Using Drill Batteries to Power Everything! Hacking Your World Episode 1
HTML-код
- Опубликовано: 15 окт 2024
- I have been using these Lithium Ion drill batteries to power many of my projects! Don't forget to subscribe to keep up with my creations!
Let me know if there is anything else you would like me to power with these Battery packs in the comments.
Consider supporting me if you want to invest in the future of my channel!
patreon - / redneckengineer
Instagram: / redneck.engineer
So nice to see another champion of engineering who uses tinkercad instead of some expensive program
broooooo when you plugged your shirt in i spit beer all over my monitor LOL
Genius. I just started thinking about powering my big monster RC trucks with Li-On drill batteries from China Freight and came across your vid. I will def try this.
I powered a castle sidewinder 3 setup on one and it was insane. Definitely worth the shit you'll break and have to replace lol. Axles, gears, control arms
LOL😂😂 I have been using the same set of batteries (about ten ) for the past three years!! I recharge old batteries of all types that I can harvest from old electronics !! Talk about saving the planet ?? Everyone should be doing the same thing. !
yo dude! I know nothing about electricity but you're freaking interesting! you're like a natural behind the camera! LOL. just saying
They are expensive recycling them for personal use is awesome. I use them for Bluetooth speakers. Last so many hours full blast.
I'm working on a 18 volt Makita powered TV. Two parts from Amazon and a clear prison TV.
Theoretical question, i have a car pure sine 300w invertor(max load for my tasks is under 150w) which is rated at 12v (overvoltage protection kicks up at 15.6 ) and bunch of different brand 18v batteries ,all around 4AH, i want to print an enclosure with a step down DC DC converter and a standart cigarette car lighter port. Simple option - 1battery at a time,when it dies just swap the battery, 2nd - connect in series 2 batteries and step down 36 to 12 or 3rd option which i like the most, but not sure - connect 2 or more batteries in parallel with step down 18 to 12 converter, and make them hot-swapable if one of them dies first, but not sure about the circuit. What would you prefer?
18 to 12 would be the most efficient. The voltage difference is small.
The problem with parallel is charging them. Hot swap would probably be better.
Question that I can't seem to find the answer to. I have an RC boat that I built using all the running gear and inner workings of a Duratrax with a 9.6v (or something close) battery. I had a broken drill 18v so I decided to use it's battery to power the boat. BUT, being 18volts its going to fry the ESC and I'm sure other things if I keep pushing it. So I'm wondering how can I use the stock battery for everything except the motor? Like I want the drill battery to power the motor and the stock battery to power the steering servo and the speed controller etc. How do I hook that up? Thanks
Dude, you’re pretty awesome! Just stumbled across your video because I’m planning on designing some kind of compost shredder (lots of tree branch shredders but no compost ones) and I was wondering what size motor to get. But yeah, your video was brilliant.
Thank you for the video!! Got me thinking …. I was out to breakfast this morning and saw a family that had a child (6-8 years old) on a manual wheel chair that was challenged to keep up with the family on the way in : out without being pushed from behind … I was thinking what a wonderful idea it would be if a “simplified bolt on solution” could be added to to the chair to drive a wheel powered by a cordless drill like setup
but seriously bro you are freaking entertaining!
It's so simple, I'm subbing.
LMFAO! IRON MAN SHIRT! AND i want to convert my corded mower to cordless.... and every video ive seen uses a car battery. which is exactly what I don't want. I want to run it off a drill batteries cuz I've got like four of them that I can constantly keep charged. I don't know if you've done this project yet but I'm going to watch the rest of your video. I had to pause and just compliment you first.
Good job....
This is my first time seeing him.
That led shirt really caught me off guard.
I thought it was a skit where the edit would light it up.
How about a fog machine? Or heater for camping, (safe for in a tent). Or a heated blanket? Love the video!
IF YOU CAN'T HACK IT , GET YOUR JACKET. 😂 HEAD ON DOWN THE ROAD !! 😅
How bout a golf cart!!! 😮 I want to see that!!
Haha.. I can't throw anything out either. Ive just made my own adjustable(3-20v) adapter for my drill battery. With switch and BNC socket.. to couple with many old dead tools with added BNC plug.
That was awesome! I hope the Chanel goes well :)
*This is a super cool video. I try to do the same thing at home . I used several different tool batteries on tools from another brand. And I want to many a power station with them soon . Keep going with these projects man they are very inspiring.* 😃 DexterousX
Iv been wondering how much battery power would it take to consistently run a jobsite 10 inch table saw ? Well Normal use for an hour.
awesome video! Im doing the quad conversion possibly today. Im running 2 Milwaukee 18v to replace three 12v lead acid. I was just going to run series and a fuse. can you foresee any issues?
I also have some Ryobi 40v I may try if I don't need to step them down.
Just get a DC to DC step down converter for the 40 volt.
