Thank you for the kind words Ian 🤝 Its always best to be safe than sorry when them temperatures are low, nothing worse than coming back and seeing frost damage.
Great work, would of been nice for the cameraman to pop the camera over the wall to see the finished article but none the less top notch workmanship 🤙🏼
Thanks andrew 🙂 yeah they can be very different for sure. We chose a few samples for our customer and they liked this one the best. We did too so it was a win win🙂
Thanks mate, I got it done in a place in Newcastle. I cant remember the name but I’l dig it out for you. I got the coat myself from Montane, done my own art work design and they done the embroidery 🙂
Hey Craig, Old broken dog here, Any big jobs lined up, Im a frustrated wannaby brickie who builds small walls piers etc. Wish i'd been brickie instead of a welder, anyway looking forward to yer next video.👍
Cheers John appreciate you dropping in again mate 🙂 there are wannaby brickys who cant build small walls and piers mate, hats of to you John 🤝 I bet you’ve had your fair share of good times as a welder though mate, thats all that counts isn’t it. Big jobs lined up, we have 2 plots of land that we will be working on, one will sit a pair of semis that’l be 4 flats and the other plot is a pair of 3 bed semis. Still a little while to go but its in the pipe line. Got a couple nice extensions coming up on youtube too. Just getting the time to edit them man John. This one has been 6 week or something, bits here and there, falling asleep at the desk haha 😆 The next video is a pointing job with lime mortar and the extensions to follow 🤩
Hey Craig, Thanks for quick and long txt yer must be busy. Glad yer getting some good jobs lined up. Re welding done x-ray work and industrial washers from 150mm thick plate down to 5mm in as confined as a space you can get sweating me bollocks off next to a furnace. It's funny how you develop an interest through youtube. quite pleased we me brick skills (could send yer some to mark outa 10). Mate wants me to build some piers on an existing wall with fencing in between. Do you build one course then level through next to next pier and through till you got all piers same height(level). Thanks in advance 🙂
@@jonmcgill533 thats one thing i cant take, working in crazy heat, it must have been crazy graft that mate 😮💨 I agree with picking up an interest on youtube, its a great place & great tool to learn from like. Go for it Jon, send them over on insta 😍 Building the piers, i’d build two, one either end of the wall and line in the others from them throughout the wall. Hope that makes sense mate, i’l fwd a sketch on IG if not 🙂
Good question that mate, the majority of the time we buy them in ready mixed. We’ve got a couple tubs to pour into if we are mixing our own, but its quite rare to be honest 😃
Hello Craig mate I dropped you a message yesterday about potential helping you out sometimes as I’m wanting to become a bricklayer myself working towards my level 2 , I’m living in south sheilds also so would be ideal
I toddy racing dogs trap 4 and 2 🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🎎🍗🍗🍗🍗🍗🍗🍗💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩
I have experience is for thes work 9eyar and more than, I Am looking job for building and construction general labour work job I Am very hard working person
Great to see a quality tradesman at work ….. awesome job !
Cheers Scott I really appreciate that mate ✊🤝
Работа Мастера!👍👍👍👍👍
Good attention to detail, and professional dedication to coming back at night to wrap the wall in Hessian .
Thank you for the kind words Ian 🤝
Its always best to be safe than sorry when them temperatures are low, nothing worse than coming back and seeing frost damage.
Great job lads.
Appreciate that mate, thank you 🙂🤝
hadnt seen your channel before but ill be a regular here now, nice video bud
Ahhh cheers Brad, I really appreciate that mate. Glad to hear you enjoyed it man 🤝🙂
Lovely bricks,looks fantastic,
Thank you mate 😁 I love them bricks too, nice to lay as well
Great work, would of been nice for the cameraman to pop the camera over the wall to see the finished article but none the less top notch workmanship 🤙🏼
Cheers andy appreciate it 🙂
Your channel has just popped up on my recommendation list.....very decent video. Subbed! 👍
Cheers man Jimmy, I really appreciate that mate.
Plenty more to come, I’ve got around a 3 month backlog of content to get on here 🤣✊
Very nice work ❤
Thank you! Cheers mate
Great work like always lads, enjoyed that again, it was put together really well. Look forward to the pointing yous do next 🙂
Glad you enjoyed it dave 😃
Nice neat job that mate 🧱👌
Cheers Dan, there nice bricks like. Enjoyed using them 🙂
Great work and well filmed 👌
Thank you Tony, I really appreciate that feedback mate 🙂🤝
Great work Craig
Cheers my mate appreciate that 🤩🤝
Lovely looking job ni ce bricks to lay 👍
Cheers mate 🙂 they are lovely to lay and look lovely when its done 🤩
Good job saludos desde españa soy albañil
Thank you marc 🤙 thanks for tuning in from spain 🤩
Lovely skills mate really enjoyed that just subscribed 👍
Ahh thank you mate, I really appreciate the kind comment & I’m super grateful for your sub 🙂🤝
So the 2 stretcher courses just tie in purely at the top brick on edge ?
