Видео

bro are you using stock rates for the freestyle? I can't find the right rates for me hahaha

Thanks a lot bro you're a life saver, great video

My printer had this issue, great video thank you for solving my problem.

This is about to take fpv content to another level. Good Stuff!

were you able to get the new o4 or o4 pro yet?

Love the phantom 4. Does well in wind compared to the mavics

Hi bro. I have a problem In betaflight , my port is uart 1 2 3 4 I use geprc taker g435a How can i connect my dji v2 controller to my pavo Thanks

Just got the 03 air unit today and installed it but am wondering if the cable from the drone to the 03 air unit only goes in one way. With my cable connected the red wire is on the right when looking at it from the back. It seemed to click in nice just don't want to fry anything. Thanks

Hello friend, yesterday I received my Pavo 20 Pro and since then I have been fighting with BetaFlight trying to link the RC2 with the drone. It was easy to link the O3 with the V2 and Rc2 googles but I can't see values ​​in the receiver section within betaflight, so I can't assemble or fly the drone. I have all the configurations as you indicate, UART4 enabled for MSP, AURT5 for RX, UART and SBUS receiver mode, but it does not work...

Honestly getting a mini 4k or mini 3 is the play here unless you need/want SDK support. They put flagship camera quality and features into a small drones these days.

What’s the battery life

Thank you so much

Appreciate the set up and explanation!

Love beamers but forever will prefer my Hondas, maybe one day I’ll pick up an e40 or something just to attatched to my vtec family loll

I just got this printer yesterday and I'm contemplating bring it back because of the unbearable buzzing noise coming from the print head. I have no idea where it's coming from. I even used a zip tie to stop the fans from running but the buzzing remains with both fans not running. Does anyone else have this issue also??

Bros listening to people who dont even drive anything close to that price range what a loser push over lamo

e92>

It’s still sexy feel like people have lost their mind with a car needing to be a 0-60 in 2 seconds for it to be good

do you have an "E" plug where all the other plug/wire/connectors are thats extra?

Hey Thanks Man!! You saved me. I had a same issue but this video helped me lot. Thanks!!

with these UART settings are you able to see the osd on your goggles?

you're flying that thing like an idiot around the street like that

Hi do you know how to pull back the filament tube? It sticks out about 10cm and I can't pull it back, it seems stuck

Honestly Id legit ship my pavo 20 pro for you to configure it on betaflight to my controller 2. heck id even pay $100. i tried it all.

Good content man, keep posting.

I have to calm myself down if I even look at the case sitting there. I will sleep walk and fire up my fpv. So glad I found the hobby

*Un video muy bueno compañero y unos giros muy chulos, enhorabuena ya tienes un NUEVO SUSCRIPTOR* 😉👍🏻

Do i need to download ham on the ssd from goggles and drone or just goggles ?

“it flies smooth” …nah you fly smooth. Nice momentum. Enjoyable to watch

So I just got this printer on the 8th from my mom because I wanted one and I payed her back. So she ordered it on the 29th of November and it came on the 8th of December. Keep in mind I’m 12 so I don’t know too much about 3D printing. I haven’t touched it since the 8th and kept it in the box because my dad said that it would get dusty if we assembled it now because I was getting filament for Christmas. So we assembled it on the 23rd and it came with that small bit of white filament. I loaded it up, read the instructions, extruded and retracted it, then started printing one of the already saved on the printer files, the spider. But here’s the problem. It won’t insert any filament. It works just fine, we didn’t do anything wrong and wired it perfectly. I made the nozzle and print bed hotter and adjusted the print head but it still didn’t work. Is this because it’s jammed or is it something else?

Can’t get anything to stay stuck to the bed. I’ve tried glue. I’ve tried blue tape. I’ve tried salt water mixture. I’ve tried sugar water mixture. I’ve heard the temperature up on the bed and on the nozzle. Nothing seems to work. I’ve even went into the settings and slowed everything down. I just can’t seem to figure out how to get this thing to run. If I can’t figure it out in the next couple days I’m just gonna send it back. It’s been a major pain. Any help would be awesome.

how can I print through usb cable with anycubic slicer to my Anycubic Kobra 2 Neo? I don't see that option on the software

Great video's. I'm just starting to get into FPV. I bought the BETAFPV AQUILA16 kit and want to move up to digital. Would this work with the new DJI N3 goggles and radiomaster boxer if I got it with ELRS ? Also, do they sell it with the DJI 03 installed or do I need to buy them separately? Thanks.

I got 2, for son and I, really looking forward to flying it

Did you ever get the LEDs to toggle on/off like the other Pavo20s? Same set up as you with the DJI Goggles and controller 2 and Aux settings. Same mode set up as my Pavo20 (except “User 1” is “LEDLOW” to toggle the LEDs on and off but it doesn’t seem to work on the nightfire edtion

I have a problem with the leveling of the table, the left side is higher than the right side, how can I solve the leveling of the table, I already did the initial configuration and it didn't work, the z offset calibration didn't work either, the unevenness continues

Does it include a battery charger in the package?

I have the phantom 4 pro and it's my favorite!

What lipos are you running in the video? I’m planning on getting this drone soon so I’m curious

Freestyle with cinewhoop? whats next? drift with minivan?

I got it to bind! Had to reupload the firmware on the dji controller using dji assistant. Only issue now is it’s not giving commands to the drone. So I’m sure it’s something with betaflight left. Also I’m surprised your left joystick just stays down in neutral. Mine stays locked in the middle

How do you connect to lights?

thank you for help it is working.

Sweet flight

Let me ask this question if you could hopefully read this question and answer it. So I was wondering why I couldn’t bind my 03 unit to my controller 2. I think it’s because my pavo is an ELR model. So I’m guessing that can’t be compatible.? no matter what I’ve tried to bind them it’s not binding. If there’s anyway around this or if you guys have any extra tips or seen a elrs Pavo with a 03 bind to a dji controller 2 it would be awesome. I did get the 03 unit to buy into the goggles 2. I’m really bummed out. I can’t bind the controller.

Awesome video! Where is the launch pad thing from?

Is the dji fpv better than the pavo20?

Paid 400 Canadian for it.

I just bought a phantom 4 , never used, the owner had it in there closer. Battery is good. My only worry is the support aspect ending for this drone. As a first time drone buyer, how will this affect me? Can I still fly it etc.

I just got that printer and are you trying to tell me I got it for cheaper than you I paid $151 on eBay I guess sometimes Amazon doesn't always have better price but all in all it's a good printer ready to go out of the box as long as you put together all right