showcase every detail inside the box. From sleek design to cutting-edge features, discover what makes this drone stand out from the rest.
🔧 Setup:
Follow along as we guide you through the seamless setup process of the Betta Flight Pavo 20. Learn about its easy-to-use controls, advanced functionalities, and any additional accessories that enhance your flying experience.
🚀 Test Flight:
The moment we've all been waiting for! Watch as we take the Betta Flight Pavo 20 to the skies for a thrilling test flight. Explore its agility, stability, and impressive camera capabilities, capturing stunning aerial views like never before.
Whether you're a seasoned drone enthusiast or a beginner looking to dive into the world of UAVs, this video is your ultimate guide to the Betta Flight Pavo 20. Don't miss out on the excitement-hit that play button and let's soar together!
👍 If you find this video helpful or entertaining, don't forget to give it a thumbs up, subscribe to 954 Films for more tech adventures, and hit the notification bell to stay updated on our latest content. Let's fly high with Betta Flight Pavo 20! 🚁✨
BetaFPV offers everything you need to elevate your flight experience. Shop now and dive into the world of FPV like never before! #BetaFPV
bit.ly/4cBqDoC
could you please share the configuration dump. Thanks
Thank you for the review, really helps
I bought 2 of the Pavo20 and about to set mine as you showed
Good video. Useful info. I have very little experience with Beta Flight. The whole setup process is a bit of a mystery to me. I have the same controller and found this very helpful! Thanks for sharing!
Try watching the vid now it took all night for the vid to upload to 4k quality sorry about that
It made a big difference! Thank you!@@954Film
Like the content. By the way, I don't think the x bracket is necessary for the o3 air unit. I am pretty sure it's an adapter for installing the caddx vtx to the cradle. I think it's hole pattern is smaller compared to the o3 air unit
It might be the vista adapter I do feel like on my last Pavo I had when I didn’t use the x bracket the o3 would be a little lose
yeah its an adapter for vista's and walksnail
03 air unit wires: TX, RX, 9V, Common, Serial, and VBatt. VBatt is how your air unit knows the voltage input coming directly from the battery.👍
Great information nice one 🙌
Thanks man!!!
hi mate, just a little bit of advice concerning your goggles antennas.. i would use the stock antennas on the goggles v2 as there are omni directional just like the ones you have on the pavo20 there and as is the stock 03 antenna omni directional too so using lhcp or rhcp antennas isnt ideal unless you use 2 lhcp's and 2 rhcp's on your goggles and mix them up, i hope this helps or if you already knew then let me know:)
Yeah I needed this. Didn’t know that the DJI controller could be configured in beta flight. I can hold off on buying an elrs controller for now. Thanks for the tutorial
Yea I have yet to buy a elrs controller I have had no problems with the dji controller
same here! thanks for the great video describing how to connect it!!
exactly what i needed!
thank you
what configuration did you purchase? was it ELRS 2.4 or TBS. I have the identical setup to you, such as a dji remote and goggles.
I have the elrs setup
At 7:28 why is your throttle stick on your radio controller 🎮 is very very loosen movement??? Did you setup that way yourself or is it broken???
I recently bought a refurb controller 2 from eBay and it had the same wonky throttle stick and I think a previous owner opened it up and modified it so I sent it back and bought a new one from Amazon
To fly a fpv drone you need the throttle stick to be lose their is a screw on the back of the remote you just tighten and lossen to make the stick tight or lose
@@954Film yes I already know about making stick loose or tighten on back of radio controller, I know that. But I find that very loosen stick is not pretty good for FPV drones. It got to be between little loosen and little tighten. Have you try that? How long have you been flying FPV drones for??
@@indroneswetrust1 I have mine set right about in the middle of fully lose and fully tight I have been flying for about 2 months now I have tryed the controller in a few different configurations and I feel like a little more on the lose side works best for me
@@954Film alright no problem, everyone have their own tastes, opinions for their own FPV drones system, alright no problem. I have been flying for 9 years now since January of 2015. So yeah good short talk with you. Gotta go and have a good day and have a happy flying dude 🤙🏼😎🎮🛸
How long does it take to charge that 3s battery?