I'm about to do the same. I just acquired 2 40v batteries. I'll be using them with ham radio equipment using a adjustable step down then to a breaker then the radio's fused line. I can run basically 15v to 12.8v with 13.8v being optimal, so I have a margin for error.
I want to power the starter on a 4 Wheeler, and lawnmower, and other stuff with my drill battery. I don't want to maintain batteries on every machine. Can these be strong enough to turn a 12v starter?
I will say I like to see you do drill batteries powering a 20-inch box fan that would be a really popular conversion for people suffering from summer heat and high electric bills
Better yet.. a portable AC or window unit.
Your a genius. Defo sub from me very inspiring bro. Thank You for sharing
Thinks it's possible to do this with a corded vacuum?
I am interested in using my Ridgid power tool batteries to provide power to my sofa and recliner. I know they make battery packs for this, but I have a few extra drill batteries. Would you be willing to help me make it work safely?
I want to power a radio with 2 20v 8ah battery's in parallel, but do I also need some sort of battery balancing? Or is this not needed? Radio runs on main 230 vac, 8 D-cell batteries or a 12V 5a auxiliary port from the car.
I want to power the radio with the D-cell contact port.
so I am going to hook the battery's together in parallel, then an underdischarge protection and after that a step down converter 8 to 40v dc to 12v dc 6ah
Any advice?
I have done a couple of lawnmowers and sometimes you have to fit a thermistor to get them to work.
How do you recommend to do the self study? I've been trying to research making a car or motorcycle battery supply for a drill and router, but having trouble.firguring out how long the battery will last, how to avoid draining it too much amd stuff like that . Any insight is appreciated thanks!
Link for the circuit you use to adjust the volt?
Hi, great video. how would a person use a dewalt 20v battery to heat a cup of water camping?
Can you please share the 3d print file for the battery mounts? I have the exact batteries and want to use them for projects as well
Can you power a trolling motor with these batteries
Buddy u can power a yacht
How about small personal electric heaters?
You don't have to take the PC board out of the inside of the batteries before hooking them together? And what about parallel?
I use one to charge my laptop as backup,
It's 19v so it works great 🙃
Two Makitia Batteries in series for a 36v Stereo amplifier. What is the best way to protect from over discharge? 1. Adding a 36v protection board or 2. Adding individual 12-18v protection board to each makitia adapter? Makitia states that the protection is only in the tool & not in the battery. The bms board inside the battery will not shut it down. Any suggestions?
I would add a protection board with overdischarge, overload, short, etc.
Hi, can you build a vacuum robot from scratch using a power tool batterie? I am interested in building one myself, but I don't know how. Can you recommend literature on how to build electrical engineering?
Can I run a 12 volt bilge pump directly from my 20 volt lithium battery with out a converter???
Shit just make more videos showing the basics this was awesome
You’re awesome man, subbed.
Charge/run them with a solar panel and modify the AC frequency to give a consistent output to handle a window unit AC load. I mean you'll need to keep them cold while discharging. Try using some capacitors on the power wheel to extend recharge life, just don't blow up your kid.
Love this! 😀💙
I really need help powering an Arduino with a drill battery.
I have a buck converter but it just gets really hot and the display won't come on, when I power it with less vintage it works
I have the del battery connected to two cytron md-10c motor driver's
I have been using a separate power supply for the Arduino but that just seems silly. Can someone please help
Blender, let's see a blender
Hey bro I'm trying to make a Tippmann cyclone Speed-Feed that operates with air from the paintball marker I'm trying to turn it into an electric cycling Speed-Feed if there's a way I can show you
Shed Powerwall? Using Solar & old tool batteries.
How about a 12v portable camping cooler?
A backpack (or backpack addition) that has a 20v 5a usb-c pd input and output.
Power ya house on drill battery's haha is that way to tricky
Ever since I was introduced to a little Amazon battery powered fan, and different converters for making batteries fit other tools, it dawned on me that this was possible, and now I want to mod a Nerf gun to run off of these batteries.
The blaster in question, the Rival Perses, runs on a 9.6volt battery pack. So if my tool batteries are 20 volt, I should just need to add a resistor to lower the flow, right..? More testing is required.
Can you show how to convert 18v batteries to power a 36v scooter?
As someone with ADHD I love doing the same things you do, I made a 4S 2P 10,000 mAh li-ion Polymer battery pack for an old car stereo with Bluetooth and wanna make a boom box for it lol.
I also made a 12.6 volt battery for my little brothers New Bright RC Bronco that he likes a lot, lasts forever on one charge. Like, three 5 hours or something. And I use the same battery for a 12V inverter. In my opinion I love that and I think it's so cool.
Can you power a Samsung Bluetooth speaker with this batteries?
How about a Bose sounddock series 2?
240volt inverter
Power an ac power tool
Drone please!!!
👋High af look at them opiate pin 📌 point 👀Eyes ....🤤
okay you did do that project. but then you started talking about boost converters and voltage jumper amp things and you lost me. I need to find a video for dummies
Car