This was a while ago mate, there will be some ties through out the wall
Great work there!! Could you tell me the ratio you use when mixing please? All the best lads
Cheers Alex 🤝
We use ready mix tubs of mortar.
General practice when mixing your self is 5-6 parts soft sand to 1 part cement for work above ground 🙂
@@CraigToddBrickwork thanks for the reply Craig. Keep the great content up please.
@@alexbourge7156 your welcome Alex, anytime 🙂
I’l try my best with the content, got some great jobs we’ve recorded coming on here soon 😁
Pick n dip with full joints - nice. Rustic bricks can be… variable. Who chose them, you or the customer ?
Thanks andrew 🙂 yeah they can be very different for sure. We chose a few samples for our customer and they liked this one the best. We did too so it was a win win🙂
Hello mate where did you get your coats done they good great ?
Thanks mate, I got it done in a place in Newcastle. I cant remember the name but I’l dig it out for you. I got the coat myself from Montane, done my own art work design and they done the embroidery 🙂
Hey Craig, Old broken dog here, Any big jobs lined up, Im a frustrated wannaby brickie who builds small walls piers etc. Wish i'd been brickie instead of a welder, anyway looking forward to yer next video.👍
Cheers John appreciate you dropping in again mate 🙂 there are wannaby brickys who cant build small walls and piers mate, hats of to you John 🤝 I bet you’ve had your fair share of good times as a welder though mate, thats all that counts isn’t it.
Big jobs lined up, we have 2 plots of land that we will be working on, one will sit a pair of semis that’l be 4 flats and the other plot is a pair of 3 bed semis. Still a little while to go but its in the pipe line. Got a couple nice extensions coming up on youtube too. Just getting the time to edit them man John. This one has been 6 week or something, bits here and there, falling asleep at the desk haha 😆
The next video is a pointing job with lime mortar and the extensions to follow 🤩
Hey Craig, Thanks for quick and long txt yer must be busy. Glad yer getting some good jobs lined up. Re welding done x-ray work and industrial washers from 150mm thick plate down to 5mm in as confined as a space you can get sweating me bollocks off next to a furnace.
It's funny how you develop an interest through youtube. quite pleased we me brick skills (could send yer some to mark outa 10). Mate wants me to build some piers on an existing wall with fencing in between. Do you build one course then level through next to next pier and through till you got all piers same height(level). Thanks in advance 🙂
@@jonmcgill533 thats one thing i cant take, working in crazy heat, it must have been crazy graft that mate 😮💨
I agree with picking up an interest on youtube, its a great place & great tool to learn from like.
Go for it Jon, send them over on insta 😍
Building the piers, i’d build two, one either end of the wall and line in the others from them throughout the wall. Hope that makes sense mate, i’l fwd a sketch on IG if not 🙂
Do you lads buy in your tubs of mortar or do you prepare yourselves before the job. Curious .
Good question that mate, the majority of the time we buy them in ready mixed. We’ve got a couple tubs to pour into if we are mixing our own, but its quite rare to be honest 😃
❤❤❤
Thank you 🙂❤️
Hello Craig mate I dropped you a message yesterday about potential helping you out sometimes as I’m wanting to become a bricklayer myself working towards my level 2 , I’m living in south sheilds also so would be ideal
Ahh sorry I missed that jack, can you drop me another message 👌
@@CraigToddBrickworksent you another message bud hope it’s the right phone number
@@jackbanks6886 cheers mate, got it there 👍 I’l give you a call as soon as I get a minute 👌
I toddy racing dogs trap 4 and 2 🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🍗🎎🍗🍗🍗🍗🍗🍗🍗💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩
Unsure what that means like mate 😆
Really
What do you mean by really?
I have experience is for thes work 9eyar and more than, I Am looking job for building and construction general labour work job I Am very hard working person
Messaged you Ganesh 👍
My Name is Ganesh Ram Kurre from to in INDIA
Hi Ganesh 👋
I can get job your company
Sorry mate I wont be able to help you unless your live local to us in NE England 👍