I love these kinds of videos! You came up with a simple solution for something I never thought of before. Now I am able to make that part I cannot find anywhere for one of my cars because of your brilliant idea. Thanks Keith!
Download the manual to the original Egress 58079 and print out the page containing step 18 in 1:1, then you will have a template for the shape. It also shows the there are 2 small pieces that sits in the holes where the mounts sits. Just an observation and a hint 👍🏼😊
I have the small metal pieces although they really are not needed if the piece of steel you use is a bit thicker like what I used. They are to keep the 8and9 from pushing through the bottom of the arm although it would take a massive slam to the ground for that to happen. Great observation though.
As a racer, I might not have used B8/9 to lay the shocks down more for better control and less body lean in the corners. Under power, the front end will have no issues lifting back up. When the shocks are more straight up and down it can cause traction rolling to be more of an issue and in the corners the body will roll more, and if you don’t have enough adjustment to adjust the roll center, laying the shock down definitely helps with that too.
Great video Keith and bigger picture great cause. Watching the last two videos on this makes you appreciate life and realise somebody somewhere is having a rough time. Just made a donation! Keep up the good work 👍🏻
Sometimes you have to make something that is not being made! I have made a few parts over the years to either get by in a pinch or to make something better or something not being made! Great video and great project for a really good cause. It sucks they are going through all that and they can't get the testing done where they are.
Thanks Keith very much for another mention on your video its greatly appreciated. I started to write an email to you in regards to what has happened but got side tracked due to my wife's Assistance dog being diagnosed with two tutors which unfortunately are inoperable! I will hopefully finish the email soon. Again thank you buddy.
Great job Keith. I am keen to get one to run on the OR at some point as I want to see how much better than the Top Force it really is! Keep up the great content pal 🙌🏻
The go fund me link is in the description although if you want to hear the story behind it, check out my end of summer update video from a few weeks ago.
If you'd like to make you pliars magnetic if you have a magnetic screw tray like a workshop one place the tool in it for a while and it will end up magnetic..
Ya gotta call it a waffle on RUclips.. you’re awesome for doing this Keith. Thanks for everything you do for the community
Lol
Ego is a waffle
@@rcicons4915 haha
Great seeing the raffle proceeds go to an awesome cause!!! That’s part of what makes the RC community so great!
Great idea. Thanks again for sorting my Egress out. I really appreciate it and it's still my pride and joy!
Glad you love it
I love these kinds of videos! You came up with a simple solution for something I never thought of before. Now I am able to make that part I cannot find anywhere for one of my cars because of your brilliant idea. Thanks Keith!
Glad I could help. Should be easy enough for you now.
Videos like this open whole new possibilities us to do wild custom modifications. Great job mate.
great job.... keep it up.... just donated on go fund me.... i hope the best for the family of richard...prayers for speedy recovery.
Love seeing parts being built- shows the skills people have!
Download the manual to the original Egress 58079 and print out the page containing step 18 in 1:1, then you will have a template for the shape. It also shows the there are 2 small pieces that sits in the holes where the mounts sits. Just an observation and a hint 👍🏼😊
I have the small metal pieces although they really are not needed if the piece of steel you use is a bit thicker like what I used. They are to keep the 8and9 from pushing through the bottom of the arm although it would take a massive slam to the ground for that to happen. Great observation though.
As a racer, I might not have used B8/9 to lay the shocks down more for better control and less body lean in the corners. Under power, the front end will have no issues lifting back up. When the shocks are more straight up and down it can cause traction rolling to be more of an issue and in the corners the body will roll more, and if you don’t have enough adjustment to adjust the roll center, laying the shock down definitely helps with that too.
Great video Keith and bigger picture great cause.
Watching the last two videos on this makes you appreciate life and realise somebody somewhere is having a rough time. Just made a donation!
Keep up the good work 👍🏻
I appreciate it as does Richard. They are really struggling right now so it means the world.
Thank you so much Paul for the support it is much appreciated!
Now that’s awesome 😎
The original front end just looks way more aggressive 😅
I totally agree. The Egress just has to have the b8 and 9.
Sometimes you have to make something that is not being made! I have made a few parts over the years to either get by in a pinch or to make something better or something not being made! Great video and great project for a really good cause. It sucks they are going through all that and they can't get the testing done where they are.
Right!
Thanks Keith very much for another mention on your video its greatly appreciated.
I started to write an email to you in regards to what has happened but got side tracked due to my wife's Assistance dog being diagnosed with two tutors which unfortunately are inoperable! I will hopefully finish the email soon. Again thank you buddy.
Great job Keith. I am keen to get one to run on the OR at some point as I want to see how much better than the Top Force it really is! Keep up the great content pal 🙌🏻
Thanks Craig
Awesome job I can confirm. Great video Keith thank you.
Thanks Jason
Great job.
👍
Thanks
Not easy to do this kinda work on camera way to go brother 👍👍👍
Thanks Wade
Awesome video Keith! What’s the info for the go fund me? I’d like to help and enter the giveaway
The go fund me link is in the description although if you want to hear the story behind it, check out my end of summer update video from a few weeks ago.
Thanks In advance Jordan, your support is greatly appreciated.
Awsome job Keith, you’re prob gonna get a lot of prople asking you to make these now 😂
Lol
Happy to do it.
Awesome Keith
👍👍👍
Gauranga
😎💯👍
Thanks
The original egress had titanium screws.
Yes I go through it on the restore. A pain, but great looking. 2 broke. Heads fell right off.
strong work Keith
Thank you
If you'd like to make you pliars magnetic if you have a magnetic screw tray like a workshop one place the tool in it for a while and it will end up magnetic..