With the charger I have like 10 minutes it’s nothing.
Dude fix ur left stick/throttle, it’s messed up bro it ain’t supposed to be springy/bouncy. 👍
It’s not supposed to be tight ether
Nice Man New subscriber 🤙🏻🤙🏻
Thanks so much!
Hello, I bought a Pavo 20. Before installing O3, I was flying with 2-cell and 3-cell batteries without any problem. But after installing O3, it does not fly at all with 2-cell batteries,
and with 3-cell batteries, it flies at 90% throttle and with difficulty.
where is the problem from ?
I have a 2 cell battery : tattu 450mah 75c
and a 3 cell battery : boslipo 650mah 95c
It might have something to do with voltage and battery settings in beta flight.
how can a set the angle mode in the switch??
You have to set the flight mode switch in beta flight
Hi, i would like to add that i cant find the way to turn the lights on and off... using the exact same hardware
It is under uart1 or user 1 in the controls you just have to assign it
so sorry again... i cannot find user 1 in my betaflight... and aux 1 ia already my arm switch... i dont know how to control my LED.. is there any way i could pass you my number? or we find a more eficient way of comunicating?
Yea send me a email at 954films19@gmail.com
Hi, could you please make it clearer which uarts you have open? Because the vid is too low quality for me to see... i fly the exact same setup, thankyou
It comes with uart 3 open you want to close that and open uart 5 and turn on vtxmsp on and leave everything else the way that it was on ports sorry about the quality I will make a vid soon on my betta flight settings on my desktop computer and screen record it for you
@954Film I really appreciate you so much, after this explanation you don't have to make a video for me... but thank you very much!☺️
@@Leobronke no problem anytime if you have anymore problems I will send you the link to the vids I used to setup the drone I had to watch like 3 different ones to get all the settings right on the first Pavo I had
@@954Film ur a god🤲
Hey man I found your video after weeks of searching, I’m so close to getting this thing up and running except I can’t get my Pavo20 to arm. I’m using the Dji goggles 2, dji remote 2, and dji o3 air unit with the pavo20. I’m using the dji cable that was included with the o3 hooked up to the drone. In beta flight everything is the same configuration as yours but she simply won’t arm when everything is paired. If you have any advice please let me know, it would be great if I could get your contact info for some help with this. Thanks!
Check to make sure that the little slider under arm is pushed over to the right side
@@954Film hey man that worked! I got it to arm and the motors spin except I ran into another issue where the throttle doesn’t work. Let me know if you have any ideas, I checked betaflight and it detects the throttle from my remote along with everything else but when I unplug, pair everything and arm, the throttle is the only thing that won’t function right. Really appreciate the help so far
@@atkomusic I would check your throttle limits to make sure your throttle is all the way down when you go to arm the drone up
@@954Film ok so I’m in betaflight, drone is hooked up and on with the remote connected, when I move the left stick all the way down, the throttle value is 1000, when the gimbal is centered it’s 1500, and all the way up is 2000. Are these the values you’re referring to under the receiver tab?
@@atkomusicdid u fix it? Mine wont arm
Hey i need your help. My dji controller doesnt work with the pavo, i did the same settings it connects the controller but it has no imputs
I had a Pavo that I had the same problem with and it was a fryed flight controller
@@954Film oh damn..
@@954Film could you send me the settings in good qualiy or uplyit maybe?
@@954Film the imputs also dont work in beta flight, do i have to conmect the battery while its connected to the pc?
@@bato-ui4uv yea when I get home I will copy my beta flight settings and send them to you
Dude fix ur left stick/throttle, it’s messed up bro it ain’t supposed to be springy/bouncy. 👍
I prefer to fly full manual mode with the left stick lose it is far easier.
@@954Film yea I realise that ur flying manual dude, still ur stick is messed up bro. Crank the f2 screw down then adjust f1 till it doesn’t bounce mate.